GB/T 42804-2023_English: PDF (GB/T42804-2023)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 42804-2023 | English | 1199 |
Add to Cart
|
7 days [Need to translate]
|
Juvenile products - General requirements for soothing articles bearing children
| Valid |
GB/T 42804-2023
|
| Standard ID | GB/T 42804-2023 (GB/T42804-2023) | | Description (Translated English) | Juvenile products -- General requirements for soothing articles bearing children | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y28 | | Classification of International Standard | 97.190 | | Word Count Estimation | 59,573 | | Date of Issue | 2023-05-23 | | Date of Implementation | 2024-06-01 | | Drafting Organization | Guangzhou Customs Technology Center, Shenzhen Intertek Quality Technology Service Co., Ltd., General Standard Technical Service (Shanghai) Co., Ltd., Mattel Toys Technology Consulting (Shenzhen) Co., Ltd., Hangzhou Baike Industrial Co., Ltd., Shanghai Customs Electromechanical Product Testing Technology Center, Nanjing Customs Light Industry Products and Children's Products Testing Center, Yike Testing and Certification Co., Ltd., Mingmen (China) Children's Products Co., Ltd., Shenzhen Institute of Inspection and Quarantine Science, Shanghai Quality Supervision and Inspection Technology Research Institute, Shenzhen Technology University, Beijing Zhongqinglian Certification Center Co., Ltd., Shantou Customs Technology Center, Shenzhen Institute of Metrology and Quality Inspection, Amazon (China) Investment Co., Ltd. | | Administrative Organization | National Standardization Working Group for Baby Products (SAC/SWG 18) | | Proposing organization | National Standardization Working Group for Baby Products (SAC/SWG 18) | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Management Committee |
GB/T 42804-2023: General technical requirements for load-bearing pacifiers for infant and child products
ICS 97:190
CCSY28
National Standards of People's Republic of China
General technical requirements for load-bearing pacifiers for baby and child products
bearing children
Released on 2023-05-23
2024-06-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface V
1 Range 1
2 Normative references 1
3 Terms and Definitions 2
4 General technical requirements 4
4:1 General 4
4:2 Appearance 4
4:3 Shrinkage performance 4
4:4 Color fastness of textile materials5
4:5 Metal surfaces 5
4:6 Hole, opening 5
4:7 Small parts 5
4:8 Sharp edges and points 5
4:9 Moving parts 5
4:10 Winding 6
4:11 Exposed open pipes and protrusions 7
4:12 Spring 7
4:13 Rocking frequency 7
4:14 Sound 7
4:15 Restraint system 7
4:16 Folding lock mechanism 8
4:17 Static strength8
4:18 Dynamic strength 8
4:19 Durability of Electric Drives 8
4:20 Plastic bags and soft plastic films8
4:21 Logo durability 9
4:22 Combustion performance 9
4:23 Electrical Hazards 9
4:24 Chemical Substance Content Requirements 10
5 Specific product requirements 10
5:1 Angle 10
5:2 Locking mechanism of the handle 11
5:3 Durability of products with handles 12
5:4 Tilting system 12
5:5 Structural integrity of toy bars 12
5:6 Stability 12
5:7 Slip performance 12
6 Test conditions 13
6:1 Sample pretreatment 13
6:2 Test environment 13
6:3 Test sequence 13
6:4 Test equipment accuracy 13
6:5 Test equipment 13
6:6 Determination of protection area 22
6:7 Location of test weights 25
7 General Requirements Test Method 25
7:1 Test of color fastness to perspiration 25
7:2 Test of color fastness to saliva 25
7:3 Test of color fastness to rubbing 25
7:4 Finger entrapment test 25
7:5 Small parts testing 25
7:6 Rope test 26
7:7 Spring test 26
7:8 Swing frequency test 27
7:9 Measurement of sound pressure level 27
7:10 Restraint system test 27
7:11 Test of folding locking mechanism 28
7:12 Static strength test 28
7:13 Dynamic Strength Test 28
7:14 Electric Drive Durability Test 28
7:15 Thickness measurement of plastic film 29
7:16 Sign durability test 29
7:17 Battery Leakage Test 29
7:18 Chemical substance testing 29
8 Specific product test methods 30
8:1 Angle test 30
8:2 Suspension anti-tipping test 34
8:3 Anti-tipping test lifted from the ground 34
8:4 Strength test of handle locking mechanism 35
8:5 Handle Durability Test 36
8:6 Tilting system test 37
8:7 Structural integrity testing of toy bars 37
8:8 Stability test 39
8:9 Slip test 40
9 Identification and Instructions for Use 41
9:1 General requirements 41
9:2 Marking on the product 41
9:3 Marking on the packaging 43
9:4 Markings on the instruction manual 43
Appendix A (informative) Common products intended to bear the weight of children other than this document and their applicable standards 46
Appendix B (informative) Rationale associated with relevant hazards 48
Appendix C (Normative) List of Prohibited Carcinogenic Aromatic Amines 51
Reference 52
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document was proposed and managed by the National Working Group on Standardization of Baby and Child Products (SAC/SWG18):
This document is drafted by: Guangzhou Customs Technology Center, Shenzhen Intertek Quality Technology Service Co:, Ltd:, Standard Technical Service (Shanghai)
Co:, Ltd:, Mattel Toys Technology Consulting (Shenzhen) Co:, Ltd:, Hangzhou Baike Industrial Co:, Ltd:, Shanghai Customs Electromechanical Product Inspection
Technology Center, Nanjing Customs Light Industry Products and Children's Products Testing Center, Yike Testing and Certification Co:, Ltd:, Mingmen (China) Children's Products Co:, Ltd:
Company, Shenzhen Institute of Inspection and Quarantine Science, Shanghai Institute of Quality Supervision and Inspection Technology, Shenzhen University of Technology, Beijing Zhongqinglian Certification Center
Xinxin Co:, Ltd:, Shantou Customs Technology Center, Shenzhen Institute of Metrology and Quality Inspection, Amazon (China) Investment Co:, Ltd:
The main drafters of this document: Li Shili, Chen Yongfeng, Wang Tiejun, Jin Hongtao, Zhang Xiaoning, Zhang Jing, Wang Bin, Ding Zhiyong, Li Zhihao, Wu Xiaojun,
Zhong Kang, Li Yibin, Xu Xiaoguang, Song Zijun, Chen Guofen, Wei Mei, Zhang Caihong, Lin Penghui, Guo Hongzhi, Lu Jianwei:
General technical requirements for load-bearing pacifiers for baby and child products
1 Scope
This document specifies the technical requirements, marking and instructions for use of load-bearing pacifiers, and describes the testing of load-bearing pacifiers:
method:
This document applies to products designed and intended to carry infants and young children at an inclined angle, driven by mechanical or non-mechanical means, through any direction
Products that provide emotional comfort by bouncing, shaking or swinging, including baby bouncers, baby rockers, baby swings, and combination or conversion products:
This document is also applicable to group 0/0 children's car safety devices that comply with GB 27887 and can be used as load-bearing pacifiers according to the manufacturer's instructions:
All seat products:
This document does not apply to children's play and activity centers:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
Only the version corresponding to the date applies to this document; for undated reference documents, the latest version (including all amendments) applies to this document
document:
GB/T 2912:1 Determination of formaldehyde in textiles - Part 1: Free and hydrolyzed formaldehyde (water extraction method)
GB/T 3768-2017 Determination of sound power level and sound energy level of noise source by acoustic sound pressure method
Simple method
GB/T 3785:1-2010 Electroacoustic sound level meter Part 1: Specification
GB/T 3785:2-2010 Electroacoustic sound level meter Part 2: Type evaluation test
GB/T 3920 Tests for color fastness of textiles Color fastness to rubbing
GB/T 3922 Tests for color fastness of textiles Color fastness to perspiration
GB/T 5465:2-2008 Graphical symbols for electrical equipment Part 2: Graphical symbols
GB/T 6031 Determination of hardness of vulcanized rubber or thermoplastic rubber (10IRHD~100IRHD)
GB/T 6672 Plastic Film and Sheet Thickness Determination Mechanical Measurement Method
GB 6675:2-2014 Toy Safety Part 2: Mechanical and Physical Properties
GB 6675:3-2014 Toy Safety Part 3: Flammability
GB 6675:4-2014 Toy Safety Part 4: Migration of Specific Elements
GB/T 17592 Determination of banned azo dyes in textiles
GB/T 17657 Test methods for physical and chemical properties of wood-based panels and veneered wood-based panels
GB/T 18886 Tests for color fastness of textiles Color fastness to saliva
GB/T 19212:8 Safety of power transformers, power supplies, reactors and similar products - Part 8: Transformers and power supplies for toys
Special Requirements and Tests
GB/T 19212:17 Safety regulations for transformers, reactors, power supply units and similar products with power supply voltages up to and including 1100V
Part 17: Particular requirements and tests for switched-mode power supply units and transformers for switched-mode power supply units
GB 19865-2005 Safety of Electric Toys
GB/T 19942 Determination of prohibited azo dyes in chemical tests of leather and fur
GB/T 22048 Determination of Specific Phthalate Plasticizers in Toys and Children's Products
......
|