HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 41588.1-2022 PDF English

US$785.00 · In stock · Download in 9 seconds
GB/T 41588.1-2022: Road vehicles - Controller area network(CAN) - Part 1: Data link layer and physical signalling
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB/T 41588.1-2022English785 Add to Cart 0-9 seconds. Auto-delivery Road vehicles - Controller area network(CAN) - Part 1: Data link layer and physical signalling Valid

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB/T 41588.1-2022
      

Similar standards

GB/T 41588.2   GB/T 41588.3   GB/T 41588.4   GB/T 41590.3   

GB/T 41588.1-2022: Road vehicles - Controller area network(CAN) - Part 1: Data link layer and physical signalling


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT41588.1-2022
NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 43.020 CCS T 35 GB/T 41588.1-2022 / ISO 11898-1.2015 Road Vehicles – Controller Area Network (CAN) – Part 1.Data Link Layer and Physical Signaling (ISO 11898-1.2015, IDT) Issued on: JULY 11, 2022 Implemented on: FEBRUARY 01, 2023 Issued by. State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.

Table of Contents

Foreword... 4 Introduction... 6 1 Scope... 7 2 Normative References... 8 3 Terms and Definitions... 8 4 Symbols and Abbreviated Terms... 13 5 Basic Concepts of CAN... 15 5.1 CAN properties... 15 5.2 Frames... 16 5.3 Bus access method... 16 5.4 Information routing... 16 5.5 Network flexibility... 16 5.6 Data consistency... 17 5.7 Remote data request... 17 5.8 Error detection... 17 5.9 Error signaling and recovery time... 17 5.10 ACK... 17 5.11 Automatic retransmission... 18 5.12 Fault confinement... 18 5.13 Error-active... 18 5.14 Error-passive... 18 5.15 Bus-off... 18 6 Layered Architecture of CAN... 18 6.1 Reference to OSI model... 18 6.2 Protocol specification... 19 6.3 Format description of services... 20 6.4 LLC interface... 21 7 Description of LLC Sub-Layer... 22 7.1 General... 22 7.2 Services of LLC sub-layer... 22 7.3 Functions of LLC sub-layer... 29 7.4 Structure of LLC frames... 30 7.5 Limited LLC frames... 32 8 Interface between LLC and MAC... 33 8.1 Services... 33 8.2 Time and time triggering... 33 8.3 Disabling automatic retransmission... 34 8.4 Message time stamping... 34 9 Description of MAC Sub-Layer... 34 9.1 General... 34 9.2 Services of MAC sub-layer... 34 9.3 Functional model of MAC sub-layer architecture... 40 9.4 Structure of MAC frames... 42 9.5 Frame coding... 54 9.6 Frame acknowledgement... 55 9.7 Frame validation... 55 9.8 Order of bit transmission... 55 9.9 Medium access method... 57 9.10 MAC data consistency... 59 9.11 Error detection... 60 9.12 Error signaling... 61 9.13 Overload signaling... 62 9.14 Bus monitoring... 62 9.15 Restricted operation... 63 10 PL Specification... 63 10.1 General and functional modelling... 63 10.2 Services of PL... 63 10.3 PCS specification... 65 10.4 AUI specification... 76 11 Description of Supervisor FCE... 77 11.1 Fault confinement... 77 11.2 Bus failure management... 82 12 Conformance... 82 Annex A (Informative) Additional Information... 83 A.1 Differences between Classical Frames and FD Frames... 83 A.2 Non-mandatory implementation features... 86 A.3 Implementation hints... 87 Bibliography... 88

Foreword

This document was drafted as per the rules specified in GB/T 1.1-2020 Directives for Standardization – Part 1.Rules for the Structure and Drafting of Standardizing Documents. This Document is Part 1 of GB/T 41588 Road Vehicles – Controller Area Network. GB/T 41588 has published the following parts. --- Part 1.Data Link Layer and Physical Signaling; --- Part 2.High-Speed Medium Access Unit; --- Part 3.Low-Speed Fault-Tolerant, Medium-Dependent Interface; --- Part 4.Time-Triggered Communication. This Document equivalently adopts ISO 11898-1.2015 Road Vehicles – Controller Area Network (CAN) – Part 1.Data Link Layer and Physical Signaling. This Document made the following editorial modifications. --- According to the requirements of GB/T 1.1, transfer the "Consistency" in Clause 2 to Clause 12 of ISO11898-1.2015; --- Add "ISO/IEC 8802-2" to the Normative References in Clause 2. Please note some contents of this Document may involve patents. The issuing agency of this Document shall not assume the responsibility to identify these patents. This Document was proposed by Ministry of Industry and Information Technology of People’s Republic of China. This Document shall be under the jurisdiction of National Technical Committee of Auto Standardization (SAC/TC 114). Drafting organizations of this Document. Zhejiang Geely Holding Group Co., Ltd.; China Automotive Technology and Research Center Co., Ltd.; China FAW Group Co., Ltd.; Great Wall Motor Company Limited; Huizhou Desay SV Automotive Co., Ltd.; Xingkedi Technology (Taizhou) Co., Ltd.; FAW-Volkswagen Automotive Co., Ltd.; Dongfeng Motor Group Company Limited; SAIC GM Wuling Automobile Company Limited; Neusoft Group (Dalian) Co., Ltd.; Pan-Asia Technical Automotive Center Co., Ltd.; CATARC Automotive Test Center (Tianjin) Co., Ltd.; and CATARC (Tianjin) Automotive Engineering Research Institute Co., Ltd. Drafting staffs of this Document. Hu Zhengnan, Zhen Haichuan, Wu Yonghui, Shan Bokai, Zhu Tong, Ji Guotian,, Li Changlong, Liu Bin, Wu Yuzhi, Shi Xiaomi, Lv Liang, Fan Zhirong, Tan Huaqiang, Ding Jie, Sun Wang, Liu Le, Han Guangsheng, Tan Tingyue, Che Changfa, Du Road Vehicles – Controller Area Network (CAN) – Part 1.Data Link Layer and Physical Signaling

1 Scope

This Document specifies the characteristics of setting up an interchange of digital information between modules implementing the CAN data link layer. Controller area network is a serial communication protocol, which supports distributed real-time control and multiplexing for use within road vehicles and other control applications. This Document specifies the Classical CAN frame format and the newly introduced CAN Flexible Data Rate Frame format. The Classical CAN frame format allows bit rates up to 1 Mbit/s and payloads up to 8 byte per frame. The Flexible Data Rate frame format allows bit rates higher than 1 Mbit/s and payloads longer than 8 byte per frame. This Document describes the general architecture of CAN in terms of hierarchical layers according to the ISO reference model for open systems interconnection (OSI) according to ISO/IEC 7498-1.The CAN data link layer is specified according to ISO/IEC 8802-2 and ISO/IEC 8802-3. This Document contains detailed specifications of the following (see Figure 2). --- logical link control sub-layer; --- medium access control sub-layer; --- physical coding sub-layer. There are three implementation options. They are the following. --- support of the Classical CAN frame format only, not tolerating the Flexible Data Rate frame format; --- support of the Classical CAN frame format and tolerating the Flexible Data Rate frame format; --- support of the Classical CAN frame format and the Flexible Data Rate frame format. The last option is recommended to be implemented for new designs. NOTE. Implementations of the first option can communicate with implementations of the third option only as long as the Flexible Data Rate frame format is not used; otherwise, Error Frames are generated. There are opportunities to run implementations of the first option also in CAN networks using the Flexible Data Rate frame format, but these are not in the scope of this Document.

2 Normative References

The provisions in following documents become the essential provisions of this Document through reference in this Document. For the dated documents, only the versions with the dates indicated are applicable to this Document; for the undated documents, only the latest version (including all the amendments) is applicable to this Document. ISO/IEC 7498-1 Information Technology – Open Systems Interconnection – Basic Reference Model. The Basic Model NOTE. GB/T 9387.1-1998 Information Technology - Open Systems Interconnection - Basic Reference Model - Part 1.The Basic Model (ISO/IEC 7498-1.1994, IDT) ISO/IEC 8802-2 Information Technology – Telecommunications and Information Exchange between Systems – Local and Metropolitan Area Networks – Specific Requirements – Part 2.Logical Link Control NOTE. GB/T 15629.2-2008 Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 2.Logical Link Control (ISO/IEC 8802-2.1998, IDT) ISO/IEC 8802-3 Information Technology – Telecommunications and Information Exchange between Systems – Local and Metropolitan Area Networks – Specific Requirements – Part 3.Standard for Ethernet NOTE. GB/T 15629.3-2014 Information Technology - Telecommunications and Information Exchange between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 3.Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer (ISO/IEC 8802-3.2000, MOD)

3 Terms and Definitions

For the purposes of this Document, the following terms and definitions apply. 3.1 Arbitration phase Phase where the nominal bit time is used. 3.2 Bit stuffing ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB/T 41588.1-2022 be delivered?

Answer: The full copy PDF of English version of GB/T 41588.1-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 41588.1-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 41588.1-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB/T 41588.1-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 41588.1-2022?

A step-by-step guide to download PDF of GB/T 41588.1-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 41588.1-2022".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9