|
US$284.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 39271.2-2020: Rolling bearings. Load ratings for hybrid bearings with rolling elements made of ceramic - Part 2: Static load ratings
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 39271.2-2020 | English | 284 |
Add to Cart
|
3 days [Need to translate]
|
Rolling bearings. Load ratings for hybrid bearings with rolling elements made of ceramic - Part 2: Static load ratings
| Valid |
GB/T 39271.2-2020
|
PDF similar to GB/T 39271.2-2020
Basic data | Standard ID | GB/T 39271.2-2020 (GB/T39271.2-2020) | | Description (Translated English) | Rolling bearings. Load ratings for hybrid bearings with rolling elements made of ceramic - Part 2: Static load ratings | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J11 | | Classification of International Standard | 21.100.20 | | Word Count Estimation | 15,128 | | Date of Issue | 2020-11-19 | | Date of Implementation | 2021-06-01 | | Quoted Standard | ISO 76-2006; ISO 5593 | | Adopted Standard | ISO 20056-2-2017, IDT | | Regulation (derived from) | National Standard Announcement No. 26 of 2020 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | | Summary | This standard specifies the calculation method for the static load rating of hybrid bearings whose bearing rings are made of contemporary high-quality hardened bearing steel and are made according to good processing methods, and the rolling elements are made of contemporary high-quality silicon nitride (Si3N4). ISO 3290-2 and ISO 26602 apply to ceramic balls; ISO 12297-2 and ISO 26602 apply to ceramic rollers. When using hybrid bearings, see Table 1 and Table 2 for the reference value of static safety factor S0. | GB/T 39271.2-2020: Rolling bearings. Load ratings for hybrid bearings with rolling elements made of ceramic - Part 2: Static load ratings
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rolling bearings - Load ratings for hybrid bearings with rolling elements made of ceramic - Part 2.Static load ratings
ICS 21.100.20
J11
National Standards of People's Republic of China
Ceramic rolling element hybrid bearings for rolling bearings
Rated Load Part 2.Static Load Rated
2020-11-19 released
2021-06-01 implementation
State Administration for Market Regulation
Issued by the National Standardization Management Committee
Foreword
GB/T 39271 "Rating load of hybrid bearings with ceramic rolling elements for rolling bearings" is divided into two parts.
---Part 1.Rated dynamic load;
---Part 2.Rated static load.
This part is Part 2 of GB/T 39271.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
The translation method used in this part is equivalent to the ISO.20056-2.2017 ``Rated Load of Ceramic Rolling Element Hybrid Bearing for Rolling Bearings''
Part 2.Static Load Rating.
The Chinese documents that have a consistent correspondence with the international documents cited in this section are as follows.
---GB/T 4662-2012 Rolling bearing static load rating (ISO 76.2006, IDT)
---GB/T 6930-2002 rolling bearing vocabulary (ISO 5593.1997, IDT)
This part was proposed by China Machinery Industry Federation.
This part is under the jurisdiction of the National Rolling Bearing Standardization Technical Committee (SAC/TC98).
Drafting organizations of this section. Luoyang Bearing Research Institute Co., Ltd., Zhejiang Wuzhou Xinchun Group Co., Ltd., Cixing Group Co., Ltd.,
Chongqing Changjiang Bearing Co., Ltd., Shanghai Tianan Bearing Co., Ltd.
The main drafters of this section. Li Feixue, Du Xiaoyu, Li Xiaofeng, Song Li, Zhao Xingxin, Zhuang Renjie, Ma Renjie.
Introduction
Hybrid bearings are rolling bearings with rolling elements made of silicon nitride and rings made of common bearing steel (see ISO 5593 for definition). due to
Ceramic rolling elements have a higher modulus of elasticity. Under the same load conditions, hybrid bearings have more advantages than steel rolling element bearings.
Small contact ellipse, which will lead to increased contact stress under the same load.
Since the second edition of ISO 76 was released in 1987, the static load capacity of rolling bearings is allowed by the maximum rolling element load contact.
The Hertz contact stress is determined. In steel rolling bearings, this contact stress causes about 1/10000 times of rolling at the contact between the raceway and the rolling element.
The permanent plastic deformation of the diameter of the moving body; in the hybrid bearing, no obvious plastic deformation occurs on the rolling elements, so the total rolling contact is caused.
Plastic deformation is small. Therefore, according to industrial practice, a slightly higher allowable Hertzian stress is specified for hybrid bearings, which also improves Jing'an
The reference value of the full coefficient S0 to maintain the same overall safety as the raceway.
Ceramic rolling element hybrid bearings for rolling bearings
Rated Load Part 2.Static Load Rated
1 Scope
This part of GB/T 39271 stipulates that the bearing ring is made of contemporary high-quality hardened bearing steel and is made according to good processing methods.
The dynamic body is a calculation method for the static load rating of a hybrid bearing made of high-quality silicon nitride (Si3N4). ISO 3290-2[1] and
ISO 26602[4] applies to ceramic balls; ISO 12297-2[2] and ISO 26602[4] apply to ceramic rollers.
When using hybrid bearings, see Table 1 and Table 2 for the reference value of static safety factor S0.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
ISO 76.2006 Static load rating of rolling bearings
ISO 5593 rolling bearing vocabulary
3 Terms and definitions
The following terms and definitions defined by ISO 5593 and ISO 76 apply to this document.
The website of the terminology database used in the standardization work maintained by ISO and IEC is as follows.
3.1
Radial basic static load rating
The radial static load corresponding to the following calculated contact stress is generated at the contact center of the maximum load rolling element and the raceway.
---4600MPa radial ball bearings, including self-aligning ball bearings;
---4200MPa radial roller bearings.
Note 1.For single row angular contact ball bearings, the radial static load rating refers to the radial component of the load that causes a pure radial displacement between the bearing rings.
Note 2.The contact stress limit given in this definition is only valid for rolling elements made of silicon nitride with an elastic modulus of 300,000 MPa or higher.
For rolling elements made of ceramics with low elastic modulus, the contact stress limit in ISO 76 applies.
3.2
Axial basic static load rating
The center axial static load corresponding to the following calculated contact stress is generated at the contact center of the maximum load rolling element and the raceway.
---4600MPa thrust ball bearing;
---4200MPa thrust roller bearing.
Note 1.For tapered rollers, the applicable roller diameter is equal to the average of the imaginary theoretical sharp corner diameters at the large and small ends of the roller.
Note 2.For asymmetric spherical rollers, the applicable roller diameter is the approximate value of the diameter at the contact point of the roller and the raceway without ribs under zero load.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 39271.2-2020_English be delivered?Answer: Upon your order, we will start to translate GB/T 39271.2-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 39271.2-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 39271.2-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|