Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169759 (May 2, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   Cart
  

GB/T 3903.7-2019 (GBT 3903.7-2019)

Chinese Standard: 'GB/T 3903.7-2019'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)Related StandardStatusGoogle Book
GB/T 3903.7-2019English100 Add to Cart 0--10 minutes. Auto-delivered. Footwear -- Test methods for whole shoe -- Ageing conditioning GB/T 3903.7-2019 Valid GB/T 3903.7-2019
GB/T 3903.7-2019Chinese16 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]  

  In 0~10 minutes time, full copy of this English-PDF will be auto-delivered to your email. See samples for translation quality.  

BASIC DATA
Standard ID GB/T 3903.7-2019 (GB/T3903.7-2019)
Description (Translated English) Footwear - Test methods for whole shoe - Ageing conditioning
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard Y78
Classification of International Standard 61.060
Word Count Estimation 6,630
Date of Issue 2019-08-30
Date of Implementation 2020-03-01
Older Standard (superseded by this standard) GB/T 3903.7-2005
Drafting Organization China Leather Shoes Research Institute Co., Ltd., Quanzhou Ryukyu Shoes Co., Ltd., Jihua 3515 Leather Shoes Co., Ltd.
Administrative Organization National Technical Committee for Standardization of Footwear (SAC/TC 305)
Regulation (derived from) National Standard Announcement No. 10 of 2019
Proposing organization China Light Industry Federation
Issuing agency(ies) State Administration of Markets and China National Standardization Administration

GB/T 3903.7-2019
Footwear - Test methods for whole shoe - Ageing conditioning
ICS 61.060
Y78
National Standards of People's Republic of China
Replace GB/T 3903.7-2005
Footwear test method
(ISO 20870.2017, Footwear-Ageingconditioning, IDT)
Published on.2019-08-30
2020-03-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB/T 3903.7-2005 "Aging treatment of general test methods for footwear", compared with GB/T 3903.7-2005, the main
The technical changes are as follows.
--- Revised the normative reference document (see Chapter 2, Chapter 2 of the.2005 edition);
--- Revised terms and definitions (see Chapter 3, Chapter 3 of the.2005 edition);
--- Revised the test report (see Chapter 8, Chapter 8 of the.2005 edition);
--- The full text changes "heating aging" to "dry heat aging"; "humidification aging" is modified to "wet heat aging".
This section uses the translation method equivalent to ISO 20870.2017 "shoe aging treatment".
The documents of our country that have a consistent correspondence with the international documents referenced in this part are as follows.
---GB/T 22049-2019 Standard environment for environmental conditioning and testing of footwear footwear and footwear components (ISO 18454.2018,
IDT);
---GB/T 22050-2008 Sampling position, preparation and environmental adjustment time of footwear samples and samples (ISO 17709.2004,
IDT).
This section has made the following editorial changes.
--- In line with the existing standard series, the standard name was changed to "aging treatment of footwear whole shoes test method".
Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents.
This part was proposed by the China Light Industry Federation.
This part is under the jurisdiction of the National Technical Committee for the Standardization of Footwear (SAC/TC305).
This section drafted by. China Leather Shoes Research Institute Co., Ltd., Quanzhou Ryukyu Shoes Co., Ltd., Jihua 3515 leather shoes
Limited.
The main drafters of this section. Shao Lijun, Yang Yumei, Zhou Sujing, Chen Jingyi, Wu Ting.
The previous versions of the standards replaced by this section are.
---GB/T 3903.7-2005.
Footwear test method
1 Scope
This part of GB/T 3903 specifies test methods for simulating the effects of naturally occurring reactions. Determination of the sample before and after the aging treatment
Physical properties. The effect of aging treatment on any physical properties of the sample may be determined.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
ISO 17709 Sampling position, preparation and environmental conditioning time for footwear samples and specimens (Footwear-Samplinglocation,
Preparationanddurationofconditioningofsamplesandtestpieces)
ISO 18454 Standard environment for environmental conditioning and testing of footwear footwear and footwear components (Footwear-Standardatmospheres
Forconditioningandtestingoffootwearandcomponentsforfootwear)
3 Terms and definitions
The terms and definitions defined by ISO 17709 and ISO 18454 apply to this document.
The ISO and IEC standardized terminology database addresses are as follows.
4 Test equipment and materials
4.1 Dry heat aging test
4.1.1 The oven has a forced circulation system that maintains the temperature within the range of (70 ± 2) °C.
4.2 Damp heat aging test
4.2.1 Aging test equipment shall be sized to ensure that the total volume of the sample does not exceed 10% of the free air space. The sample is completely free to stretch,
All parts of the sample are in aging air and placed in the dark.
4.2.2 Glass container, placed in a glass container with a suitable plug to place the sample, so that the sample to be tested is in the air with a relative humidity of 100%, with water
Use a bath or oven to heat the glass container and keep it at (70 ± 2) °C.
5 Sampling and environmental conditioning
The selection of the number, size and shape of the sample is determined by the nature of the test, and the specific test specified in ISO 17709 prior to the aging test.
The sample size is sampled.
6 test steps
Physical properties are measured after environmental conditioning, and the specimens should be placed in an aging environment immediately. Dry heat aging process and wet heat
The time of the process is (168 ± 2) h.
After the aging treatment, the sample was adjusted for 24 h according to ISO 18454 before the test.
7 test results expression
The rate of change X of the sample performance is expressed as a percentage (%) and is calculated according to formula (1).
X=
Xa-X0
X0 ×
100% (1)
In the formula.
Xa---the average performance value after aging;
X0---the av......
Related standard: GB/T 3903.13-2020    GB/T 3903.26-2020
Related PDF sample: GB/T 3903.5-2011    GB/T 3903.4-2017