Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169759 (Feb 28, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

GB/T 38186-2019

Chinese Standard: 'GB/T 38186-2019'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
GB/T 38186-2019English130 Add to Cart 0--10 minutes. Auto immediate delivery. Performance requirements and test methods for advanced emergency braking system (AEBS) of commercial vehicles Valid GB/T 38186-2019
GB/T 38186-2019Chinese16 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]

  In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.  

BASIC DATA
Standard ID GB/T 38186-2019 (GB/T38186-2019)
Description (Translated English) Performance requirements and test methods for advanced emergency braking system(AEBS) of commercial vehicles
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard T24
Classification of International Standard 43.040.40
Word Count Estimation 10,130
Date of Issue 2019-10-18
Date of Implementation 2020-05-01
Drafting Organization FAW Jiefang Automobile Co., Ltd., Anhui Jianghuai Automobile Group Co., Ltd., China Automotive Technology and Research Center Co., Ltd., Dongfeng Commercial Vehicle Co., Ltd., Tsinghua University, Chongqing Vehicle Inspection and Research Institute Co., Ltd., Shanghai Motor Vehicle Inspection and Certification Technology Research Center Co., Ltd. China Automotive Engineering Research Institute Co., Ltd., WABCO Automotive Control Systems (China) Co., Ltd., Zhejiang Wanan Technology Co., Ltd., Zhejiang Asia-Pacific Mechanical and Electrical Co., Ltd., Jiaozuo Borek Control Technology Co., Ltd., Xiamen Jinlong United Automotive Industry Co., Ltd. Co., Ltd., Jinlong United Automotive Industry (Suzhou) Co., Ltd., Xiamen Jinlong Wagon Co., Ltd., Beiben Heavy Vehicle Group Co., Ltd., Neusoft Ruichi Automotive Technology (Shenyang) Co., Ltd.
Administrative Organization National Automotive Standardization Technical Committee (SAC/TC 114)
Proposing organization Ministry of Industry and Information Technology of the People's Republic of China
Issuing agency(ies) State Administration of Markets and China National Standardization Administration

GB/T 38186-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.040.40
T 24
Performance requirements and test methods for
advanced emergency braking system (AEBS) of
commercial vehicles
商用车辆自动紧急制动系统(AEBS)性能要求及试验方法
ISSUED ON: OCTOBER 18, 2019
IMPLEMENTED ON: MAY 01, 2020
Issued by: State Administration for Market Regulation;
Standardization Administration of the PRC.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Terms and definitions ... 5 
4 Technical requirements ... 6 
5 Test methods ... 10 
Appendix A (Normative) Functional safety requirements ... 13 
Performance requirements and test methods for
advanced emergency braking system (AEBS) of
commercial vehicles
1 Scope
This Standard specifies the terms and definitions, technical requirements, and
test methods for advanced emergency braking system (AEBS) of commercial
vehicles.
This Standard applies to M2, M3, and N type vehicles equipped with an
advanced emergency braking system (AEBS).
2 Normative references
The following documents are indispensable for the application of this document.
For the dated references, only the editions with the dates indicated are
applicable to this document. For the undated references, the latest edition
(including all the amendments) are applicable to this document.
GB/T 3730.1-2001 Motor vehicles and trailers - Types - Terms and definitions
GB 4094-2016 Motor vehicles - Symbols for controls, indicators and tell-tales
GB/T 5620 Road vehicles - Braking of automotive vehicles and their trailers
- Vocabulary
GB 12676-2014 Technical requirements and testing methods for commercial
vehicle and trailer braking systems
GB/T 13594 Antilock braking performance and test procedure for motor
vehicles and their trailers
GB/T 34590-2017 (all parts) Road vehicles - Functional safety
GB 34660-2017 Road vehicles - Requirements and test methods of
electromagnetic compatibility
collision may occur in the front to the time before the emergency braking phase
of the vehicle.
3.9 Common space
The area in which two or more information functions (such as flags) can be
displayed asynchronously.
[GB 4094-2016, definition 3.6]
3.10 Self-check
The act of automatically checking the AEBS failure and testing its functions in
a semi-continuous manner before the AEBS starts.
3.11 Time to collision; TTC
The time obtained by dividing the distance between the subject vehicle and the
target by the instantaneous relative speed of the subject vehicle and the target.
4 Technical requirements
4.1 General requirements
4.1.1 Vehicles equipped with AEBS shall be equipped with an antilock braking
system which meets the requirements of GB/T 13594.
4.1.2 The electromagnetic compatibility of AEBS shall meet the requirements
of GB 34660-2017.
4.1.3 The functional safety of AEBS shall meet the requirements of Appendix A.
4.1.4 The vehicle manufacturer shall, in the vehicle instruction manual, explain
the early-warning and warning signal indication methods and the order of
warning to the driver.
4.2 Early-warning and warning signals
4.2.1 The AEBS shall be able to provide the driver with the appropriate early-
warning and warning signals as follows:
a) When the AEBS detects a possible collision with an M, N, or O type vehicle
which may be traveling at a lower speed, decelerating, or stationary in the
same lane ahead, it shall send a collision early-warning signal. The early-
warning signal shall comply with the provisions of 4.2.2.
b) In the event of an AEBS failure which may prevent compliance with the
phase, so that the speed of the subject vehicle is significantly reduced;
b) Except for manual off according to 4.5, AEBS, under all load conditions of
the vehicle, shall operate normally at least between 15 km/h and the
maximum design speed;
c) In cases where the driver does not believe that there will be a collision with
the vehicle in front, the AEBS design shall minimize the sending of
collision early-warning signals and avoid automatic braking.
4.3.2 Early-warning and startup performance under stationary target
conditions
4.3.2.1 TEST according to 5.4. The time setting of the collision early-warning
mode described in 4.2 shall meet the following requirements:
a) The subject vehicle begins to use one mode of acoustics, tactile sense,
and optics for early-warning no later than the following time:
- 1.4 s before the start of the emergency braking phase for vehicles of air
braking system;
- 0.8 s before the start of the emergency braking phase for M2 and M3 type
vehicles with assisted hydraulic braking system and N2 type vehicles with
a maximum design total mass less than or equal to 8 t.
b) The subject vehicle begins to use two modes of acoustics, tactile sense,
and optics for early-warning no later than the following time:
- 0.8 s before the start of the emergency braking phase for vehicles of air
braking system;
- Before the start of the emergency braking phase for M2 and M3 type
vehicles with assisted hydraulic braking system and N2 type vehicles with
a maximum design total mass less than or equal to 8 t.
4.3.2.2 The speed decline in the warning phase shall not exceed 15 km/h or 30%
of the total speed decline of the test vehicle, whichever is higher.
4.3.2.3 The collision warning phase shall be followed by the emergency braking
phase.
4.3.2.4 The total speed decline of the subject vehicle when colliding with a
stationary target shall not be less than 10 km/h.
4.3.2.5 The emergency braking phase shall not begin before the time to collision
is less than or equal to 3 s.
a) The AEBS shall, when the vehicle is ignited, automatically restore to
normal working state;
b) After the AEBS function is turned off, it shall be able to send the driver a
constant yellow optical warning signal in accordance with the provisions
of GB 4094-2016.
4.6 Anti-false response performance
TEST according to 5.8. The AEBS shall not send a collision early-warning and
shall not activate the emergency braking function.
5 Test methods
5.1 Test conditions
5.1.1 The test environment shall comply with the provisions of 5.1.2 of GB
12676-2014.
5.1.2 The horizontal visual range shall ensure that the target can be observed
throughout the test.
5.2 Vehicle conditions
5.2.1 Vehicle load
The vehicle shall be tested under the load conditions specified by the
manufacturer. After the test starts, it shall not make any adjustments to the
vehicle load.
5.2.2 Tire
The tires used in the test shall be run-in to a normal state. The tire pressure
shall be the cold inflation pressure value recommended by the vehicle
manufacturer.
5.2.3 Brake
The subject vehicle shall, in accordance with the provisions of 5.1.1.2 of GB
12676-2014, run-in the brake.
5.3 Test target
5.3.1 The test may adopt an ordinary passenger car or a soft target.
5.3.2 Specific measures to ensure consistency and repeatability of targets shall
be documented in detail in the vehicle test report.
5.7 Driver intervention performance
5.7.1 TEST according to 5.5. In the warning phase, the driver steps on the
accelerator pedal, turns on the turn signal, performs other means specified by
the manufacturer, to check whether the response of the system can be
interrupted by the active action of driver intervention.
5.7.2 TEST according to 5.5. In the emergency braking phase, the driver steps
on the accelerator pedal, turns on the turn signal, performs other means
specified by the manufacturer, to check whether the response of the system
can be interrupted by the active action of driver.
5.7.3 For vehicles equipped with an AEBS release device, set the ignition switch
to the "on" (run) position and release the AEBS, to check if the warning signal
is lit. SET the ignition switch to the "off" (flameout) position. Then, set the ignition
switch to the "on" (run) position again, to confirm that whether the warning
signal which was previously lit is lit. If the ignition system is activated by a key,
the above operation shall be performed without removing the key at all times.
5.8 System anti-false response performance
5.8.1 PUT two ordinary passenger cars defined in GB/T 3730.1-2001 as follows:
a) The driving direction is the same as that of the subject vehicle;
b) The inside of the two cars is 4.5 m apart;
c) The tails of the two cars are aligned.
5.8.2 The subject vehicle, from outside at least 60 m, begins to pass through
the middle of two stationary vehicles at a constant speed of (50±2)km/h. Except
for slight adjustment of the steering wheel to prevent the vehicle from shifting
in direction, during the test, it shall not make any adjustments to the subject
vehicle.
A.2.2 Definition of related items
A.2.2.1 It shall describe the functional concept of the related items and provide
a list of functional descriptions. The related item AEBS may include an
environmental awareness system, a control system, an execution system, a
driver information interaction system, etc.
Note: Describe the functions which are perceptible from the vehicle level and refine them.
A.2.2.2 It shall define the scope of the related items and the systems and
elements belonging to the related items and identify the external systems or
elements with which they interact.
A.2.2.3 It shall define the operating conditions and constraints of the related
items, and for the corresponding system functions, explain the boundaries of
the effective working range.
Example: Common operating conditions include power supply, speed, etc. Common
constraints include ambient temperature, humidity, vibration, etc.
A.2.2.4 It shall provide a schematic diagram (for example, a module diagram)
to illustrate the architecture of the related items and their internal and external
interfaces. In the schematic diagram, use serial number to indicate the
components, external interface systems, internal and external interface
channels of the related......
Related standard: GB/T 38185-2019    GB/T 37336-2019
Related PDF sample: GB/T 38185-2019    GB/T 37336-2019