Search result: GB/T 3810.6-2016 (GB/T 3810.6-2006 Older version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 3810.6-2016 | English | 154 |
Add to Cart
|
3 days [Need to translate]
|
Test methods of ceramic tiles -- Part 6: Determination of resistance to deep abrasion for unglazed tiles
| Valid |
GB/T 3810.6-2016
|
| GB/T 3810.6-2006 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Test methods of ceramic tiles -- Part 6: Determination of resistance to deep abrasion for unglazed tiles
| Obsolete |
GB/T 3810.6-2006
|
| GB/T 3810.6-1999 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Test methods of ceramic tiles-- Part 6: Determination of resistance to deep abrasion for unglazed tiles
| Obsolete |
GB/T 3810.6-1999
|
| Standard ID | GB/T 3810.6-2016 (GB/T3810.6-2016) | | Description (Translated English) | Test methods of ceramic tiles -- Part 6: Determination of resistance to deep abrasion for unglazed tiles | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q31 | | Classification of International Standard | 91.100.25 | | Word Count Estimation | 8,899 | | Date of Issue | 25/4/2016 | | Date of Implementation | 2017-03-01 | | Older Standard (superseded by this standard) | GB/T 3810.6-2006 | | Drafting Organization | Xianyang Ceramics Research and Design Institute, Hangzhou Nobel Group Co., Ltd., Guangdong Mona Lisa New Materials Group Co., Ltd., Guangdong Xinghui Ceramics Group Co., Ltd., Guangdong Dongpeng Holdings Co., Ltd., Ministry of Industry and Information Technology of Building Sanitary Ceramics and Sanitary Ware Product Quality Control Technology Evaluation Lab | | Administrative Organization | National Building Sanitary Ceramics Standardization Technical Committee (SAC/TC 249) | | Regulation (derived from) | National Standard Announcement No | | Proposing organization | China Building Materials Federation | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, Standardization Administration of the People Republic of China |
GB/T 3810.6-2016
Test methods of ceramic tiles - Part 6. Determination of resistance to deep abrasion for unglazed tiles
ICS 91.100.25
Q31
National Standards of People's Republic of China
Replacing GB/T 3810.6-2006
Test method for ceramic tiles
Part 6. determination of wear depth of unglazed tiles
Testmethodsofceramictiles-Part 6. Determination of
(ISO 10545-6..2010, Ceramictiles-Part 6. Determination ofresistanceto
deepabrasionforunglazedtiles, IDT)
2016-04-25 released
2017-03-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Preface
GB/T 3810 "ceramic tile test method" is divided into 16 parts.
- Part 1. Sampling and receiving conditions;
- Part 2. Inspection of dimensions and surface quality;
- Part 3. Determination of water absorption, apparent porosity, apparent relative density and bulk density;
- Part 4. Determination of fracture modulus and failure strength;
- Part 5. Determining the impact resistance of a brick with a recovery factor;
- Part 6. Determination of wear depth of unglazed tiles;
- Part 7. Determination of abrasion resistance of glazed tiles;
- Part 8. Determination of linear thermal expansion;
- Part 9. Determination of thermal shock resistance;
- Part 10. Determination of wet expansion;
- Part 11. Determination of glaze resistance of glazed tiles;
- Part 12. Determination of frost resistance;
- Part 13. Determination of resistance to chemical corrosion;
- Part 14. Determination of resistance to contamination;
- Part 15. Determination of lead and cadmium elution of glazed tiles;
- Part 16. Determination of small chromatic aberration.
This part is part 6 of GB/T 3810.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part of the replacement GB/T 3810.6-2006 "ceramic tile test method Part 6. no glaze brick wear depth determination."
This part of the main changes compared with GB/T 3810.6-2006 as follows.
--- modified the reference file (see Chapter 2, Chapter 2 of the.2006 edition);
--- modified abrasive requirements (see 4.3, version 4.3);
--- The corresponding values of chord length and volume are modified (see Table 1, version 1.26).
This part uses the translation method equivalent to ISO 10545-6..2010 "Ceramic tiles Part 6. Determination of wear-resistant depth of glazed tiles" (English
Version).
In this part of the normative reference to the international documents have a consistent correspondence between the following documents.
GB/T 2481.1-1998 Determination and characterization of abrasive particle size composition for consolidation abrasives - Part 1. Coarse abrasive grains F4 ~
F220 (eqvISO 8486-1..1996)
This section makes the following editorial changes.
--- Standard name changed to "Ceramic tile test method Part 6. Determination of wear depth of glazed tiles".
This section is proposed by the China Building Materials Federation.
This part of the National Building Sanitary Ceramics Standardization Technical Committee (SAC/TC249) centralized.
This part of the drafting unit. Xianyang Ceramic Research and Design Institute, Hangzhou Nobel Group Co., Ltd., Guangdong Mona Lisa New Materials Group
Limited, Guangdong Xinghui Ceramics Group Co., Ltd., Guangdong Dongpeng Holding Co., Ltd., Ministry of Industry and Information Technology Building Sanitary Ceramics and Wei
Bath product quality control technology evaluation laboratory.
The main drafters of this section. Duan Xianhu, Wang Bo, Li Ying, Zhang Qikang, Chen Hongzhe, Jin Guoting.
This part of the previous version of the standard to replace the release of the situation.
--- GB/T 13479-1992;
GB/T 3810.6-1999, GB/T 3810.6-2006.
Test method for ceramic tiles
Part 6. determination of wear depth of unglazed tiles
1 Scope
This part of GB/T 3810 specifies the test method for deep wear of glazed tiles for all kinds of flooring.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
ISO 630-1 structural steel - Part 1. General technical delivery conditions for hot rolled products (Structuralsteels-Plates, wide
flats, bars, sectionsandprofiles)
ISO 8486-1 Determination and marking of abrasive grain size composition for consolidated abrasives - Part 1. Coarse abrasive grains F4 to F220 (Bonded
abrasives-Determinationanddesignationofgrainsizedistribution-Part 1. MacrogritsF4toF220)
3 principle
In the case of specified conditions and abrasive in the case of friction by the wheel in the brick rotation of the front of the grinding pit, measured by the length of the measured pit
The abrasion resistance of glazed tiles.
4 equipment
4.1 wear test machine (see Figure 1).
It consists of a friction wheel, a hopper with an abrasive feed device, a sample holder and a counterweight. Friction wheel is
Made of ISO 630-1 steel, the diameter is.200mm ± 0.2mm, the edge thickness is 10mm ± 0.1mm, the speed is 75r/min.
The specimen is subjected to the reverse pressure of the friction wheel and is passed through the corundum adjustment test machine. Pressure adjustment with F80 (ISO 8486-1) corundum
After the abrasive 150 turns, a grinding pit with a chord length of 24 mm ± 0.5 mm is produced. Quartz glass as a basic standard can also be used float glass or
Other applicable materials.
When the friction wheel wears to 0.5% of the original diameter, the grinding wheel must be replaced.
4.2 Measuring tool with measuring accuracy of 0.1mm.
4.3 abrasive.
Conforms to F80 as specified in ISO 8486-1. Grinding materials that produce the same result can also be used.
5 samples
5.1 Sample type
Using the whole brick or the appropriate size of the sample to do the test. If it is a small sample, try to stick a small sample with a binder in a piece
Larger template on.
5.2 Preparation of the sample
Use a clean, dry sample.
......
|