GB/T 38008-2019 PDF English
US$260.00 · In stock · Download in 9 secondsGB/T 38008-2019: Gate valves of thermoplastics materials Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 38008-2019 | English | 260 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Gate valves of thermoplastics materials
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 38008-2019
GB/T 38008-2019: Gate valves of thermoplastics materials---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT38008-2019
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.140.30
G 33
Gate Valves of Thermoplastics Materials
(ISO 16139.2006, Industrial Valves - Gate Valves of Thermoplastics
Materials, MOD)
Issued on. AUGUST 30, 2019
Implemented on. MARCH 1, 2020
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword... 3
1 Scope... 6
2 Normative References... 6
3 Terms, Definitions and Symbols... 7
4 Materials... 11
5 Design... 13
6 Requirements... 15
7 Test Methods... 20
8 Inspection Rules... 22
9 Markings, Packaging, Transportation and Storage... 24
Appendix A (informative) Comparison between Nominal Outer Diameter dn and
Nominal Size DN... 26
Appendix B (informative) Purchasing Information... 27
Bibliography... 28
Foreword
This Standard was drafted in accordance with the rules in GB/T 1.1-2009.
This Standard adopts the re-drafting method in the modification and adoption of ISO
16139.2006 Industrial Valves - Gate Valves of Thermoplastics Materials.
In comparison with ISO 16139.2006, this Standard has the following structural changes.
---“Symbols” is added to “Terms and Definitions” (see 3.4);
---Chapter 4 “Requirements” of ISO 16139.2006 are divided into “Materials”,
“Design” and “Requirements” (see Chapter 4 ~ Chapter 6);
---The contents of 4.7.2 and 4.8 in ISO 16139.2006 are deleted;
---Chapter 5 “Inspection Procedures” of ISO 16139.2006 is divided into “Test
Methods” and “Inspection Rules” (see Chapter 7 and Chapter 8);
---Chapter 6 of ISO 16139.2006 is deleted;
---Chapter 7 “Markings” and Chapter 8 “Transportation and Storage” of ISO
16139.2006 are combined into “Markings, Packaging, Transportation and
Storage” (see Chapter 9);
---The comparison between nominal outer diameter dn and nominal size DN is
added (see Appendix A);
---Appendix A of ISO 16139.2006 is adjusted to Appendix B.
In comparison with ISO 16139.2006, the main technical differences and the causes for
these differences are as follows.
---The pressure class is deleted (see Chapter 1), and uniform use of metric units
is adopted;
---In terms of Normative References, this Standard makes specific adjustments
with technical differences, so as to adapt to the technical conditions of China.
The condition of the adjustments is intensively reflected in Chapter 2
“Normative References”. See the specific adjustments below.
GB/T 7306.1-2000 and GB/T 7306.2-2000, which equivalently adopt
international standard, are used to replace ISO 7-1.1994 (see 6.3.1.3);
GB/T 12222-2005, which modifies and adopts international standard, is
used to replace ISO 5210.2001 (see 5.3.2);
GB/T 27726-2011, which modifies and adopts international standard, is
used to replace ISO 9393-2.2005 (see 6.4);
Appendix A of GB/T 28494-2012, which modifies and adopts international
standard, is used to replace EN 12570.2000 (see 5.4.2);
Appendix B of GB/T 28494-2012, which modifies and adopts international
standard, is used to replace ISO 8233.1998 (see 7.8);
Appendix C of GB/T 28494-2012, which modifies and adopts international
standard, is used to replace ISO 8659.1999 (see 7.9);
ISO 228-1.2000, ISO 898-1.1999, ISO/TR 10358.1993, ISO 12092.2000,
ISO 12162.1995, EN 558-1.1995, EN 558-2.1995, EN 736-1.1995, EN
736-2.1997, EN 736-3.1999, EN 1092-1.2001, EN 1267.1997, EN 1759-
1.2004, EN 12107.1997 and EN 12266-1.2003, which are not quoted in the
Standard, are deleted;
The reference of GB/T 2828.1-2012 is added (see 8.3.2);
The reference GB/T 2918-2018 is added (see 7.1);
The reference of GB/T 8806-2008 is added (see 7.3);
The reference of GB/T 17219 is added (see 6.11);
The reference of GB/T 19278-2018 is added (see Chapter 3);
The reference of GB/T 21300-2007 is added (see 7.10);
The reference of GB/T 30832-2014 is added (see 7.6);
---The requirements for shell materials “PPO/PPE, PPSU and PA” are added (see
4.1);
---The requirements of 4.1.2 b) in ISO 16139.2006 are modified. in accordance
with the definitions of terms in GB/T 19278-2018, the dimensional requirements
for clearway valve, full bore valve and reduced bore valve are provided (see
6.3.2);
---The number of cycles of fatigue strength of gate valves with dn < 63 mm is raised
from 5,000 times to 15,000 times; the number of cycles of fatigue strength of
gate valves dn ≥ 63 mm is 5,000 times, which is consistent with that in ISO
16139.2006 (see 6.9).
This Standard makes the following editorial modifications.
---The title of this Standard is modified into Gate Valves of Thermoplastics
Materials;
---The specifications and dimensions are expressed in nominal outer diameter dn
(see Chapter 1);
---This Standard incorporates the amendments of ISO 16139.2006 / FD Amd I and
modifies the derating factor fr. The clauses involved in these amendments have
been marked by a vertical double line () on the outer margin (see Table 1 of
4.3.2).
Please be noted that certain content of this document might involve patents. The
institution issuing this document does not undertake the responsibility of identifying
these patents.
This Standard was proposed by China National Light Industry Council.
This Standard shall be under the jurisdiction of National Technical Committee 48 on
Plastic Products of Standardization Administration of China (SAC/TC 48).
The main drafting organizations of this Standard. Shanghai Sanshang Xinbang
Technology Co., Ltd.; Beijing Building Materials Testing Academy Co., Ltd. (National
Water-saving Appliance Product Quality Supervision and Inspection Center); Yonggao
Co., Ltd.; Zhejiang Zhongcai Pipes Technology Co., Ltd.; NAM SOK Building Material
& Plastic Products (Shenzhen) Co., Ltd.; Cangzhou Mingzhu Plastics Co., Ltd.;
Shanghai White Butterfly Pipe Technology Co., Ltd.; China Lesso Group Holdings
Limited; Baolu Seven Star Pipe Industry Co., Ltd.; Shanghai Tianli Industry (Group)
Co., Ltd.; Zhejiang Xinda Plastic Pipe Co., Ltd.
The main drafters of this Standard. Zhu Liping, Li Yanjun, Huang Jian, Wang Baiti, Wu
Chuhua, Chi Yongsheng, Chai Gang, Li Tongyi, Xu Hongyue, Ruan Chengfu, Cheng
Linke, Zhang Xuehua.
Gate Valves of Thermoplastics Materials
1 Scope
This Standard specifies the terms, definitions and symbols, materials, design,
requirements, test methods, inspection rules, markings, packaging, transportation and
storage of gate valves of thermoplastics materials (hereinafter referred to as gate
valves).
2 Normative References
The following documents are indispensable to the application of this document. In
terms of references with a specified date, only versions with a specified date are
applicable to this document. In terms of references without a specified date, the latest
version (including all the modifications) is applicable to this document.
GB/T 2828.1-2012 Sampling Procedures for Inspection by Attribute - Part 1.Sampling
Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection (ISO
2859-1.1999, IDT)
3 Terms, Definitions and Symbols
What is defined in GB/T 19278-2018, and the following terms and definitions are
applicable to this document.
4 Materials
The selection of materials for other various components, such as. sealing element,
stem and wedge, shall ensure that the performance of the gate valve complies with the
requirements specified in Chapter 6.These materials shall not adversely affect the
performance of the gate valve.
5 Design
The wall thickness of pressure-bearing components, such as. shell and wedge, may
be calculated with reference to GB/T 150.3-2011, and shall be greater than the wall
thickness of pipes of the same material, the same pipe series and the same
specifications, and satisfy the requirements of 6.4, 6.5 and 6.9.
6 Requirements
The manufacturer shall provide the nominal value of the flow coefficient and flow
resistance coefficient of the gate valve. The actually measured value of the flow
coefficient cannot be less than 90% of the provided value; the actually measured value
of the flow resistance coefficient cannot be greater than 110% of the provided value.
The light transmittance of gate valve shall be ≤ 0.2%.
7 Test Methods
In accordance with GB/T 8806-2008, conduct the measurement. The minimum flow
area shall be calculated in accordance with the measured dimensions.
In accordance with Appendix C in GB/T 28494-2012, conduct the cyclic test of fatigue
strength of gate valve opening and closing, and shall comply with the following
requirements.
8 Inspection Rules
In accordance with the stipulations of Table 6, group the gate valves by size.
9 Markings, Packaging, Transportation and Storage
Under general circumstances, each packaging box shall contain gate valves of the
same variety and specifications. Under other circumstances, it may be negotiated by
the demand-side and the supply-side.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 38008-2019 be delivered?Answer: The full copy PDF of English version of GB/T 38008-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 38008-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38008-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 38008-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 38008-2019?A step-by-step guide to download PDF of GB/T 38008-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 38008-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|