|
US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 37977.48-2023: Electrostatics - Part 4-8: Standard test methods for specific applications - Electrostatic discharge shielding bags
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 37977.48-2023 | English | 194 |
Add to Cart
|
3 days [Need to translate]
|
Electrostatics - Part 4-8: Standard test methods for specific applications - Electrostatic discharge shielding bags
| Valid |
GB/T 37977.48-2023
|
PDF similar to GB/T 37977.48-2023
Basic data | Standard ID | GB/T 37977.48-2023 (GB/T37977.48-2023) | | Description (Translated English) | Electrostatics - Part 4-8: Standard test methods for specific applications - Electrostatic discharge shielding bags | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L06 | | Classification of International Standard | 17.220.20 | | Word Count Estimation | 10,193 | | Date of Issue | 2023-08-06 | | Date of Implementation | 2024-03-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 37977.48-2023: Electrostatics - Part 4-8: Standard test methods for specific applications - Electrostatic discharge shielding bags
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 17.220.20
CCSL06
National Standards of People's Republic of China
Electrostatics Part 4-8.Specific Applications
Standard Test Methods for Electrostatic Discharge Shielding Bags
Published on 2023-08-06
2024-03-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
PrefaceⅠ
Introduction II
1 Scope 1
2 Normative reference documents 1
3 Terms and Definitions 1
4 Required equipment1
4.1 ESD Simulator 1
4.2 Waveform verification equipment 2
4.2.1 Overview 2
4.2.2 Oscilloscope 2
4.2.3 Current probe 2
4.2.4 High voltage resistor 2
4.3 Capacitive probe 2
4.4 Discharge electrode and ground electrode 2
4.5 Shielding bag size 2
4.6 Computer/Software2
4.7 Environmental Room 2
5 ESD simulator waveform verification step 3
6 System verification step 3
7 Test steps and conditions 3
8 Report 4
Appendix A (Informative) Energy Calculation Program 7
Figure 1 ESD Simulator 4
Figure 2 Parallel plate capacitance probe 5
Figure 3 Current waveform across 500Ω resistor 6
Foreword
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is Part 4-8 of GB/T 37977 "Electrostatics". GB/T 37977 has released the following parts.
---Part 2-1.Test methods Materials and products electrostatic charge dissipation ability;
---Part 2-3.Test methods for resistance and resistivity of antistatic solid planar materials;
---Part 3-2.Simulation method of electrostatic effects and electrostatic discharge test waveform of machine model (MM);
---Part 4-8.Standard test methods for electrostatic discharge shielding bags in specific applications;
---Part 5-1.General requirements for electrostatic protection of electronic devices.
This document is equivalent to IEC 61340-4-8.2014 "Electrostatics Part 4-8.Standard test methods for electrostatic discharge in specific applications."
Electrical shielding bag".
Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.
This document is proposed and administered by the Ministry of Industry and Information Technology of the People's Republic of China.
This document was drafted by. China Electronics Technology Standardization Institute, Shenzhen Great Wall Development Technology Co., Ltd., Anfang Hi-Tech Electromagnetic Safety
All Technology (Beijing) Co., Ltd., Shenzhen Zhongming Technology Co., Ltd., Foshan Shunde Tepuco Industrial Co., Ltd., Beijing Oriental
Measurement and Testing Institute, China Electronic Instrument Industry Association, Shanghai Maritime University, Information Industry Anti-static Product Quality Supervision and Inspection Center.
The main drafters of this document. Sha Changtao, Cai Lihua, Luo Chengwu, Lu Zhiheng, Han Lingling, He Xianpei, Li Zhipeng, Gao Zhiliang, Sun Yanlin,
Sun Keping, Song Jingnan.
Introduction
The GB/T 37977 series of standards are basic standards for electrostatics. They all adopt the IEC 61340 series of international standards to define electrostatic effects.
Simulation methods, anti-static parameter testing methods for anti-static materials and products, standard test methods in specific applications, electrostatic protection of electronic devices
Protect etc. The GB/T 37977 series of standards is planned to consist of 11 parts, consistent with the structure of the IEC 61340 series of standards.
---Part 2-1.Test methods for electrostatic charge dissipation capabilities of materials and products. The purpose is to specify test methods for testing insulation
and the static charge dissipation capabilities of static dissipative materials and products.
---Part 2-3.Test methods for resistance and resistivity of antistatic solid planar materials. The purpose is to specify test methods for measuring
Test the resistance and resistivity of the anti-static solid planar material. The applicable range of the measured resistance is 104Ω~1012Ω.
---Part 3-1.Simulation method of electrostatic effects and electrostatic discharge test waveform of human body model (HBM). The purpose is to specify
Basic requirements for electrostatic discharge current waveforms used to simulate HBM and the equipment used to generate and verify these waveforms.
---Part 3-2.Simulation method of electrostatic effects and electrostatic discharge test waveform of machine model (MM). The purpose is to specify
Basic requirements for simulating electrostatic discharge current waveforms of MM and the equipment used to generate and verify these waveforms.
---Part 4-1.Standard test methods Resistance of floor coverings and assembled floors in specific applications. The purpose is to specify the test
This test method is used to test the resistance of floor coverings and assembled floors, including ground resistance, point-to-point resistance and vertical resistance. It is
The applicable range of resistance measurement is 104Ω~1013Ω.
---Part 4-3.Standard test methods for footwear in specific applications. The purpose is to specify test methods for testing anti-static shoes
The resistance.
---Part 4-5.Standard test methods for characterization of electrostatic protection characteristics of human/shoe/ground systems in specific applications. The purpose is
It is a prescribed test method for evaluating the anti-static performance of the person/shoe/ground system.
---Part 4-6.Standard test methods for wristbands in specific applications. The purpose is to clarify the electrical and mechanical performance requirements of the wristband.
requirements, and experimental methods for testing these properties.
---Part 4-8.Standard test methods for electrostatic discharge shielding bags in specific applications. The purpose is to provide evaluation of electrostatic discharge screens
Test method for bag performance.
---Part 4-9.Standard test methods for clothing in specific applications. The purpose is to specify test methods for testing anti-static clothing
installed resistor.
---Part 5-1.General requirements for electrostatic protection of electronic devices. The purpose is to establish anti-static management and technical requirements to avoid or
Reduce damage to electronic products due to electrostatic discharge.
This document is part 4-8 and provides the field of electrostatic testing with a reproducible and general method for testing and determining the performance of electrostatic discharge shielding bags.
Electrostatic discharge shielding capability.
This test method describes the use of a single current
The probe measures the induced energy value in the shielding bag.
This document proposes the following important factors that influence test results.
---Discharge waveform characteristics;
---The capacitance value of the capacitive probe;
---Shielding bag size.
Electrostatics Part 4-8.Specific Applications
Standard Test Methods for Electrostatic Discharge Shielding Bags
1 Scope
This document describes the test methods and test device settings for evaluating the performance of electrostatic discharge shielding bags in accordance with the requirements of IEC 61340-5-3
The voltage is DC 1000V.
This test method is also applicable to other flexible packaging except shielding bags.
The purpose of this document is to ensure that testing laboratories obtain similar results when testing a given packaging material.
This document does not apply to electromagnetic interference (EMI), radio frequency interference (RFI), electromagnetic pulse (EMP) or volatile substance shielding protection.
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document.
IEC 61340-3-1 Electrostatics Part 3-1.Simulation method of electrostatic effects Electrostatic discharge test wave of human body model (HBM)
IEC 61340-5-3 Electrostatics Part 5-3.Electrostatic protection of electronic devices Characteristics and requirements for packaging of electrostatic discharge sensitive devices
vices)
IEC 62631-3-2 Dielectric and resistive properties of solid insulating materials Part 3-2.Resistive properties (DC method) Surface resistance and
Note. IEC 62631-3-1 and IEC 62631-3-2 have replaced IEC 60093.This document refers to IEC 62631-3-2.
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Limit the passage of coupling current caused by electrostatic discharge, or attenuate and block the electromagnetic field generated by electrostatic discharge.
4 Equipment required
4.1 ESD simulator
The equivalent circuit of the simulator consists of a capacitor with a capacitance of 100pF and a resistor with a resistance of 1500Ω in series.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 37977.48-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 37977.48-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 37977.48-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 37977.48-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|