GB/T 37178-2018_English: PDF (GB/T37178-2018)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 37178-2018 | English | 110 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Coal-based synthetic natural gas for vehicle
| Valid |
GB/T 37178-2018
|
Standard ID | GB/T 37178-2018 (GB/T37178-2018) | Description (Translated English) | Coal-based synthetic natural gas for vehicle | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | G16 | Classification of International Standard | 71.080.01 | Word Count Estimation | 6,685 | Date of Issue | 2018-12-28 | Date of Implementation | 2019-07-01 | Drafting Organization | Liupanshui New Blue Sky Technology Co., Ltd., Inner Mongolia Autonomous Region Petrochemical Supervision and Inspection Institute, Southwest Chemical Research and Design Institute Co., Ltd., Guizhou University, China National Offshore Oil and Gas Group Co., Ltd., Xinjiang Qinghua Energy Group Co., Ltd., PetroChina Southwest Oil and Gas Field Branch Natural Gas Research Institute, Shenyang University of Chemical Technology, Institute of Process Engineering, Chinese Academy of Sciences, Xinjiang Uygur Autonomous Region Product Quality Supervision and Inspection Institute, Liupanshui Municipal Quality and Technical Supervision Bureau, Shanxi Guoxin Energy Development Group Co., Ltd., Liupanshui Municipal Science and Technology Bureau | Administrative Organization | National Coal Chemical Standardization Technical Committee | Proposing organization | China Petroleum and Chemical Industry Federation |
GB/T 37178-2018
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 71.080.01
G 16
Coal-based Synthetic Natural Gas for Vehicle
ISSUED ON: DECEMBER 28, 2018
IMPLEMENTED ON: JULY 01, 2019
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 5
4 Technical Requirements ... 5
5 Test method ... 6
6 Sampling and test rules ... 6
7 Storage and use ... 7
References ... 8
Coal-based synthetic natural gas for vehicle
1 Scope
This Standard specifies the terms and definitions, technical requirements, test
methods, sampling and test rules, storage and use of coal-based synthetic
natural gas for vehicle.
This Standard is applicable to coal-based synthetic natural gas whose pressure
is not more than 25 MPa and which is used as fuel for vehicles, including
hydrogen-rich gas which is separated from synthetic natural gas, and excluding
natural gas for vehicle which uses natural gas as raw material.
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For
undated references, the latest edition (including all amendments) applies to this
document.
GB/T 13609, Natural gas sampling guidelines
GB/T 17258, Steel cylinders for the on-board storage of compressed natural
gas as a fuel for automotive vehicles
GB/T 17283, Determination of the water dew point of natural gas. Cooled
surface condensation hygrometers
GB/T 19158, Steel cylinders for the storage of compressed natural gas
GB/T 27893, Natural gas. Determination of particles content. Gravimetric
method
GB/T 33318, Gas analysis. Determination of sulfide. Gas chromatography
with sulfur chemiluminescence
GB/T 33445, Coal-based synthetic natural gas
TSGR 0004, Supervision Regulation on Safety Technology for Stationary
Pressure Vessel
5 Test method
5.1 Determination of methane, hydrogen, oxygen, carbon monoxide, carbon
dioxide and ammonia components in coal-based synthetic natural gas shall be
carried out in accordance with GB/T 33445. Other equivalent methods may be
used to determine methane, hydrogen, oxygen, carbon monoxide, carbon
dioxide and ammonia components in coal-based synthetic natural gas for
vehicle, and the arbitration test method is GB/T 33445.
5.2 Determination of total sulfur content in coal-based synthetic natural gas
shall be carried out in accordance with GB/T 33318. Other equivalent methods
may be used to determine the total sulfur content in coal-based synthetic natural
gas for vehicle, and the arbitration test method is GB/T 33318.
5.3 Determination of water dew point of coal-based synthetic natural gas shall
be carried out in accordance with GB/T 17283. Other equivalent methods may
be used to determine the water dew point of coal-based synthetic natural gas
for vehicle, and the arbitration test method is GB/T 17283.
5.4 Determination of the total content of solid particles in coal-based synthetic
natural gas for vehicle shall be carried out in accordance with GB/T 27893.
Other equivalent methods may be used to determine the total content of solid
particles in coal-based synthetic natural gas for vehicle; and when the
measurement result is objectionable, the arbitration test method is GB/T 27893.
The test is carried out after decompression by a decompression device that has
no filter.
6 Sampling and test rules
6.1 Sampling
The sampling of coal-based synthetic natural gas for vehicle shall be carried
out according to GB/T 13609; the influence of hydrogen embrittlement shall be
fully considered, and the sampling container shall be carefully selected.
6.2 Test rules
6.2.1 All items in Table 1 of Chapter 4 are delivery test items.
6.2.2 Under the following circumstances, coal-based synthetic natural gas
products shall be thoroughly tested in accordance with the technical
requirements in this Standard:
-- When it is first put into production;
-- In normal production, after regular or cumulative production;
......
|