Chinese Standards Shop Partner of Google-Books Database: 169759 (Nov 10, 2019)
 HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

GB/T 36102-2018

Chinese Standard: 'GB/T 36102-2018'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
GB/T 36102-2018English95 Add to Cart 0--15 minutes. Auto immediate delivery. Tin-coated copper-clad steel wire for electronic products Valid GB/T 36102-2018
GB/T 36102-2018Chinese18 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]  

 GB/T 36102-2018 -- Click to view a PDF In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email by our cloud-server.  
Detail Information of GB/T 36102-2018; GB/T36102-2018
Description (Translated English): Tin-coated copper-clad steel wire for electronic products
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K11
Classification of International Standard: 29.060.10
Word Count Estimation: 10,147
Date of Issue: 2018-03-15
Date of Implementation: 2018-10-01
Drafting Organization: Datongfa Composite Cable Technology Development Co., Ltd., China Electronic Technology Standardization Institute, Shenzhen Tongfa Bimetal Material Co., Ltd., Shenzhen Jinxinnuo High-tech Co., Ltd., China Electronics Technology Group Corporation 23rd Research Institute, Shenzhen Skyworth RGB Electronics Co., Ltd., Nantong HSBC Electronic Technology Co., Ltd.
Administrative Organization: National Standardization Technical Committee for High Frequency Cables and Connectors for Electronic Equipment (SAC/TC 190)
Proposing organization: Ministry of Industry and Information Technology of the People's Republic of China
Issuing agency(ies): The General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the National Standardization Administration of China

GB/T 36102-2018
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.060.10
K 11
Tin-coated copper-clad steel
wire for electronic products
电子产品用镀锡铜包钢线
ISSUED ON. MARCH 15, 2018
IMPLEMENTED ON. OCTOBER 1, 2018
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the PRC;
Standardization Administration of the PRC.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative references ... 4 
3 Classification and type ... 5 
4 Requirements ... 5 
5 Test methods ... 8 
6 Inspection rules ... 10 
7 Packaging, product marking, transport, and storage ... 11 
8 Content of order contract ... 12 
Tin-coated copper-clad steel
wire for electronic products
1 Scope
This Standard specifies the classification and type, requirements, test methods,
inspection rules, packaging, product marking, transport, and storage, etc. of tin-
coated copper-clad steel wire for electronic products.
This Standard applies to the tin-coated copper-clad steel wire for electronic
products which takes copper-clad steel wire as base wire.
2 Normative references
The following documents are indispensable for the application of this document.
For the dated references, only the versions with the dates indicated are
applicable to this document. For the undated references, the latest version
(including all the amendments) are applicable to this document.
GB/T 728-2010 Ingot tin
GB/T 2423.32-2008 Environmental testing for electric and electronic
products - Part 2. Test methods - Test Ta. Solderability test by the wetting
balance method
GB/T 3048.2-2007 Test methods for electrical properties of electric cables
and wires - Part 2. Test of electrical resistivity of metallic materials
GB/T 4909.2-2009 Test methods for bare wires - Part 2. Measurement of
dimensions
GB/T 4909.3-2009 Test methods for bare wires - Part 3. Tensile test
GB/T 4909.5-2009 Test methods for bare wires - Part 5. Bend test - Reverse
bend test
GB/T 4909.9-2009 Test methods for bare wires - Part 9. Test for continuity of
coating - Sodium polysulfide solution method
GB/T 4909.11-2009 Test methods for bare wires - Part 11. Test for adherence
of coating
GB/T 6462-2005 Metallic and oxide coatings - Measurement of coating
is less than the specified value and the breaking point appears within 25 mm
from the chuck of tester or the gauge length of extensometer, the data is invalid;
and the test shall be repeated.
5.5 Reverse bend
The number of reverse bend of tin-coated copper-clad steel wire shall be tested
in accordance with the provisions of GB/T 4909.5-2009.
5.6 Coating thickness
The coating thickness of tin-coated copper-clad steel wire shall be measured in
accordance with the provisions of GB/T 6462-2005. Other measuring methods
agreed upon by both supply and demand sides can also be used.
5.7 Continuity of coating
The continuity of coating of tin-coated copper-clad steel wire shall be tested in
accordance with the provisions of Procedure a) in 5.5 of GB/T 4909.9-2009.
The test piece shall be subjected to two immersion cycles.
5.8 Adherence of coating
The adherence of coating of tin-coated copper-clad steel wire shall be tested in
accordance with the provisions of GB/T 4909.11-2009. The test piece shall be
wound on a test rod which does not exceed 4 times the nominal diameter of the
wire. The test piece after being wound is subjected to one-cycle immersion test.
5.9 Solderability
The normal solderability of tin-coated copper-clad steel wire shall be tested in
accordance with the provisions of GB/T 2423.32-2008 and the following
detailed rules.
a) Test piece preparation. On each coil (shaft) of sample drawn in the
specified number, CUT off 2 test pieces with a length of about 30 mm. The
test piece shall not be touched by hand or contaminated, and before the
test, shall not be cleaned.
b) Test conditions. The solder is Sn96.5Ag3.0Cu0.5. The soldering flux is
prepared with 25% of rosin and 75% of ethyl alcohol. The test temperature
is (245±3)°C.
c) Test parameters. The immersing depth is 3 mm. The immersing speed is
20 mm/s. The immersing duration is 5 s.
d) Test result. On the automatically-recorded wetting curve, TAKE the
than 3 coils (shafts). When the batch is large, it shall not be more than 10 coils
(shafts). The test piece shall be cut off from each sample unit (coil or shaft).
6.4 Determination rules
If all inspections are qualified, the inspection batch shall be qualified. When
there is an unqualified item, it shall take double the number of samples for the
second inspection of the unqualified item; if there is still nonconformity, the
batch of products shall be judged as unqualified.
7 Packaging, product marking, transport, and storage
7.1 Packaging
Tin-coated copper-clad steel wire shall be evenly and neatly wound around the
wire coil (shaft). The wire end shall be firmly fixed. Proper distance shall be
maintained between the outermost wire turn and the edge of side plate of wire
coil.
Each coil (shaft) of wire shall be wrapped with Kraft paper and then packaged
in a plastic bag containing desiccant, and then loaded into a barrel (box) lined
with moisture-proof paper.
7.2 Product marking
Each coil (sha......
Related standard:   GB/T 36279-2018  GB/T 36551-2018
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2019