GB/T 35980-2018 PDF English
US$90.00 · In stock · Download in 9 secondsGB/T 35980-2018: Remanufacturing engineering design of mechanical products - Guideline Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 35980-2018 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Remanufacturing engineering design of mechanical products - Guideline
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 35980-2018
GB/T 35980-2018: Remanufacturing engineering design of mechanical products - Guideline---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT35980-2018
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 01.040.25
J 01
Remanufacturing engineering design
of mechanical products - Guideline
Issued on: FEBRUARY 6, 2018
Implemented on: SEPTEMBER 1, 2018
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
Introduction ... 4
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 Basic principles ... 6
5 Working procedures and contents ... 8
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard was proposed by and shall be under the jurisdiction of National
Technical Committee 337 on Green Manufacturing Technology of Standardization
Administration of China (SAC/TC 337).
The drafting organizations of this Standard. Key Laboratory of Defense Technology for
Equipment Remanufacturing Technology, Beijing Ruiman Technology Co., Ltd., Hefei
University of Technology, China Productivity Center for Machinery, Hebei Jing-Jin-Ji
Institute of Remanufacturing Industry Technology, Testing Technical Center for
Industrial Products and Raw Materials of Shanghai Entry-Exit Inspection and
Quarantine Bureau, Sinotruk Jinan Fuqiang Power Co., Ltd., China National Institute
of Standardization, National Remanufacturing Engineering Research Center of
Mechanical Products, Shanghai Lingang Remanufacturing Industrial Development Co.,
Ltd., Beijing Shield Engineering Association, Beijing Zhongzhi Resources Recycling
Technology Co., Ltd., Shandong Energy Heavy Equipment Manufacturing Group Co.,
Ltd., Guangzhou Huadu Quanqiu Automatic Transmission Co., Ltd.
The main drafters of this Standard. Zhang Wei, Yao Junkun, Liu Bohai, Xu Binshi, Shi
Peijing, Li Enzhong, Yu Helong, Zhou Xinyuan, Zheng Handong, Xi Daoyun, Wu Yiwen,
Sang Fan, Liu Huan, Sun Tingting, Wang Wenyu, Zhu Sheng, Wang Yong, Wang
Xiuteng, Hu Zhenfeng, Li Kai, Chen Yongxiong, Tian Futai, Cheng Bayi, Ruan Xia,
Wang Zhongbo, Wang Yajun, Huang Zhiyong.
Remanufacturing engineering design
of mechanical products - Guideline
1 Scope
This Standard specifies the terms, scope, basic principles, working procedures and
contents of remanufacturing engineering design of mechanical products.
This Standard applies to the comprehensive design of the remanufacturing
engineering system (including product recycling, production process, management
plan, marketing services, etc.) of mechanical products and/or parts; this Standard can
be referred to for the remanufacturing engineering design of electromechanical
products.
NOTE. The object of the remanufacturing engineering design of mechanical products is the
whole process of the remanufacturing of mechanical products, including qualitative design and
quantitative design.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to this document.
GB/T 28619, Remanufacturing – Terminology
3 Terms and definitions
For the purposes of this document, the following terms and definitions and those given
in GB/T 28619 apply.
3.1
remanufacturing engineering design of mechanical products
The process in which an overall planning is provided for all remanufacturing links,
technical units and resource utilization including the recycling of waste mechanical
the remanufacturing of waste mechanical products to achieve the best benefits, taking
into consideration the comprehensive costs of the remanufacturing of mechanical
products, including design, production, transportation and storage, and the
comprehensive costs generated by the remanufacturing production of mechanical
products, the environmental pollution caused by economic activities, etc.
4.2.4 The environmental protection design of the remanufacturing of mechanical
products requires that the environmental influences caused by the remanufacturing
processing of waste products and the use of remanufactured products are less than
the environmental influences caused by the production and use of prototype new
products.
4.2.5 The resources design of the remanufacturing of mechanical products requires
the utilization of the resources of waste products and recyclable resources as much as
possible.
4.3 Abidance-by-laws-and-regulations principle
The remanufacturing engineering design of mechanical products shall be carried out
within the framework of laws, regulations and standards, such as.
a) the restrictive requirements and obligations as specified in international laws and
regulations;
b) the requirements of national policies, laws, regulations and compulsory
standards;
c) technical standards and voluntary agreements;
d) other relevant requirements.
4.4 Stakeholder-requirements principle
Stakeholder requirements shall be taken into consideration for the remanufacturing
engineering design of mechanical products, such as.
a) the right requirements of stakeholders for original products and remanufactured
products;
b) the demands, development tendencies and expectations of the market and
consumers;
c) the expectations of the society and investors, etc.;
d) other relevant requirements.
The remanufacturing production process is mainly to optimize, design and establish
the remanufacturing production modes and technological standards and provide the
remanufacturing production plans which are executable, in accordance with the
remanufacturing quality requirements. It mainly includes.
-- dismantling process. the contents include the design and determination of
dismantling process, dismantling procedures, dismantling tools and sites;
-- cleaning process. the contents include the design and determination of cleaning
positions, cleaning technological process, cleaning quality standards, cleaning
equipment and sites;
-- detection process. the contents include the design and determination of detection
positions, detection technological process, detection quality standards, detection
equipment and sites;
-- machining process. the contents include the design and determination of
machining faces, machining technical standards, processing equipment and sites;
-- surface technological process. the contents include the design and determination
of part positions, technological process, technical standards, equipment, materials
and sites for the surface technical restoration or performance upgrading;
-- assembling process. the contents include the design and determination of
assembling process, assembling standards, assembling equipment and sites of
remanufactured products;
-- coating process. the contents include the design and determination of coating
positions, coating process, coating standards, coating equipment, materials and
sites of remanufactured products;
-- plant layout. the contents and plans includes the design and determination of
remanufacturing plant layouts, equipment layouts, working station layouts and
production line layouts.
5.2.3 Remanufacturing management plan design
Planning shall be made as a whole and remanufacturing management plans shall be
designed and established in accordance with the quality requirements of
remanufactured products and the characteristics of remanufacturing production
process, mainly including.
-- quality management. the design and determination of the quality management
standards, etc. of different remanufacturing processes and products;
-- production management. the design and determination of management contents,
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 35980-2018 be delivered?Answer: The full copy PDF of English version of GB/T 35980-2018 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 35980-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 35980-2018_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 35980-2018 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 35980-2018?A step-by-step guide to download PDF of GB/T 35980-2018_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 35980-2018".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|