Powered by Google-Search & Google-Books Chinese Standards Shop Database: 169759 (Nov 17, 2019)
 HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

GB/T 35790.1-2017

Chinese Standard: 'GB/T 35790.1-2017'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
GB/T 35790.1-2017English160 Add to Cart 0--15 minutes. Auto immediate delivery. Specification for installation of the electronic identification of motor vehicles--Part 1: Automobile Valid GB/T 35790.1-2017
GB/T 35790.1-2017Chinese15 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]

 GB/T 35790.1-2017 -- Click to view the ACTUAL PDF of this standard (Auto-delivered in 0~10 minutes) In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.  
Detail Information of GB/T 35790.1-2017; GB/T35790.1-2017
Description (Translated English): Specification for installation of the electronic identification of motor vehicles--Part 1: Automobile
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: T35
Classification of International Standard: 35.240.15
Word Count Estimation: 10,171
Date of Issue: 2017-12-29
Date of Implementation: 2018-07-01
Drafting Organization: Ministry of Public Security Traffic Management Science Institute
Administrative Organization: Ministry of Public Security
Regulation (derived from): National Standards Bulletin 2017 No. 32
Proposing organization: Ministry of Public Security of the People's Republic of China
Issuing agency(ies): People's Republic of China General Administration of Quality Supervision, Inspection and Quarantine, China National Standardization Administration

GB/T 35790.1-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 35.240.15
T 35
Specification for installation of the electronic
identification of motor vehicles -- Part 1. Automobile
机动车电子标识安装规范
第 1部分. 汽车
ISSUED ON. DECEMBER 29, 2017
IMPLEMENTED ON. JULY 1, 2018
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword . 3 
1 Scope .. 4 
2 Normative references . 4 
3 Terms and definitions . 4 
4 Requirements . 4 
4.1 Installation mode.. 4 
4.2 Installation position . 5 
4.3 Installation conditions . 5 
4.4 Installation steps .. 5 
4.5 Pasting requirements . 6 
Annex A (Normative) Schematic diagrams for the installation positions .. 7 
Specification for installation of the electronic
identification of motor vehicles -- Part 1. Automobile
1 Scope
This Part of GB/T 35790 specifies the installation mode, installation position,
installation conditions, installation steps and pasting requirements of the
electronic identification of motor vehicles on the automobiles.
This Part is applicable to the installation and acceptance of the electronic
identification of motor vehicles on the front windshield of automobiles.
2 Normative references
The following documents are essential to the application of this document. For
dated references, only the editions with the dates indicated are applicable to
this document. For undated references, only the latest editions (including all the
amendments) are applicable to this document.
GB/T 35789.1-2017 General specification for the electronic identification of
motor vehicles -- Part 1. Automobile
QB/T 4086 Glass cleaner
3 Terms and definitions
The terms and definitions defined in GB/T 35789.1-2017 and the following ones
are applicable to this document.
3.1 Aperture for radiowave
The area without any films and metallic materials on the front windshield of an
automobile, which is used for wireless signal transmission.
4 Requirements
4.1 Installation mode
The electronic identification of motor vehicles shall be front facing the front of
motor vehicles, and be attached to the inside of the front windshield of
automobiles by means of an adhesive.
4.2 Installation position
The requirements for the installation position of the electronic identification of
motor vehicles are as follows.
a) In case of equipped with the aperture for radiowave, the installation position
is shown in Annex A, A.1. In case of no aperture for radiowave, it should be
installed in the horizontal center and upper vertical position on the front
windshield of vehicles. The installation position of different models shall be
adjusted according to the actual situation, in order to obtain the best reading
performance. For the installation position, SEE Annex A, A.2.
b) After the installation of the electronic identification of motor vehicles, the
distance between the outer edge and the film and the metallic material shall
not be less than 10mm.
c) The installation position shall not interfere with the driver’s vision and not
distract the driver.
4.3 Installation conditions
The installation conditions for the electronic identification of motor vehicles shall
meet the following requirements.
a) The front windshield shall be clean and dry;
b) There shall be no metallic materials in the front windshield at the installation
position, and there shall be no films on the surface;
c) When the installation ambient temperature is lower than 10°C, the
electronic identification of motor vehicles and the front windshield shall be
preheated before pasting.
4.4 Installation steps
The steps for installing the electronic identification of motor vehicles are as
follows.
a) For the front windshield with the film at the installation position, REMOVE
the film at the installation position;
b) USE a detergent that meets the requirements of QB/T 4086 to clean the
installation position on the front windshield, so as to ensure......
Related standard:   GB/T 35785-2017  GB/T 35786-2017
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2019