GB/T 34598-2017 (GBT 34598-2017)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
GB/T 34598-2017	English	85	Add to Cart	0--9 seconds. Auto-delivery	Plug-in hybrid electric commercial vehicles -- Specifications	GB/T 34598-2017	Valid	GB/T 34598-2017

GB/T 34598-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.080.01
T 47
Plug-in hybrid electric commercial vehicles -
Specifications
ISSUED ON. OCTOBER 14, 2017
IMPLEMENTED ON. MAY 1, 2018
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3 
1 Scope .. 4 
2 Normative references ... 4 
3 Terms and definitions ... 5 
4 Requirements and test methods .. 5 
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard was proposed by the Ministry of Industry and Information Technology of
the People’s Republic of China.
This Standard shall be under the jurisdiction of the National Technical Committee of
Auto Standardization (SAC/TC 114).
The drafting organizations of this Standard. Hunan CRRC Times Electric Vehicle Co.,
Ltd., China Automotive Technology and Research Center, Anhui Ankai Automobile Co.,
Ltd., Zhengzhou Yutong Bus Co., Ltd., Beiqi Foton Motor Co., Ltd., Suzhou King Long
United Automobile Industry (Suzhou) Co., Ltd., Xiamen Golden Dragon Bus Co., Ltd.,
Tianjin BYD Auto Co., Ltd.
The main drafters of this Standard. Liu Ling, He Yuntang, Wang Kunjun, Lan Hao, Zhao
Baoying, Wang Wei, Yi Maoming, Ding Chuanji, Gao Jianping, Cheng Xiang, Wei
Changhe, Ning Shuqi, Fang Yuanhua, Kang Yanyu, Lin Bisheng.
Plug-in hybrid electric commercial vehicles -
Specifications
1 Scope
This Standard specifies the terms and definitions, requirements and test methods of
plug-in hybrid electric commercial vehicles.
This Standard applies to plug-in hybrid electric commercial vehicles (hereinafter
referred to as “vehicles”).
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to This Standard.
GB 1589, Limits of dimensions, axle load and masses for motor vehicles, trailers
and combination vehicles
GB 7258, Technical specifications for safety of power-driven vehicles operating on
roads
GB 14762, Limits and measurement methods for exhaust pollutants from gasoline
engines of heavy-duty vehicles (III, IV)
GB 17691, Limits and measurement methods for exhaust pollutants from
compression ignition and gas fuelled positive ignition engines of vehicles (III, IV, V)
GB 18352, Limits and measurement methods for emissions from light-duty vehicles
GB/T 18384 (all parts), Electrically propelled road vehicles - Safety specifications
GB/T 18386, Electric vehicles - Energy consumption and range - Test procedures
GB/T 19596, Terminology of electric vehicles
GB/T 19750-2005, Hybrid electric vehicles - Engineering approval evaluation
program
GB/T 19753, Test methods for energy consumption of light-duty hybrid electric
vehicles
GB/T 19754, Test methods for energy consumption of heavy-duty hybrid electric