|
US$119.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33403-2016: Determination of self-levelling properties of adhesive
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 33403-2016 | English | 119 |
Add to Cart
|
2 days [Need to translate]
|
Determination of self-levelling properties of adhesive
| Valid |
GB/T 33403-2016
|
PDF similar to GB/T 33403-2016
Basic data | Standard ID | GB/T 33403-2016 (GB/T33403-2016) | | Description (Translated English) | Determination of self-levelling properties of adhesive | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G38 | | Classification of International Standard | 83.180 | | Word Count Estimation | 6,651 | | Date of Issue | 2016-12-30 | | Date of Implementation | 2017-07-01 | | Regulation (derived from) | National Standard Notice No.27 of 2016 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 33403-2016: Determination of self-levelling properties of adhesive---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Determination of self-levelling properties of adhesive
ICS 83.180
G38
National Standards of People's Republic of China
Test method for self - leveling performance of adhesives
Determination ofself-levelingpropertiesofadhesive
2016-12-30 release
2017-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed by the China Petroleum and Chemical Industry Association.
This standard is under the jurisdiction of the National Adhesive Standardization Technical Committee (SAC/TC185).
The drafting of this standard. Shanghai Rubber Products Research Institute Co., Ltd., Shanghai Kangda Chemical New Materials Co., Ltd., Beijing Tianshan new
Material Technology Co., Ltd., Chengdu Tuli Chemical Industry Co., Ltd., Friends of the three (Tianjin) Polymer Technology Co.,
The main drafters of this standard. Zhang Jianqing, Hu Hongmei, Chen Yaju, Shen Yan, Zheng Linli, Shi Zhenpeng, Wang Yanfang.
Test method for self - leveling performance of adhesives
1 Scope
This standard specifies the test method for the determination of self-leveling properties of adhesives.
This standard applies to the determination of self-leveling properties of adhesives.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 2943 Adhesive Terminology
3 terms and definitions
GB/T 2943 and the following terms and definitions apply to this document.
3.1
Self-leveling self-levelingproperty
Without any external pressure conditions, the adhesive at the specified temperature, after a specified time after the stability of the plastic surface.
4 equipment and materials
4.1 250mL capacity of the polyethylene mixer.
4.2 Horizontal molds. The mold consists of a bottom-level, closed-end recess, the inner dimensions of the groove. width (20 ± 1) mm, depth (25
± 1) mm, length (300 ± 1) mm, the groove material should be 1mm ~ 2mm thick aluminum, steel or plastic. see picture 1.
The unit is in millimeters
Figure 1 Horizontal mold
4.3 inclined mold. the mold from the bottom of the groove and the horizontal direction (2.5 ± 0.1)% tilt, the bottom of the horizontal ends of the closed groove, concave
The length of the groove is width (20 ± 1) mm, depth (25 ± 1) mm, length (300 ± 1) mm, groove material should be 1mm ~ 2mm thick
Of aluminum, steel or plastic. See Figure 2.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33403-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 33403-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 33403-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33403-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|