Powered by Google www.ChineseStandard.net Database: 189760 (20 Apr 2024)

GB/T 33368-2016 (GBT33368-2016)

GB/T 33368-2016_English: PDF (GBT 33368-2016, GBT33368-2016)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 33368-2016English150 Add to Cart 0--9 seconds. Auto-delivery Aluminum alloy strips for television Valid GB/T 33368-2016

BASIC DATA
Standard ID GB/T 33368-2016 (GB/T33368-2016)
Description (Translated English) Aluminum alloy strips for television
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard H61
Classification of International Standard 77.150.10
Word Count Estimation 10,195
Date of Issue 2016-12-30
Date of Implementation 2017-11-01
Drafting Organization Southwest Aluminum (Group) Co., Ltd., Nonferrous Metals Technology and Economic Research Institute
Administrative Organization National Standard Committee on Nonferrous Metals (SAC/TC 243)
Regulation (derived from) National Standard Notice No.27 of 2016
Proposing organization China Nonferrous Metals Industry Association
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, China National Standardization Administration Committee

Standards related to: GB/T 33368-2016

GB/T 33368-2016
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.150.10
H 61
Aluminum Alloy Strips for Television
ISSUED ON: DECEMBER 30, 2016
IMPLEMENTED ON: NOVEMBER 1, 2017
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative References ... 4 
3 Requirements ... 5 
4 Test Methods ... 8 
5 Inspection Rules ... 9 
6 Marking, Packaging, Transportation, Storage and Quality Certificate ... 11 
7 Order Sheet (or contract) Content ... 12 
Aluminum Alloy Strips for Television
1 Scope
This Standard stipulates the requirements, test methods, inspection rules, marking,
packaging, transportation, storage, quality certificate and order sheet (or contract)
content of aluminum alloy strips for television.
This Standard is mainly applicable to aluminum alloy strips (hereinafter referred to as
strips) for displayer, circuit board support and heat dissipation of LCD and LED flat
panel TV.
2 Normative References
The following documents are indispensable to the application of this document. In
terms of references with a specific date, only versions with the specific date are
applicable to this document. In terms of references without a specific date, the latest
versions (including all the modification orders) are applicable to this document.
GB/T 232 Metallic Materials - Bend Test
GB/T 3190 Wrought Aluminum and Aluminum Alloy - Chemical Composition
GB/T 3199 Wrought Aluminum and Aluminum Alloy Products - Packing, Marking,
Transporting and Storing
GB/T 3880.3 Wrought Aluminum and Aluminum Alloy Plates, Sheets and Strips for
General Engineering - Part 3: Tolerances on Forms and Dimensions
GB/T 7999 Optical Emission Spectrometric Analysis Method of Aluminum and
Aluminum Alloys
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and Judgement
of Limiting Values
GB/T 16865 Test Pieces and Method for Tensile Test for Wrought Aluminum and
Magnesium Alloys Products
GB/T 17432 Methods for Sampling for Analyzing the Chemical Composition of
Wrought Aluminum and Aluminum Alloys
GB/T 20975 Methods for Chemical Analysis of Aluminum and Aluminum Alloys
4 Test Methods
4.1 Chemical Composition
4.1.1 The analytical method of chemical composition shall comply with the stipulations
in GB/T 20975 or GB/T 7999. The arbitration analysis method shall adopt the method
stipulated in GB/T 20975.
4.1.2 “A1” content shall be calculated in accordance with the method stipulated in GB/T
3190. In the calculation of “A1” content, take the sum of the analytical value of
conventional analytical elements and unconventional analytical elements, which are
suspected to be excessive, as “the sum of element content”.
4.1.3 The determination of analytical value shall adopt rounding-off comparison
method. The rounding-off rules of numerical value shall comply with relevant
stipulations in GB/T 8170. The rounding-off numerical digit shall be consistent with the
limit digit stipulated in GB/T 3190.
4.2 Dimensional Deviation
4.2.1 Dimensional rounding-off
Rounding-off of measured dimensions is not allowed. The determination method of
limit value shall comply with the stipulations in GB/T 8170.
4.2.2 Unevenness
Randomly take a sample (length: 2,000 mm) from strips (the sample shall try to include
the wavy part of the strips). Freely place the sample on a platform. In accordance with
the stipulations in GB/T 3880.3, detect wave height and number of waves.
4.2.3 Others
Other dimensional deviations shall be measured through measuring instruments of
corresponding accuracy, or, receive visual inspection.
4.3 Tensile Mechanical Property at Room Temperature
Room-temperature tensile test shall be conducted in accordance with the method
stipulated in GB/T 16865.
4.4 Bending Performance
Room-temperature bending performance shall be conducted in accordance with the
method stipulated in GB/T 232.
4.5 Appearance Quality
shall be determined as unqualified.
6 Marking, Packaging, Transportation, Storage and
Quality Certificate
6.1 Marking
6.1.1 Product marking
Each coil of strips which are qualified in the inspection shall have an attached label,
which includes the following content:
a) Product name;
b) Nameplate;
c) Status;
d) Dimensions;
e) Batch No. or coil No. of strips;
f) Net weight;
g) Inspection stamp of the supply-side’s quality inspection department (or quality
inspector’s signature or stamp)
6.1.2 Marking of packing box
The marking of strips’ packing box shall comply with the stipulations in GB/T 3199.
6.2 Packaging, Transportation and Storage
Packaging, transportation and storage of strips shall comply with the stipulations in
GB/T 3199. When the demand-side has special requirements towards the packaging
mode of strips, the demand-side and the supply-side shall determine them through
negotiation; this content shall be indicated in the order sheet (or contract).
6.3 Quality Certificate
Each coil of strips shall have an attached product quality certificate, which indicates:
a) The supply-side’s name;
b) Product name;
c) Nameplate and status;
...