|
US$119.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33322-2016: Rubber plasticizer -- Aromatic base mineral oil
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 33322-2016 | English | 119 |
Add to Cart
|
2 days [Need to translate]
|
Rubber plasticizer -- Aromatic base mineral oil
| Valid |
GB/T 33322-2016
|
PDF similar to GB/T 33322-2016
Basic data | Standard ID | GB/T 33322-2016 (GB/T33322-2016) | | Description (Translated English) | Rubber plasticizer -- Aromatic base mineral oil | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G71 | | Classification of International Standard | 83.040.20 | | Word Count Estimation | 6,680 | | Date of Issue | 2016-12-13 | | Date of Implementation | 2017-07-01 | | Regulation (derived from) | National Standard Notice No.277 of 2016 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 33322-2016: Rubber plasticizer -- Aromatic base mineral oil---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rubber plasticizer - Aromatic base mineral oil
ICS 83.040.20
G71
National Standards of People's Republic of China
Rubber plasticizer Aromatic mineral oil
2016-12-13 released
2017-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
China National Standardization Management Committee released
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some of the contents of this document may involve patents. The release of this document
The Agency does not assume responsibility for identifying these patents.
This standard is proposed by the China Petroleum and Chemical Industry Association.
This standard by the National Rubber and Rubber Products Standardization Technical Committee Chemical Assistant Sub-Technical Committee (SAC/TC35/SC12)
Go back.
The drafting unit of this standard. PetroChina Karamay Petrochemical Co., Ltd., CNOOC oil and gas development and utilization company, China National Petroleum Corporation
Co., Ltd. Liaohe Petrochemical Company, Petrochemical Research Institute, Suzhou Jiutai Group Co., Ltd., Guangzhou Dagang Petroleum Technology Co., Ltd.
the company.
The main drafters of this standard. Yang Jianxiang, Fan Xiuli, Zhou Xiuzhen, Lv Zhen, Huang Shaozhong, Yin Hong, Fu Yu'e.
Rubber plasticizer Aromatic mineral oil
1 Scope
This standard specifies the labeling, technical requirements, inspection rules and packaging, marking, storage, transportation and transportation of rubbery plasticizers for aromatic mineral oils.
Acceptance of goods.
This standard applies to natural oil produced by the aromatic mineral oil-based rubber plasticizer.
The products of this standard are suitable for rubber-butadiene rubber (SBR), butadiene rubber (BR), isoprene rubber (IR) and other rubber
Into the oil filling, as well as rubber tire processing plasticized, softened oil.
If the product of this standard belongs to the above range, it is recommended that the user first use the selective test before use.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, the only dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Petroleum products - Determination of moisture content GB/T
Petroleum products and hydrocarbon solvents - Determination of aniline point and mixed aniline point GB/T
Measurement of kinematic viscosity of petroleum products and calculation of dynamic viscosity GB/T
Petroleum and petroleum products and additives - Determination of mechanical impurities GB/T 511
GB/T 1884 Determination of density of crude oil and liquid petroleum products - Laboratory method (density meter method)
GB/T 1885 Oil Meter
GB/T 3535 Determination of pour point of petroleum products
GB/T 3536 Determination of flash point and ignition of petroleum products Cleveland open cup method
Petroleum liquid manual sampling method GB/T
GB/T 4945 Determination of acid and alkali values for petroleum products and lubricants (color indicator method)
Petroleum products - Determination of color
GB/T 17040 Petroleum and petroleum products - Determination of sulfur content - Energy dispersive X - ray fluorescence spectroscopy
Test Method for Viscosity Constant of Petroleum Fractions (VGC) for NB/SH/T 0835
NB/SH/T 0838 Determination of fused aromatic hydrocarbons (PCA) in unused lubricating base oils and asphaltene petroleum fractions
Dimethyl Sulfoxide Extraction Refractive Index Method
Rules for the Acceptance, Storage, Delivery and Delivery of Petroleum Products
SH/T 0689 Determination of total sulfur content of light hydrocarbons and engine fuels and other oils (UV fluorescence)
Determination of Refractive Index and Refractive Dispersion of Liquid Hydrocarbons SH/T 0724
Method for calculating carbon type of oil - based insulating oil SH/T 0725
SH/T 0729 Carbon distribution and structural family composition calculation of petroleum fractions (ndM method)
Determination of polycyclic aromatic hydrocarbons in mineral oil
3 mark
3.1 The product (except A2530) is marked as. Product Type Carbon Type Analysis Minimum 100 ° C Movement Viscosity Center Value
product name
Example. A
Indicating that the products belonging to this standard are aromatic mineral oil type rubber plasticizer. "A" is "Aromatic" English Aromatic
Base the first letter of base.
Indicating that the carbon value of CA is not less than 7%.
09 rubber plasticizer aromatic mineral oil
Indicates a center value of kinematic viscosity at 100 ° C of 9 mm2/s.
3.2 The product of this standard A2530 Marking. Product Type Carbon Type Analysis Minimum 100 ℃ Kinematic Viscosity Minimum Product Name
Example. A
Indicating that the products belonging to this standard are aromatic mineral oil type rubber plasticizer. "A" is "Aromatic" English Aromatic
Base the first letter of base.
Indicating that the carbon value of CA is not less than 25%.
30 rubber plasticizer aromatic mineral oil
Indicates that the minimum kinematic viscosity at 100 ° C is 30 mm2/s.
4 technical requirements
Rubber plasticizer Aromatic mineral oil technical requirements and test methods should be consistent with the provisions of Table 1.
Table 1 rubber plasticizer aromatic mineral oil technical requirements and test methods
project
index
A0709 A1004 A1020 A1220 A1426 A1820 A2530
experiment method
(1) Density (20 ℃) / (kg/m3) Report Report Report Report
GB/T 1884
GB/T 1885
(2) kinematic viscosity/(mm2/s)
40 ° C
100 ° C
report
7 ~ 11
report
3 ~ 5
report
16 ~ 26
report
16 ~ 26
report
22 ~ 30
report
16 ~ 26
report
≥30
GB/T 265
(3) Flash point/° C ≥ 190 165 210 210 210 220 230 GB/T 3536
(4) Pour point/℃ ≤ 15 -10a 15 15 15 20 20 GB/T 3535
(5) aniline point/° C ≤ 90 85 99 95 95 85 75 GB/T 262
(6) Chroma/number ≤ 1.5 0.5 - - - - - GB/T 6540
(7) Acid value (in KOH)/(mg/g) ≤ 0.5 0.5 Reporting report Report report GB/T 4945
(8) Refractive index n20D report report report report SH/T 0724
(9) Viscosity constant (VGC) Report with report of this report NB/SH/T 0835
(10) sulfur content b/(mg/kg)
Sulfur content (mass fraction) b /%
Report Report Report Report
SH/T 0689
GB/T 17040
(11) Mechanical impurities (mass fraction) /% None None None None None None None GB/T 511
(12) Moisture (volume fraction) /% Traces Traces Traces Traces Traces Traces GB/T 260
(13) Fused aromatic hydrocarbon (PCA) content /% < 3 3 3 3 3 3 3 NB/SH/T 0838
Table 1 (continued)
project
index
A0709 A1004 A1020 A1220 A1426 A1820 A2530
experiment method
(14) Carbon type analysis c /%
CA ≥
CN
CP
report
report
report
report
report
report
report
report
report
report
report
report
report
report
SH/T 0725
SH/T 0729
(15) sum of eight polycyclic aromatic hydrocarbons (PAHs)
(Mg/kg) ≤
Of which. 1) benzo (a) pyrene ≤
2) benzo (e) pyrene
3) benzo (a) anthracene
4)
5) benzo (b) fluoranthene
6) benzo (j) fluoranthene
7) benzo (k) fluoranthene
8) dibenzo (a, h) anthracene
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
report
SN/T 1877.3-
First method
A The user agrees that the indicator may be negotiated by both parties.
B According to the actual sulfur content of oil selected one of the detection method can be.
C In the event of controversy, the hydrorefining products are SH/T 0729 as the arbitration method; the non-hydrorefining products are SH/T 0725 as the arbitration method.
5 inspection rules
5.1 Classification of tests
5.1.1 Factory inspection
5.1.1.1 Factory inspection items. (1) to (14) in Table 1 are factory inspection items.
5.1.1.2 Factory cycle inspection items. The sum of the eight polycyclic aromatic hydrocarbons (PAHs) in paragraph (15) of Table 1 and their sub-items are the factory cycle test
project. The inspection period is 6 months.
5.1.2 Type inspection
The type inspection items are all the inspection items specified in Table 1.
The type test is carried out in the following cases.
A) changes in the nature of crude oil, processing conditions change and maintenance after the start of the situation;
B) the factory inspection results and the previous type of test results are quite different.
5.2 Group Batch Rules
The standard products in the raw materials, the same process conditions, the production of a product for each batch of a can.
5.3 Sampling
The sampling of the products belonging to this standard shall be carried out according to GB/T 4756, and the sampling volume shall be 2L for inspection and retention.
5.4 Qualified judgment
When the test results of the products belonging to this standard are in accordance with the requirements of Table 1, it is determined that the products are qualified. If the test results of the batch
There is an indicator does not meet the requirements of Table 1, according to the provisions of GB/T 4756 re-take double samples for re-examination, there is still a re-examination results
Indicators do not meet the requirements of Table 1, then determine the batch of products failed.
6 Packaging, marking, storage, transportation and delivery acceptance
The packaging, marking, storage, transportation and delivery acceptance of the products belonging to this standard shall be carried out according to SH0164.
6102-
T /
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33322-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 33322-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 33322-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33322-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|