HOME
Cart(0)
Quotation
About-Us
Tax
PDFs
Standard-List
Powered by Google
www.ChineseStandard.net
Database: 189759 (12 Jan 2025)
GB/T 33217-2016 English PDF
GB/T 33217-2016_English: PDF (GB/T33217-2016)
Standard ID
Contents [version]
USD
STEP2
[PDF] delivered in
Standard Title (Description)
Status
PDF
GB/T 33217-2016
English
110
Add to Cart
0--9 seconds. Auto-delivery
Burr height for stampings
Valid
GB/T 33217-2016
BASIC DATA
Standard ID
GB/T 33217-2016 (GB/T33217-2016)
Description (Translated English)
Burr height for stampings
Sector / Industry
National Standard (Recommended)
Classification of Chinese Standard
J32
Classification of International Standard
25.010
Word Count Estimation
6,656
Date of Issue
2016-12-13
Date of Implementation
2017-07-01
Drafting Organization
Shanghai Jiaotong University, Dongguan City, China and Thailand Mold Co., Ltd., Beijing Institute of Electrical and Mechanical
Administrative Organization
National Standardization Technical Committee for Forging (SAC/TC 74)
Regulation (derived from)
National Standard Announcement No.157 of 2016
Proposing organization
National Standardization Technical Committee for Forging (SAC/TC 74)
Issuing agency(ies)
General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, China National Standardization Administration Committee
GB/T 33217-2016 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 25.010 J 32 Burr height for stampings ISSUED ON: DECEMBER 13, 2016 IMPLEMENTED ON: JULY 01, 2017 Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People’s Republic of China. Table of Contents Foreword ... 3 1 Scope ... 4 2 Terms and definitions ... 4 3 Limit value of the burr height ... 4 4 Detection ... 5 Burr height for stampings 1 Scope This Standard specifies the limit value and detection of the burr height for stampings. This Standard applies to metal stampings that have certain requirements for burr height. 2 Terms and definitions The following terms and definitions are applicable to this document. 2.1 Burr of stamping The burr that is left on the section of the stamping when the sheet is cut or blanked, which is shown in Figure 1. Notes: h -- burr height; b -- material thickness of the stamping. Figure 1 -- Section of the stamping 3 Limit value of the burr height The limit value of the burr height for stampings is in accordance with the regulations in Table 1.
......
Similar standards:
GB/T 33211-2016
GB/T 33212-2016
Similar PDFs (Auto-delivered in 9 seconds):
GB/T 33217-2016
GB/T 33216-2016
GB/T 33220-2016
GB/T 33212-2016