|
US$119.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 33018.3-2016: Energy-saving technical specification for carbon enterprise -- Part 3: Machining
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 33018.3-2016 | English | 119 |
Add to Cart
|
2 days [Need to translate]
|
Energy-saving technical specification for carbon enterprise -- Part 3: Machining
| Valid |
GB/T 33018.3-2016
|
PDF similar to GB/T 33018.3-2016
Basic data | Standard ID | GB/T 33018.3-2016 (GB/T33018.3-2016) | | Description (Translated English) | Energy-saving technical specification for carbon enterprise -- Part 3: Machining | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H04 | | Classification of International Standard | 77.140.99 | | Word Count Estimation | 6,629 | | Date of Issue | 2016-10-13 | | Date of Implementation | 2017-05-01 | | Regulation (derived from) | National Standard Notice No.1716 of 2016 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 33018.3-2016: Energy-saving technical specification for carbon enterprise -- Part 3: Machining---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Energy-saving technical specification for carbon enterprise - Part 3. Machining
ICS 77.140.99
H04
National Standards of People's Republic of China
Energy - saving technical specification for carbon enterprises
Part 3. Machining
Part 3. Machining
2016-10-13 released
2017-05-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is proposed by China Iron and Steel Industry Association.
This standard is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183).
The drafting of this standard. Henan Branch Feng Carbon Materials Co., Ltd., China Southern Handan Wu Peng Lining New Materials Co., Ltd., Metallurgical Industry letter
Interest standard institute.
The main drafters of this standard. Feng Jianguo, Zhou Feng, Qiu Jinhui, Chen Qianwan, Chen Wen, Wan Shengli, Wu Yuanying, Wang Jiangwei, Zheng Jingxu.
Energy - saving technical specification for carbon enterprises
Part 3. Machining
1 Scope
This standard specifies the carbon energy processing technology requirements, process equipment, testing and control systems, safety and environmental protection, installation and commissioning,
Operation and maintenance requirements.
This standard applies to the carbon enterprise mechanical processing.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
General rules for the preparation and management of energy - carrying units
Energy Saving Technology
3.1 Mechanical processing energy saving technical requirements
Mechanical processing procedures Energy-saving technical control requirements in accordance with Table 1 requirements.
Table 1 Technical requirements
Name control requirements
Fan power consumption fan frequency control, to achieve automatic control
Powder, pellet recovery rate of not less than 99%
Equipment idling rate of not more than 15%
Tool use according to different products, the use of appropriate tools to improve equipment utilization
Working current overload current does not exceed 20%
The main component temperature of the equipment does not exceed the design requirements
Hydraulic system within a workpiece processing cycle, the pressure fluctuations of not more than 2%
3.2 Energy saving measures
3.2.1 using automatic processing control device, energy saving.
3.2.2 continuous boot cycle to achieve the most reasonable requirements, improve processing efficiency.
3.2.3 encourage enterprises to adopt advanced technology, the allocation of advanced energy-saving equipment.
3.2.4 in the processing size range, as far as possible to improve the yield.
3.2.5 for different varieties of products to be reasonable with the processing parameters, to make full use of efficiency.
3.3 energy management
3.3.1 enterprises should be in accordance with the requirements of GB 17167 configuration of energy measurement equipment, improve the energy measurement management system.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 33018.3-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 33018.3-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 33018.3-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 33018.3-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|