HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (26 Oct 2025)

GB/T 32515-2016 English PDF

US$559.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32515-2016: Variable-frequency drive for injection molding machine
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 32515-2016English559 Add to Cart 5 days [Need to translate] Variable-frequency drive for injection molding machine Valid GB/T 32515-2016

PDF similar to GB/T 32515-2016


Standard similar to GB/T 32515-2016

GB/T 39572.1   GB/T 37404   GB/T 31487.3   GB/T 32516   GB/T 32505   

Basic data

Standard ID GB/T 32515-2016 (GB/T32515-2016)
Description (Translated English) Variable-frequency drive for injection molding machine
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K46
Classification of International Standard 29.240.99
Word Count Estimation 28,270
Date of Issue 2016-02-24
Date of Implementation 2016-09-01
Quoted Standard GB/T 2900.1-2008; GB/T 2900.33-2004; GB/T 2900.83-2008; GB/T 3797; GB 4208-2008; GB/T 4798.2-2008; GB/T 4798.3-2007; GB 12668.3-2012; GB 12668.501-2013; GB/T 13384-2008; GB/T 17626.2-2006; GB/T 17626.3-2006; GB/T 17626.4-2008; GB/T 17626.5-2008; GB/T 17626.6-2008
Regulation (derived from) National Standard Announcement No. 5 of 2016
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 32515-2016: Variable-frequency drive for injection molding machine

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Variable-frequency drive for injection molding machine ICS 29.240.99 K46 National Standards of People's Republic of China Injection molding machine frequency control device Issued on. 2016-02-24 2016-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

CONTENTS

Introduction Ⅲ ... 1 Scope 1 ... 2 Normative references 1 ... 3 Terms and definitions ... 4 Category 4 ... 5 Rating 4 ... 5.1 input side Rating 4 ... 5.2 Output Rating 5 ... 6 Conditions 5 ... 6.1 Environmental conditions 5 ... 6.2 Electrical conditions 6 ... 7 Technical requirements 7 ... 7.1 7 ... appearance and mechanical properties 7.2 Functional requirements 8 ... 7.3 Safety Requirements 8 ... 7.4 rated output capacity 12 ... 7.5 light load operation 12 ... 7.6 operating frequency range of technical performance 12 ... 7.7 Efficiency 13 ... 7.8 The total input power factor 13 ... 7.9 Output voltage unbalance 13 ... 7.10 Protection 13 ... 7.11 temperature 14 ... 7.12 Noise 14 ... 7.13 environmental adaptability 14 ... 7.14 Electromagnetic compatibility 14 ... 7.15 braking capacity 14 ... 7.16 Built-in pressure regulator 15 ... 8 Test 15 ... 8.1 General requirements 15 ... 8.2 Type tests 15 ... 8.3 factory test 15 ... Special test 8.4 15 ... 8.5 Test Project 15 ... 8.6 General inspection 16 ... 8.7 Insulation System Test 16 ... 8.8 clearances and creepage distances 16 ... 8.9 grounding continuity protection 16 ... 8.10 rated output capacity 17 ... 8.11 light-load running test 17 ... Technical performance within the operating frequency range of 8.12 17 ... 8.13 Efficiency measuring 18 ... 8.14 input power factor measurement 18 ... 8.15 temperature rise test 18 ... 8.16 Noise Measurement 18 ... Frequency resolution 8.17 18 ... 8.18 output voltage unbalance measuring 18 ... 8.19 overload test 18 ... 8.20 Protection 18 ... 8.21 18 ... environmental adaptability test 8.22 Electromagnetic compatibility test 18 ... 8.23 Protection class test 19 ... 8.24 to discharge the capacitor 19 ... 9 signs, packaging, transportation and storage 19 ... 9.1 mark 19 ... 9.2 Packaging 19 ... 9.3 Transport 19 ... 9.4 Storage 19 ... Appendix A (normative) electromagnetic compatibility requirements 21 ...

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Electrical Equipment Industrial Association. This standard by the national frequency control equipment Standardization Technical Committee (SAC/TC518) centralized. This standard was drafted. Tianjin Institute of Electric Co., Ltd., Haileinuoer Technology Co., Ltd., Shanghai STEP Electric Co., Ltd., hope Senlan Technology Co., Ltd. Zhejiang Fu Ling Electric Co., Ltd., Tianjin-day electronic control distribution Limited, Zhejiang Province, mechanical and electrical products quality inspection by the Shenzhen Wang Wo Electric Co., the state-controlled electricity distribution equipment Quality Supervision and Inspection Center. The main drafters of this standard. Chuzi Lin, Chen three leopard, Ye Qing, Du Junming, Zhongzhi Bing, Zhang, Wang Jianfeng, wood green, Zhan cloud, Ruan Jianguo, Zhao Dawei, Zhang Jing, Pu day. Injection molding machine frequency control device

1 Scope

The standard provides for plastic injection molding special inverter device classification, conditions of use, technical requirements, test items and signs, packaging, transportation and storage. This standard applies to the rated input voltage of AC 1kV and below grade, rated input frequency of 50Hz or 60Hz, the output voltage is less than 1kV, the output frequency is less than 600Hz injection molding machine frequency control device (hereinafter referred to as "Speed ​​Device").

2 Normative references

The following documents for the application of this document is essential. For cited documents with dates, only the dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2900.1-2008 Electrical Basic terminology GB/T 2900.33-2004 Electrotechnical terminology - Power Electronics GB/T 2900.83-2008 Electrotechnical terminology of electrical and magnetic devices GB/T 3797 Electric Control Equipment GB 4208-2008 shell protection (IP code) GB/T 4798.2-2008 application of electric and electronic products environmental conditions - Part 2. Transport GB/T 4798.3-2007 application of electric and electronic products environmental conditions - Part 3. Stationary use at weather protected locations GB 12668.3-2012 speed electric drive systems - Part 3. EMC requirements and specific test methods GB/T 12668.501-2013 speed electric drive systems - Part 5-1. Safety requirements for electrical, thermal and energy GB/T 13384-2008 mechanical and electrical products packaging General technical conditions GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques RFEMS test GB/T 17626.4-2008 Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient burst immunity test GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test GB/T 17626.6-2008 Electromagnetic compatibility - Testing and measurement techniques Immunity to conducted disturbances induced field GB/T 17627.1-1998 part of high-voltage test techniques for low voltage equipment. Definitions and testing requirements GB/Z 18039.5-2003 electromagnetic compatibility environment in public power supply system frequency conducted disturbances and signaling in the electromagnetic environment GB 23712-2009 Industry machinery electrical equipment, machine tools EMC emission limits GB/T 30844.2-2014 1kV and the following general frequency control equipment - Part 2. Test methods IEC 61000-2-4.2002 Electromagnetic compatibility (EMC) - Part 2-4. Environmental plant frequency conducted disturbances compatibility level

3 Terms and Definitions

GB/T 2900.1-2008, GB/T 2900.33-2004, GB/T 2900.83-2008 defined and the following terms and definitions apply to this document.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32515-2016_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32515-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32515-2016_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32515-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Refund Policy     Privacy Policy     Terms of Service     Shipping Policy     Contact Information