|
US$379.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32488-2016: Ductile iron pipes and fittings -- Seal coats for cement mortar linings
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 32488-2016 | English | 379 |
Add to Cart
|
4 days [Need to translate]
|
Ductile iron pipes and fittings -- Seal coats for cement mortar linings
| Valid |
GB/T 32488-2016
|
PDF similar to GB/T 32488-2016
Basic data | Standard ID | GB/T 32488-2016 (GB/T32488-2016) | | Description (Translated English) | Ductile iron pipes and fittings -- Seal coats for cement mortar linings | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H48 | | Classification of International Standard | 77.140.75; 23.040.10 | | Word Count Estimation | 19,139 | | Date of Issue | 2016-02-24 | | Date of Implementation | 2017-01-01 | | Regulation (derived from) | National Standard Announcement No | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 32488-2016: Ductile iron pipes and fittings -- Seal coats for cement mortar linings---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Ductile iron pipes and fittings - Seal coats for cement mortar linings
ICS 77.140.75; 23.040.10
H48
National Standards of People's Republic of China
Ductile iron pipes and fittings
Cement mortar lining seal coating
(ISO 16132..2004, MOD)
2016-02-24 released
2017-01-01 Implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Management Committee released
Directory
Preface I
1 Scope 1
2 normative reference document 1
3 Terms and definitions 1
4 technical requirements 2
5 type test requirements 3
6 Test Method 3
7 logo 3
Appendix A (informative) This standard is defined in accordance with ISO 16132..2004
Appendix B (informative) The corresponding technical differences between ISO and ISO 16132..2004 and its causes 5
Appendix C (normative) Use the test membrane to measure the thickness of the seal coat
Appendix D (normative appendix) Adhesion test 9
Appendix E (normative) Short-term sealing performance 10
Appendix F (normative) long-term sealing performance 11
Appendix G (normative) Water pressure cycle test
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the re-drafting method to modify ISO 16132..2004 "ductile iron pipe and pipe cement mortar liner seal coating".
This standard has more structural changes compared to ISO 16132..2004, which is listed in Appendix A and ISO 16132..2004
Of the chapter number of the control list.
There are technical differences between this standard and ISO 16132..2004, and the terms involved in these differences have been passed through the margin
(│), and a list of the corresponding technical differences and their causes is given in Appendix B.
This standard has also made the following editorial changes.
--- "this standard" instead of "this international standard";
--- use the decimal point symbol "." Instead of the symbol ",";
- delete the catalog of international standards, preface and introduction.
This standard is proposed by China Iron and Steel Industry Association.
This standard is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183).
The drafting of this standard unit. the new Cast Iron Pipe Co., Ltd., Gaoping City, Kwong's Casting Co., Ltd., Metallurgical Industry Information Standards Institute.
The main drafters of this standard. Li Jun, Wang Xuezhu, Li Ning, Ye Weide, Ding Baohua, Hou Jie, Zhu Yongchang.
Ductile iron pipes and fittings
Cement mortar lining seal coating
1 Scope
This standard gives the requirements for coating a coating on ductile iron pipes and pipe cement mortar lining surfaces in a factory. Cement mortar
Lining is also lining in the factory.
This standard also gives a short-term sealing performance, long-term sealing performance, hydraulic cycle test type test requirements and daily tests such as appearance,
Thickness and adhesion requirements and test methods.
This standard applies to the supply of cement mortar lining seal coating ductile iron pipe and pipe fittings.
Note. The role of the seal coating is to reduce the cement mortar lining and water supply pipe in the water contact to limit the infiltration of inorganic materials into the water, while reducing the water resistance,
Improve water delivery capacity.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Standard Test Method for Drinking Water - Sensory and Physical
GB/T 10807-2006 Determination of hardness of soft foam polymer materials (pressure method) (ISO 2439..1997, IDT)
GB/T 13295 Ductile iron pipes and fittings for water and gas (GB/T 13295-2013, ISO 2531..2009, MOD)
GB/T 13452.2 Determination of paint film thickness and varnish (GB/T 13452.2-2008, ISO 2808..2007, IDT)
GB/T 17219 Safety evaluation criteria for drinking water distribution equipment and protective materials
GB/T 17457 Ductile iron pipes and fittings Cement mortar lined (GB/T 17457-2009, ISO 4179..2005, IDT)
ASTMD3330-02 Standard Test Method for Peel Strength of Pressure-Sensitive Tapes (StandardTestMethodforPeelAdhesionof
Pressure-SensitiveTape)
3 terms and definitions
The following terms and definitions apply to this document.
3.1
Ductile iron ductileiron
Cast iron for the manufacture of ductile iron pipes, fittings and accessories, most or all of the precipitated graphite is spherical.
3.2
Tube fitting
Different from the tube of the cast, the pipeline can be deflected, change the direction or caliber.
Note. Pan Cheng, disk inserted and sets also belong to the pipe.
3.3
Test film testfilm
Thickness and density of the same film. In the coating process of the seal coating, the substrate under the action of temperature stability, for the preparation of measurement of dense
A coating film for the thickness of the coating.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32488-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 32488-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 32488-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32488-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|