|
US$489.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32434-2015: Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 32434-2015 | English | 489 |
Add to Cart
|
4 days [Need to translate]
|
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
| Valid |
GB/T 32434-2015
|
PDF similar to GB/T 32434-2015
Basic data | Standard ID | GB/T 32434-2015 (GB/T32434-2015) | | Description (Translated English) | Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G33 | | Classification of International Standard | 83.140.30 | | Word Count Estimation | 23,226 | | Date of Issue | 2015-12-31 | | Date of Implementation | 2016-07-01 | | Quoted Standard | GB/T 6111; GB/T 13663; GB/T 13663.2; GB 15558.1; GB 15558.2; GB/T 19278-2003; GB/T 19810; GB/T 20674.1; CJJ 63-2008 | | Adopted Standard | ISO 21307-2011, MOD | | Regulation (derived from) | State Standard Announcement 2015 No.43 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the hot-melt docking procedures for polyethylene (PE) pipes and fittings for gas and water supply and distribution systems made of PE 80 and PE 100 blends, and general principles for quality control. The hot-melt docking procedure specified in this standard is applicable to polyethylene (PE) pipes and fittings with nominal outer diameter of 75 mm to 630 mm for gas and water supply systems; a single low-pressure hot-melt docking procedure is applicable to wall thicknesses of not more than 70 mm (PE) pipes and fittings for gas and water supply systems; dual low-pressure hot-melt docking program for polyethylene (PE) gas and feedwater delivery systems with wall thicknesses greater than 22 mm and not more than 70 mm; Pipe and pipe fittings of the hot-melt docking program. | GB/T 32434-2015: Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics pipes and fittings - Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
ICS 83.140.30
G33
National Standards of People's Republic of China
Plastic pipes and fittings for gas and water transport
Distribution system pipes made of polyethylene (PE) and
Pipe Butt Fusion program
(PE) pipesandfittingsusedintheconstructionofgasand
(ISO 21307.2011, MOD)
Issued on. 2015-12-31
2016-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard uses redrafted modification method using ISO 21307.2011 (E) "of plastic pipes and fittings for gas and water distribution systems
Polyethylene (PE) pipes and fittings for butt fusion program. "
This standard and ISO 21307.2011 (E) compared to the structure have more adjustment, listed in Appendix A of this standard and reg number
ISO 21307.2011 (E) List of control clauses numbered.
This standard and ISO 21307.2011 (E) the existence of technical differences compared to the terms of these differences has been involved through its outer margin empty
White vertical position singlet | were marked Appendix B gives a list of corresponding technical differences and the reasons ().
Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.
The standard proposed by China National Light Industry Council.
This standard by the National Plastics Standardization Technical Committee (SAC/TC48) centralized.
This standard was drafted. Hong Kong Hua Huixin plastic (Zhongshan) Co., Ltd., Asia Plastics Co., Ltd., Ningbo Yuhua Electric Appliances
Ltd., Xi'an Long plastic welding Equipment Co., Ltd., Shanghai White Butterfly Pipe Technology Co., Icahn Enterprise Group (Shanghai) Co., Ltd.
And Liansu Technology Industrial Limited.
The main drafters of this standard. Wen Yongsheng, Wang Zhiwei, Liwei Fu, Zhao Feng, Cai Gang, He Jianwen, Zhang Weifeng, Yao Shui-liang.
Plastic pipes and fittings for gas and water transport
Distribution system pipes made of polyethylene (PE) and
Pipe Butt Fusion program
1 Scope
This standard specifies the PE80 and PE100 polyethylene mixed ingredients manufactured in gas and water distribution systems using polyethylene (PE) pipe and
Butt the general principles of quality control procedures and fittings.
This standard butt fusion procedures apply to the nominal diameter 75mm ~ 630mm gas and water delivery system polyethylene
(PE) pipes and fittings; single low pressure Butt procedure applies to not more than 70mm wall thickness of the gas and water delivery systems Polyethylene
(PE) pipes and fittings for butt fusion program; dual low-voltage Butt procedure applies to wall thickness greater than 22mm and not more than 70mm of
Gas and water transportation systems - Polyethylene (PE) pipes and fittings for butt fusion program.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6111 Standard Test Method for conveying fluid pressure within the thermoplastic pipe (GB/T 6111-2003, ISO 1167.1996,
IDT)
GB/T 13663 for water supply polyethylene (PE) pipe (GB/T 13663-2000, neqISO 4427.1996)
GB/T 13663.2 water supply polyethylene (PE) piping systems - Part 2. Fittings
GB 15558.1 Buried polyethylene (PE) piping systems - Part 1. Pipes (GB 15558.1-2015, ISO 4437.
2014, MOD)
GB 15558.2 Buried polyethylene (PE) piping systems - Part 2. Fittings (GB 15558.2-2005, ISO 8085-2.
2001, ISO 8085-3.2001, MOD)
GB/T 19278-2003 Thermoplastics pipes, fittings and valves General terms and their definitions
GB/T 19810 Polyethylene (PE) pipes and fittings - Butt joint tensile strength and failure mode of measurement (GB/T
19810-2005, ISO 13953.2001, IDT)
GB/T 20674.1 plastic pipes and fittings - Equipment for fusion polyethylene systems - Part 1. Butt (GB/T 20674.1-
2006, ISO 12176-1.1998, MOD)
CJJ63-2008 polyethylene gas pipeline engineering technical regulations
3 Terms and Definitions
GB/T 19278-2003 define the following terms and definitions apply to this document.
3.1
Heating plate temperature heaterplatetemperature
And the pipe or fitting end surface of the heating plate surface temperature of the contact area.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 32434-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 32434-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 32434-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32434-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|