|
US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 31150-2014: Automotive parts logistics plastic returnable containers -- Size and technical parameters requirements
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 31150-2014 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Automotive parts logistics plastic returnable containers -- Size and technical parameters requirements
| Valid |
GB/T 31150-2014
|
PDF similar to GB/T 31150-2014
Basic data | Standard ID | GB/T 31150-2014 (GB/T31150-2014) | | Description (Translated English) | Automotive parts logistics plastic returnable containers -- Size and technical parameters requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A82 | | Classification of International Standard | 53.120; 55.160 | | Word Count Estimation | 11,167 | | Date of Issue | 9/3/2014 | | Date of Implementation | 12/1/2014 | | Quoted Standard | GB/T 5737; JB/T 5991 | | Regulation (derived from) | People's Republic of China Announcement of Newly Approved National Standards No. 21 of 2014 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Standard specifies requirements for automotive parts logistics plastic containers the size range and technical parameters. This Standard is applicable to injection molding production of plastic containers. | GB/T 31150-2014: Automotive parts logistics plastic returnable containers -- Size and technical parameters requirements
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Automotive parts logistics plastic returnable containers. Size and technical parameters requirements
ICS 53.120,55.160
A82
National Standards of People's Republic of China
Auto Parts Logistics
Plastic containers - Dimensions and technical requirements
Issued on. 2014-09-03
2014-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 plastic crates size series in claim 2
5 Plastic crates technical requirements 3
6 plastic containers performance test inspection requirements 4
7 plastic containers Identification 4
Appendix A (informative) plastic containers, pallets floorplan 5
Annex B (informative) plastic containers embedded in highly schematic 7
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
The standard of the National Logistics Standardization Technical Committee (SAC/TC269) and focal points.
This standard drafting units. China Federation of Logistics and Purchasing Automobile Logistics Branch, Guangzhou Fengshen Logistics Co., Ltd., set up logistics CHEP
Preparation of (China) Co., Ltd., Dongfeng Motor Co., Ltd., Shanghai Anji Automotive Parts Logistics Co., FAW Car Co., Ltd., God
Long Automobile Co., Ltd., Chongqing Chang'an Minsheng Logistics Limited.
The main drafters. Zhang opened the letter, Liu Zhan policy, Zhang Xiaoying, Ren Qi Cai, Jing Wei, Yang Yifu, in Xue-lin, YUAN Gang, Huang Bin, Zhou Xiao, Lu Wei,
Mengqing Wen, Mazeng Rong, left Xinyu.
Auto Parts Logistics
Plastic containers - Dimensions and technical requirements
1 Scope
This standard specifies the use of plastic automobile parts logistics turnover box Dimensions and technical parameters.
This standard applies to the injection molding production of plastic containers.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 5737 food plastic containers
JB/T 5991 digital equipment ergonomics general requirements
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Plastic crates plasticreturnablecontainer
Rigid plastics in the automotive parts logistics, in order to ensure the quality of parts, with standard pallet between different logistics station using turnover
Packaging container.
3.2
Stackable box stackablecontainer
After a one-time injection molding box. The bottom and the top of its box have mutually cooperating projections and recesses to achieve mutual Plastic crates
Stacking.
3.3
Folding boxes foldablecontainer
Formed by the bottom and rear walls are assembled, it can be folded upright or plastic containers.
NOTE. wherein the bottom walls connected by a hinge or similar structure.
3.4
Plastic crates side plasticcontainerwidthside
Plastic crates longitudinal direction of the vertical plane.
3.5
Plastic crates end face plasticcontainerlengthside
Plastic crates in the width direction of the vertical plane.
3.6
Plastic crates external dimensions plasticcontainerexternalsize
Plastic crates in length, width and height of the direction of maximum size.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 31150-2014_English be delivered?Answer: Upon your order, we will start to translate GB/T 31150-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 31150-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 31150-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|