GB/T 301-2015_English: PDF (GB/T301-2015)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 301-2015 | English | 130 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Rolling bearings -- Thrust ball bearings -- Boundary dimensions
| Valid |
GB/T 301-2015
|
| GB/T 301-1995 | English | 599 |
Add to Cart
|
4 days [Need to translate]
|
Rolling bearings. Thrust ball bearings. Boundary dimensions
| Obsolete |
GB/T 301-1995
|
| GB 301-1984 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Rolling bearings--Thrust ball bearings with flat back faces--Boundary dimensions
| Obsolete |
GB 301-1984
|
| Standard ID | GB/T 301-2015 (GB/T301-2015) | | Description (Translated English) | Rolling bearings -- Thrust ball bearings -- Boundary dimensions | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J11 | | Classification of International Standard | 21.100.20 | | Word Count Estimation | 15,139 | | Date of Issue | 2015-12-31 | | Date of Implementation | 2016-04-01 | | Older Standard (superseded by this standard) | GB/T 301-1995 | | Quoted Standard | GB/T 272; GB/T 273.2; GB/T 274; GB/T 6930; GB/T 7811; JB/T 2974 | | Drafting Organization | Harbin Bearing Group Corporation; Luoyang Bearing Research Institute Co., Ltd; Zhejiang Precision Machinery Co., Ltd. MATV | | Administrative Organization | Rolling the National Standardization Technical Committee (SAC/TC 98) | | Regulation (derived from) | State Standard Announcement 2015 No.43 | | Proposing organization | China Machinery Industry Federation | | Issuing agency(ies) | Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China | | Summary | This International Standard specifies the dimensions of unidirectional and bidirectional thrust ball bearings in accordance with GB/T 273.2. This standard applies to the bearing design and selection. | | Standard ID | GB/T 301-1995 (GB/T301-1995) | | Description (Translated English) | Rolling bearings. Thrust ball bearings. Boundary dimensions | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J11 | | Classification of International Standard | 21.100.10 | | Word Count Estimation | 15,120 | | Date of Issue | 1995/12/14 | | Date of Implementation | 1996/8/1 | | Older Standard (superseded by this standard) | GB 301-1984; JB 5305-1991 | | Adopted Standard | ISO 104-1979, NEQ | | Drafting Organization | Wafangdian Bearing Factory | | Administrative Organization | Rolling the National Standardization Technical Committee | | Proposing organization | Ministry of Machinery Industry of the People Republic of China | | Issuing agency(ies) | State Bureau of Technical Supervision | | Summary | This standard specifies the following thrust ball bearing dimensions. a) 11, 12, 13, 14 series thrust ball bearings (51000 type, Figure 1); b) 22, 23, 24 series of two-way thrust ball bearings (52000 type, Figure 2); c) 12, 13, 14 series of external heart Thrust Ball bearings (53000 type, Figure 3; 54000 U type, Figure 4); d) 22, 23, 24 series of bi-directional external heart Thrust Ball bearings (54000 type, Figure 5; 54000 U type 6). This standard applies to the thrust ball bearing design, manufacture and supply the user selection. | | Standard ID | GB 301-1984 (GB301-1984) | | Description (Translated English) | Rolling bearings--Thrust ball bearings with flat back faces--Boundary dimensions | | Sector / Industry | National Standard | | Classification of Chinese Standard | J11 | | Word Count Estimation | 10,122 | | Date of Issue | 1984/3/26 | | Date of Implementation | 1985/1/1 | | Adopted Standard | ISO 104-1979, MOD |
GB/T 301-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 21.100.20
J 11
Replacing GB/T 301-1995
Rolling Bearings – Thrust Ball Bearings –
Boundary Dimensions
滚动轴承 圆锥滚子轴承 外形尺寸
ISSUED ON. DECEMBER 31, 2015
IMPLEMENTED ON. APRIL 1, 2015
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Application Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 4
4 Symbols ... 4
5 Codes ... 6
6 Designation Example ... 6
7 Dimensions... 7
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 301-1995, Rolling Bearings – Thrust Ball Bearings -
Boundary Dimensions. Compared with GB/T 301-1995, the main technical changes of
this Standard are as follows.
-- it adds normative references, terms and definitions and codes (see Chapter 2,
Chapter 3 and Chapter 5);
-- it modifies part of symbols and definitions (see Chapter 4; Chapter 2 of 1995);
-- it deletes the structural diagrams and dimensions tables (see Figure 3 to Figure
6 and Table 8 to Table 13 of Edition 1995);
-- it adds the types and dimensions of some bearings (see Table 1, Table 2 and
Table 4 to Table 7); and
-- it deletes the annex of “cross reference of structural type codes of old and new
bearings” (see Annex A of Edition 1995).
This Standard was proposed by China Machinery Industry Federation.
This Standard shall be under the jurisdiction of the National Standardization Technical
Committee on Rolling Bearings (SAC/TC 98).
The drafting organizations of this Standard. Harbin Bearing Group Corp., Luoyang
Bearing Research Institute Co., Ltd. and Zhejiang Meiyate Precision Transfers
Component Co., Ltd.
The main drafters of this Standard. Song Yucong, Yong Taifang, Zhou Youfeng, Jia
Qiusheng and Weng Shixi.
The editions of the standard replaced by this Standard are as follows.
-- GB/T 301-1964, GB/T 301-1984 and GB/T 301-1995.
Rolling Bearings – Thrust Ball Bearings –
Boundary Dimensions
1 Application Scope
This Standard specifies boundary dimensions of single-direction and double-direction
thrust ball bearings which conform to GB/T 273.2.
This Standard applies to design and selection of bearings.
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to this Standard.
GB/T 272, Rolling Bearing – Identification Code
GB/T 273.2, Rolling Bearings – Thrust Bearings – Boundary Dimensions General
Plan
GB/T 274, Rolling Bearings – Chamfer Dimension – Maximum Values
GB/T 6930, Rolling Bearings – Vocabulary
GB/T 7811, Rolling Bearings – Symbols for Physical Quantities
JB/T 2974-2004, Rolling Bearings – Identification Code – Supplemental
Regulations
3 Terms and Definitions
For the purpose of this document, the terms and definitions defined in GB/T 6930 shall
apply.
4 Symbols
The following symbols and those given in GB/T 7811 apply to this document.
Unless specified otherwise, the symbols shown in Figure 1 and Figure 2 and the
......
|