HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189760 (15 Feb 2025)

GB/T 29866-2013 English PDF

GB/T 29866-2013_English: PDF (GB/T29866-2013)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 29866-2013English189 Add to Cart 3 days [Need to translate] Textiles -- Test method for heat generating by moisture absorption properties Valid GB/T 29866-2013


BASIC DATA
Standard ID GB/T 29866-2013 (GB/T29866-2013)
Description (Translated English) Textiles. Test method for heat generating by moisture absorption properties
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard W04
Classification of International Standard 59.080.30
Word Count Estimation 8,858
Quoted Standard GB/T 6529; GB/T 8170; GB/T 9995
Drafting Organization Shanghai entry exit inspectionand Quarantine Bureau
Administrative Organization National Textile basic standards Standardization Technical Committee of Technical Committee
Regulation (derived from) National Standards Bulletin No. 22 of 2013
Proposing organization China Textile Industry Federation
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the test methods for textile heat absorption properties. This standard applies to all types of textiles and its products.


GB/T 29866-2013 Textiles. Test method for heat generating by moisture absorption properties ICS 59.080.30 W04 National Standards of People's Republic of China Heat absorbent textile performance test method Issued on. 2013-11-12 2014-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Foreword This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Textile Industry Association. The standard basis by the National Textile Standards Technical Committee of Standardization Technical Committee (SAC/TC209/SC1) centralized. This standard was drafted. Shanghai Exit Inspection and Quarantine, the State Quality Supervision and Inspection Center knitted products, Shanghai Aili Clothing repair inspection Li Limited. The main drafters of this standard. Lu Weimin, Yuan Zhilei, Liu Fang, Liang Guobin, Liufeng Rong, single Lijuan. Heat absorbent textile performance test method 1 Scope This standard specifies the test method for heat absorption properties of textiles. This standard applies to all kinds of textiles and its products. 2 Normative references The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 6529 Textiles Standard conditioning and testing atmosphere GB/T 8170 repair value expressed about the rules and limit values \u200b\u200band judgment GB/T 9995 Textile material moisture content and moisture determination oven drying method 3 Terms and Definitions The following terms and definitions apply to this document. 3.1 Heat absorbent performance heatgeneratingbymoistureabsorptionproperty Fiber macromolecule polar group environment to attract and bind water molecules, the water molecules of kinetic energy into heat, so that the sample temperature rise High performance. Principle 4 Dried specimen was placed in a certain temperature and humidity chamber, the sample due to moisture absorption caused by temperature changes, recorded within a certain time the sample over time Temperature, maximum temperature and average temperature values \u200b\u200bcharacterizing heat absorption properties. 5 Equipment 5.1 temperature and humidity chamber 5.1.1 The test chamber is equipped with temperature and humidity sensors and measuring devices, the inside temperature of (20 ± 0.5) ℃, relative humidity of (90 ± 3)%. 5.1.2 Test chamber having stable circulating airflow of 0.3m/s ~ 0.5m/s. 5.1.3 The chamber is placed in GB/T 6529 standard prescribed atmosphere. 5.2 temperature sensor and a temperature recorder Sensor accuracy of 0.1 ℃, the surface should be sufficient contact with the sample, but avoid drawing the sample. 5.3 airtight container The sample size should be suitable for placement. ......

Similar standards: GB/T 29862-2013  GB/T 29864-2013  GB/T 29865-2013  
Similar PDFs (Auto-delivered in 9 seconds): GB/T 29862-2013  GB/T 30126-2013  GB/T 30127-2013  GB/T 30159.1-2013