GB/T 28796-2021_English: PDF (GB/T28796-2021)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 28796-2021 | English | 170 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Craft crystal decoration
| Valid |
GB/T 28796-2021
|
GB/T 28796-2012 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Craft crystal decoration
| Obsolete |
GB/T 28796-2012
|
Standard ID | GB/T 28796-2021 (GB/T28796-2021) | Description (Translated English) | Craft crystal decoration | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | Y88 | Classification of International Standard | 97.195 | Word Count Estimation | 9,980 | Date of Issue | 2021-10-11 | Date of Implementation | 2022-05-01 | Older Standard (superseded by this standard) | GB/T 28796-2012 | Quoted Standard | GB/T 191; GB/T 7962.1; GB 28480 | Drafting Organization | Pujiang County Dongzhou Crystal Co., Ltd. | Administrative Organization | National Daily Glass Standardization Technical Committee | Regulation (derived from) | National Standard Announcement No. 12 of 2021 | Proposing organization | China National Light Industry Council | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration | Summary | This standard specifies the terms and definitions, requirements, test methods, inspection rules, signs, packaging, transportation and storage of craft crystal jewelry. This standard applies to craft crystal jewelry (hereinafter referred to as jewelry) made with synthetic crystal, crystal glass and natural crystal as the main raw materials. | Standard ID | GB/T 28796-2012 (GB/T28796-2012) | Description (Translated English) | Craft crystal decoration | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | Y88 | Classification of International Standard | 97.195 | Word Count Estimation | 9,914 | Quoted Standard | GB/T 191; GB/T 7962.1; GB/T 7962.12; GB/T 16552; GB/T 16553; GB 28480 | Drafting Organization | Zhejiang Arts Crystal Jewelry Co. | Administrative Organization | National Standardization Technical Committee daily glass | Regulation (derived from) | National Standards Bulletin 2012 No. 28 | Proposing organization | China Light Industry Association | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | Summary | This standard specifies the process of crystal jewelry terminology and definitions, product classification, requirements, test methods, inspection rules, marking, packaging, transport and storage. This standard applies to natural crystal, synthetic quartz |
GB/T 28796-2021
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 97.195
CCS Y 88
Replacing GB/T 28796-2012
Craft crystal decoration
工艺水晶饰品
ISSUED ON: OCTOBER 11, 2021
IMPLEMENTED ON: MAY 01, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions... 5
4 Requirements ... 6
5 Test methods ... 7
6 Inspection rules ... 9
7 Marking, packaging, transportation, storage ... 10
Craft crystal decoration
1 Scope
This Standard specifies the terms and definitions, requirements, test methods,
inspection rules, marking, packaging, transportation and storage for craft crystal
decoration.
This Standard applies to craft crystal decoration (hereinafter referred to as the
decoration) that takes synthetic crystal, crystal glass and natural crystal as the main raw
materials.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 191, Packaging and storage marks
GB/T 7962.1, Test methods of colourless optical glass - Part 1: Refractive index and
coefficient of dispersion
GB 28480, Adornment - Provision for limit of baneful elements
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 craft crystal decoration
with synthetic crystal, crystal glass and natural crystal as the main raw materials, the
artworks, handicrafts, decorations and daily necessities that are made by mechanical
and manual processing and assembly such as thermoforming, cutting, grinding and
polishing
3.2 synthetic quartz
a crystalline material formed under artificial conditions with silica as the main raw
material; its crystal structure is similar to that of natural crystal, the color is uniform,
and the crystal defects are few
5.5.3 Weighing of specimen
Weigh 0.5000g (accurate to 0.0001g) of specimen. The specimen weighing operation
shall be as fast as possible to avoid moisture absorption of the specimen.
5.5.4 Digestion of specimen
5.5.4.1 Place the weighed specimen in a 35mL platinum crucible. Moisten with a little
distilled water. Add 8mL of hydrofluoric acid and 5mL of sulfuric acid (1+1). Heat
slowly in a fume hood to decompose until smoking.
5.5.4.2 Cool after the smoke disappears. Use distilled water to rinse the inner wall of
the platinum crucible. Add 3mL of sulfuric acid (1+1). Then heat and smoke.
5.5.4.3 Cool to room temperature. Use distilled water to dissolve the residue. Transfer
to a 50mL volumetric flask. Dilute to the scale. Shake well for later use.
5.5.5 Specimen measurement
Use atomic absorption spectrophotometry (flame method) to determine. Use the direct
comparison method to perform quantification.
5.6 Color stability
Use a 40W UV lamp (wavelength 253.7nm) to irradiate at a distance of 20cm from the
surface of the decoration.
6 Inspection rules
6.1 Exit-factory inspection
6.1.1 Batching
Products of the same variety, type and level produced in each shift are grouped as a
batch.
6.1.2 Sampling
10 samples are randomly selected from each batch. 5 pieces are for inspection samples,
and 5 pieces are for preparation samples. If the total number of products in the batch is
less than 10, full inspection will be conducted.
6.1.3 Inspection items
Visual inspection items in appearance quality, dimensional tolerance, and assembly
requirements.
6.1.4 Inspection methods
Each batch of exit-factory inspection items must be accepted. If one item fails, the
responsible department shall decide to scrap or re-inspect the batch after analyzing the
specific failure situation. If the product resubmitted for inspection still fails to meet the
requirements, the batch will be deemed rejected.
6.2 Type inspection
6.2.1 When designing a new product or improving the original product, when there is a
major change in the production process, when there is a large difference between the
exit-factory inspection and the last type inspection result, the type inspection shall be
carried out.
6.2.2 Type inspection shall randomly select samples from mass-produced products
according to the provisions of 6.1.2. Check item by item according to all items in
Chapter 4. The test method shall be carried out in accordance with the provisions of
Chapter 5.
6.2.3 During the type inspection, all inspection items shall be accepted.
6.2.4 Inspection item classification:
a) Class A: Refractive index, transmittance, surface roughness, lead, cadmium;
b) Class B: Dimensional tolerances, assembly requirements, color stability;
c) Class C: Appearance quality (including overall appearance, engraved lines, bubble
diameter, allowable number of visible bubbles, color uniformity).
6.3 Determination rules
When all inspection items are accepted, the batch of products shall be accepted. If an
item in Class A fails, the batch of products shall be rejected. When an item in Class B
fails, if the re-inspection procedure passes the inspection, the batch of products shall be
determined as rejected. If it is still fails, the product will be determined as rejected. If
there are two or more failed items in Class C, the batch of products will be determined
as rejected.
7 Marking, packaging, transportation, storage
7.1 Marking
The product or the outer packing box shall have the product name, product standard
number, raw material name, quality grade, inspection certificate, enterprise name and
address, quantity, net weight and other signs. The symbols shown in the figure, that the
product shall be handled with care, the product is fragile, the product shall be put
upward and be moisture-proof, shall comply with the provisions of GB/T 191.
......
GB/T 28796-2012
ICS97.195
Y88
National Standards of People's Republic of China
Process crystal jewelry
Issued on. 2013-03-01 2012-11-05 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Category 2
5 Requirement 2
6 Test Method 3
7 Inspection Rule 4
8 signs, packaging, transportation and storage 5
Foreword
This standard rule according to GB/T 1.1-2009 given draft.
The standard proposed by China National Light Industry Council.
This standard by the National Standardization Technical Committee household glass (SAC/TC377) centralized.
This standard was drafted. Arts for Zhejiang Crystal Jewelry Co., Ltd. Jinhua Kang Teman Crystal Jewelry Co., Zhejiang Pujiang Shanghai Pudong Real
Industry Co., Ltd. Zhejiang Pujiang day-long crystal gemstones, aquamarine Optical Materials Co., Ltd., Zhejiang, Zhejiang Pujiang crystal craft Audley
Ltd., Hangzhou Iron-ying Crystal Technology Co., Ltd. Pujiang County Quality and Technical Supervision and Testing Center, Tsinghua University, Beijing University of Technology, Donghua
the University.
The main drafters of this standard. the cloud method, Chenwei Xiang, Wang Yuancheng, Qiupei Yu, Wang Xianting, Yuxuan Yao, Yao Zuyi, Dewey, Wang Jianzhong,
Tianying Liang, Ning Wei.
Process crystal jewelry
1 Scope
This standard specifies the terms and definitions of crystal jewelry, product classifications, requirements, test methods, inspection rules, marking, packaging, transportation
And storage.
This standard applies to natural crystal, synthetic crystal, quartz glass and crystal glass as raw material in the process of crystal jewelry (hereinafter referred to as
accessories).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packing Pictorial marking
GB/T 7962.1 Colourless optical glass test methods - Part 1. refractive index and Abbe number
GB/T 7962.12 Colourless optical glass test methods - Part 12. spectral transmittance
GB/T 16552 jewelery name
GB/T 16553 jade jewelry appraisal
Jewelry GB 28480 provisions of harmful substances
3 Terms and Definitions
GB/T 16552 and GB/T 16553 as defined in the following terms and definitions apply to this document.
3.1
Process crystal jewelry craftcrystaldecoration
Natural crystal, synthetic crystal, quartz glass and crystal glass as raw materials, thermoforming, mechanical and manual processing and assembly made
Artwork, handicrafts, ornaments, daily necessities.
3.2
Crystal glass crystalglass
For the manufacture of advanced vessels, art and decoration of glass, it has a high transparency, good surface gloss, crystal clear, heat
Molding, mechanical or manual processing, showed good photochromic properties.
3.3
Natural crystal rockcrystal
At a certain temperature and pressure crystallized natural environment, the main ingredient is silica. Colorless transparent multi-color, purple, brown,
Green and so on, mostly contain hairline crystals, bubbles, impurities and crystal turbidity, also known as quartz.
3.4
Synthetic crystal syntheticquartz
Simulation of natural crystal in nature generate conditions to silica-generating reactor and other equipment in the crystal body,
Natural crystal has the same crystal structure, its color is more uniform and less crystal defects.
3.5
Quartz glass fusequartz
Glass, the silica content of the silica single component generally above 99.5%, divided into transparent and opaque quartz glass, comprising less
......
|