GB/T 25199-2014 (GBT25199-2014)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
GB/T 25199-2014	English	519	Add to Cart	4 days [Need to translate]	Biodiesel fuel blends (B5)	GB/T 25199-2014	Obsolete	GB/T 25199-2014

GB/T 25199-2014
Biodiesel fuel blends (B5)
ICS 75.160.20
E31
National Standards of People's Republic of China
Replacing GB 25199-2010
Biodiesel blended fuel (B5)
Issued on. 2014-02-19
2014-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB/T 25199-2010 "biodiesel blended fuel (B5)". This standard and GB/T 25199-2010 compared to primary
To change the following.
--- Category "B5 light diesel oil" was changed to "ordinary diesel B5", B5 diesel into diesel B5 (Ⅲ) and B5 diesel vehicles
Oil (Ⅳ), "B5 ordinary diesel" and "B5 diesel" definition also revised accordingly;
--- B5 ordinary diesel fuel sulfur content (mass fraction) was revised to no more than 0.035%;
--- Increase B5 diesel (Ⅳ) technical requirements and test methods.
--- Biodiesel (fatty acid methyl ester) content (volume fraction) to read 1% to 5%;
--- Cold filter plugging point index increased footnote. "For the deployment of bio-diesel fuel blending November 15 that year to next March 15 to use
(B5), the biodiesel (BD100) cold filter plugging point of not greater than 8 ℃ ";
--- Added Appendix C.
This standard by the National Standardization Technical Committee on products and lubricant oil (SAC/TC280) proposed.
This standard by the National Petroleum Products and Lubricants Standardization Technical Committee of petroleum fuels and lubricants at the Technical Committee will shellfish
(SAC/TC280/SC1) centralized.
This standard was drafted. China Petroleum & Chemical Corporation Research Institute of Petroleum.
The main drafters of this standard. Lin Jianmin, Zhang Yongguang, Tze, Song Haiqing.
This standard was first released in 2010, this is the first revision.
Biodiesel blended fuel (B5)
Warning. If you do not observe proper precautions, this product may be hazardous to your standard in the production, storage and use of the process.
This standard is not intended to present all of the safety issues related to the product recommendations. Before using this standard has the responsibility to establish appropriate safety
Full and preventive measures, and determine the applicability of regulatory limitations related.
1 Scope
This standard specifies the biodiesel and petroleum diesel blending biodiesel blended fuel (B5) terms and definitions, classification and labeling,
Requirements and test methods, inspection rules and signs, packaging, transportation and storage and security.
This standard applies to compression ignition engines for use in bio-diesel blending component B5 ordinary diesel and B5 diesel.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 190 packaging and marking of dangerous goods
GB 252 ordinary diesel
GB/T 261 Flash Point by Pensky - Martens closed cup method
GB/T 264 Petroleum products - Determination of acid number
GB/T 265 Petroleum products - Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 268 Petroleum products - Determination of carbon residue (Conradson method)
GB/T 386 Determination of cetane number
GB/T 508 Petroleum products - Determination of ash
GB/T 510 Petroleum products - Determination of solidification point
GB/T 511 petroleum and petroleum products and additives Determination of mechanical impurities
GB/T 1884 crude oil and liquid petroleum products - Laboratory determination of density (density meter method)
GB/T 1885 Petroleum Measurement Tables
GB/T 4756 petroleum liquids hand sampling method
GB/T 5096 petroleum products copper corrosion test
GB/T 6536 Petroleum products - Determination of distillation characteristics at atmospheric pressure
GB/T 7304 Petroleum products and lubricants - Determination of acid number (potentiometric titration)
GB/T 11140 Petroleum product