GB/T 24551-2021_English: PDF (GB/T24551-2021)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 24551-2021 | English | 185 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Safety belt reminder for motor vehicles
| Valid |
GB/T 24551-2021
|
| GB/T 24551-2009 | English | 70 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Safety belt reminder for motor vehicles
| Obsolete |
GB/T 24551-2009
|
| Standard ID | GB/T 24551-2021 (GB/T24551-2021) | | Description (Translated English) | Safety belt reminder for motor vehicles | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | T09 | | Classification of International Standard | 43.020 | | Word Count Estimation | 9,995 | | Date of Issue | 2021-12-31 | | Date of Implementation | 2022-07-01 | | Older Standard (superseded by this standard) | GB/T 24551-2009 | | Quoted Standard | GB 4094-2016 | | Drafting Organization | China Automotive Technology and Research Center Co., Ltd. | | Administrative Organization | National Automotive Standardization Technical Committee | | Regulation (derived from) | National Standard Announcement No. 17 of 2021 | | Proposing organization | Ministry of Industry and Information Technology of the People's Republic of China | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration | | Summary | This standard specifies the terms and definitions, requirements and test methods of automotive seat belt reminder devices. This standard applies to the seat belt reminder devices for the driver's seat position and the driver's seat position in the same row of vehicles of M and N categories, as well as the seat belt reminder device for the rear passenger seat position of M1 and N1 category vehicles, other The seat belt reminder device at the seat position can be implemented by reference. | | Standard ID | GB/T 24551-2009 (GB/T24551-2009) | | Description (Translated English) | Safety belt reminder for motor vehicles | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | T09 | | Classification of International Standard | 43.020 | | Word Count Estimation | 5,556 | | Date of Issue | 2009-10-30 | | Date of Implementation | 2010-07-01 | | Quoted Standard | GB 4094-1999 | | Drafting Organization | China Automotive Technology and Research Center | | Administrative Organization | National Automotive Standardization Technical Committee | | Regulation (derived from) | National Standard Approval Announcement 2009 No.12 (Total No.152) | | Proposing organization | National Development and Reform Commission | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration Committee | | Summary | This standard specifies the definition of automobile seat belt reminder device, indication signal and technical requirements. This standard applies to the M (1) class automotive seat belts for driver seat position and/or front passenger seating positions reminder. Other seating position and other models of seat belt reminder may refer to the M (1) class cars. |
GB/T 24551-2021
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.020
CCS T 09
Replacing GB/T 24551-2009
Safety Belt Reminder for Motor Vehicles
ISSUED ON: DECEMBER 31, 2021
IMPLEMENTED ON: JULY 01, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Terms and Definitions ... 5
4 Technical Requirements ... 7
5 Test Methods ... 9
Safety Belt Reminder for Motor Vehicles
1 Scope
This Document specifies the terms and definitions, requirements and test methods of seat belt
reminder for motor vehicles.
This Document applies to the seat belt reminder for the driver's seat position and the passenger
seat position in the same row with the driver's seat of the Categories M and N vehicles; and the
seat belt reminder for the rear passenger seat position of the Categories M1 and N1 vehicles;
the seat belt reminder for other seat positions can be implemented by reference.
2 Normative References
The provisions in following documents become the provisions of this Document through
reference in this Document. For the dated documents, only the versions with the dates indicated
are applicable to this Document; for the undated documents, only the latest version (including
all the amendments) is applicable to this Document.
GB 4094-2016 Motor Vehicles - Symbols for Controls, Indicators and Tell-Tales
3 Terms and Definitions
For the purposes of this Document, the following terms and definitions apply.
3.1 First level warning
A visual warning that is activated when the ignition switch or master switch is turned on
(vehicle drive running or not), in the "ON" or "READY" state (or equivalent), and any
passenger in the vehicle is not wearing a seat belt.
NOTE: Audible warning can be attached.
3.2 Second level warning
Visual and audible warnings that are activated when the vehicle is moving and any passengers
in the vehicle are not wearing or opening their seat belts.
3.3 Safety-belt reminder
The system that warns the driver when any passenger in the vehicle is not wearing a seat belt,
consisting of a detection device for not wearing a seat belt and two-level warnings (first level
4.2.2.2 The audible warning signal shall be easily recognized by the driver.
4.2.3 First level warning
4.2.3.1 When any passenger in the vehicle is not wearing a seat belt and the ignition switch or
main control switch is turned on, in the "ON" or "READY" state (or the equivalent state), the
first level warning shall be activated.
4.2.3.2 The first level warning described in 4.1.1 shall have a continuous visual warning signal,
and the first level warning described in 4.1.2 shall have a visual warning signal that lasts no
less than 60s.
4.2.3.3 The first level warning can be stopped when any of the following conditions are met:
a) the seat belt that activates the warning is fastened;
b) There is no longer a passenger in the seat for which the warning is activated.
4.2.3.4 After the first level warning is stopped, if the activation conditions described in 4.2.3.1
are met again, the first level warning shall be reactivated.
4.2.3.5 The activation of the first level warning shall be tested according to the test method of
5.1.
4.2.4 Second level warning
4.2.4.1 The driving conditions for the activation of the second level warning shall be any one
or more combinations of the following conditions:
a) The continuous forward driving distance of the vehicle exceeds the distance limit, and the
distance limit shall not exceed 300m;
b) The forward speed of the vehicle exceeds the speed limit, and the speed limit shall not
exceed 15km/h;
c) The forward travel time of the vehicle exceeds the time limit, and the time limit shall be
no greater than 60s.
4.2.4.2 When the vehicle is not in normal operation and any door is opened or there is no
passenger in the seat for which the warning is activated, the activated driving conditions listed
in 4.2.4.1 above can be reset (recalculated by zeroing).
4.2.4.3 For the case of unfastening the seat belt described in 4.3.2 and 4.4.4, the activated
driving condition described in 4.2.4.1 shall be measured and calculated from the moment when
the seat belt is unfastened.
4.2.4.4 The second level warning shall include visual warning and audible warning signals lasts
at least 30s, and each interval time of the audible warning signals shall be no greater than 3s (as
shown in Figure 1). When the first level warning is still activated, the second level warning
shall replace the first level warning.
4.2.4.5 The second level warning can be stopped when any of the following conditions are met:
a) the seat belt that activates the warning is fastened;
b) the vehicle is not in normal operation condition;
c) There is no more passenger in the seat for which the warning is activated.
4.2.4.6 After the second level warning is stopped, if the activation conditions described in 4.3.2
or 4.4.4 are met again, the second level warning shall be reactivated.
4.2.4.7 The activation of the second level warning shall be tested according to the test method
of 5.2.
4.3 Seat belt reminder for driver and passengers in the same row
4.3.1 The seat belt reminder for the driver and the passengers in the same row shall meet the
requirements of 4.2.
4.3.2 When the seat belt of any passenger in the front row is not fastened or the seat belt is
unfastened while the vehicle is in normal operation, and the activation driving conditions
described in 4.2.4.1 are met, the second level warning shall be activated.
4.4 Seat belt reminder for the rear passengers
4.4.1 The seat belt reminder for rear passengers shall meet the requirements of 4.2.
4.4.2 The visual warning shall have supplementary information indicating all rear seats,
enabling the driver to identify the seat without a seat belt fastened when facing forward. This
clause does not apply to vehicles with rear passenger detection device.
4.4.3 The warning signs of the seat belt reminders for the seats described in 4.1.1 and 4.1.2 may
be shared.
4.4.4 For a vehicle with a rear passenger detection device, when any safety belt of passenger in
the rear seat is not fastened or the seat belt is unfastened while the vehicle is in normal operation,
and the activation driving conditions described in 4.2.4.1 are met, the second level warning
shall be activated. For vehicles without rear passenger detection devices, when the seat belt is
unfastened while the vehicle is in normal operation, and the activation driving conditions
described in 4.2.4.1 are met, the second level warning shall be activated.
5 Test Methods
5.1 First level warning
b) Drive the vehicle into a normal operating state and maintain it;
c) Unfasten the seat belt of the driver's seat;
d) Measure and calculate from the moment when the seat belt is unfastened. When the
driving conditions determined in 5.2.1 are met, check the status of the seat belt reminder
on the driver's seat.
5.2.3 Test on passenger seat in the same row with driver and rear passenger seat with
passenger detection device
5.2.3.1 In the condition that the seat belt is not fastened before the vehicle is driven, the test of
each passenger seat shall be carried out according to the following procedures:
a) All passenger seat belts are not fastened;
b) the driver's seat belt is fastened;
c) Place a load of 40kg on the seat cushion, or place a dummy or person representing the 5th
percentile adult female; alternative methods specified by the manufacturer and approved
by the certification body can also be used to simulate the state of the passenger’s riding
the vehicle; and the alternative load shall not exceed 40kg;
d) Drive the vehicle according to the driving conditions determined in 5.2.1;
e) When the above driving conditions are met, check the status of the seat belt reminder for
the seat.
5.2.3.2 In the condition that the seat belt is unfastened when the vehicle is running, the test of
each passenger seat shall be carried out according to the following procedures:
a) Place a load of 40kg on the seat cushion, or place a dummy or person representing the 5th
percentile adult female; alternative methods specified by the manufacturer and approved
by the certification body can also be used to simulate the state of the passenger’s riding
the vehicle; and the alternative load shall not exceed 40kg;
b) All seat belts are fastened;
c) Drive the vehicle into a normal operation state and maintain it;
d) Unfasten a passenger seat belt;
e) Measure and calculate from the moment when the seat belt is unfastened. When the
driving conditions determined in 5.2.1 are met, check the status of the seat belt reminder
for the seat.
5.2.4 Test on the rear passenger seat without passenger detection device
......
GB/T 24551-2009
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.020
T 09
Safety Belt Reminder for Motor Vehicles
ISSUED ON. OCTOBER 30, 2009
IMPLEMENTED ON. JULY 1, 2010
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Terms and Definitions ... 4
4 Requirements ... 5
Foreword
This Standard was prepared according to the technical contents of World Forum for
Harmonization of Vehicle Regulations Passive Safety Working Group Working
Document WP29/GRSP-35-18 Safety Belt Reminder – Technical Requirements (May,
2004), and Addendum 4 (April 2008) of 04 series (Version 5) of ECE R16 Performance
Requirements and Test Methods of Safety-Belts, Restrain Systems, Child Restraint
Systems and ISOFIX Child Restraint Systems for Occupants of Power-Driven Vehicles
(English Version).
This Standard was proposed by National Development and Reform Commission.
This Standard shall be under the jurisdiction of National Technical Committee for
Standardization of Automotive.
Drafting organization of this Standard. China Automotive Technology & Research
Center.
Chief drafting staffs of this Standard. Sun Zhendong, Li Weijing, and Wu Wei.
Safety Belt Reminder for Motor Vehicles
1 Scope
This Standard specifies the definition, indication signal and technical requirements of
safety belt reminder for motor vehicles.
This Standard is applicable to the safety belt reminder on the Type-M1 vehicle’s driver
seat position and/or front-row passenger seat position. The safety belt reminder on the
other seat positions on the Type-M1 vehicle and other type of vehicles can be
implemented for reference.
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments
(excluding corrigendum) or revisions do not apply to this Standard, however, parties
who reach an agreement based on this Standard are encouraged to study if the latest
versions of these documents are applicable. For undated references, the latest edition
of the referenced document applies.
GB 4094-1999 Motor Vehicles – Symbols for Controls, Indicators and Tell-Tales
3 Terms and Definitions
The following terms and definitions are applicable to this Standard.
3.1 Safety belt reminder
The system, when the occupant is not fastening the safety belt, reminds the occupant.
Such system consists of detecting the not fastened safety belt sensor and first alert
level and/or second alert level.
3.2 First alert level
The audible signal can be attached with a visual signal activated when the occupant is
not fastening the safety belt.
3.3 Second alert level
......
|