GB/T 2101-2017 PDF English
US$70.00 · In stock · Download in 9 secondsGB/T 2101-2017: General Requirement of Acceptance, Packaging, Marking and Certification for Section Steel Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 2101: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 2101-2017 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
General Requirement of Acceptance, Packaging, Marking and Certification for Section Steel
| Valid |
| GB/T 2101-2008 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
General requirement of acceptance, packaging, marking, and certification for section steel
| Obsolete |
| GB/T 2101-1989 | English | 199 |
Add to Cart
|
2 days
|
General requirements of acceptance, packaging, marking, and certification for section steel
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 2101-2017
GB/T 2101-2017: General Requirement of Acceptance, Packaging, Marking and Certification for Section Steel
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2101-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.70
H 44
Replacing GB/T 2101-2008
General Requirement of Acceptance, Packaging,
Marking and Certification for Section Steel
Issued on. JULY 31, 2017
Implemented on. APRIL 1, 2018
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword... 3
1 Application Scope... 4
2 Normative References... 4
3 Terms and Definitions... 4
4 Inspection Rules... 6
5 Packaging... 8
6 Marking... 12
7 Storage... 12
8 Transportation... 13
9 Quality Certification... 13
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 2101-2008, General Requirement of Acceptance,
Packaging, Marking and Certification for Section Steel. Compared with GB/T 2101-
2008, the major changes of this Standard are as follows.
-- the terms are added;
-- the evaluation method for impact test results is added;
-- the inspection rules for section steel is modified;
-- the specifications for packaging are modified;
-- the packaging requirements for silver steel are deleted;
-- the specifications for marking are modified;
-- the specifications for storage and transportation are added;
-- the content specified for quality certification is modified.
This Standard was proposed by China Iron and Steel Industry Association.
This Standard shall be under the jurisdiction of National Technical Committee 183 on
Steels of Standardization Administration of China.
The drafting organizations of this Standard. HBIS Group TangSteel Company, China
Metallurgical Information and Standardization Institute, Shougang Group, Anshan
Baode Iron and Steel Co., Ltd., Sichuan Desheng Group Vanadium-Titanium Co., Ltd.,
Hebei Jinxi Iron and Steel Group Co., Ltd.
The main drafters of this Standard. Deng Cuiqing, Fan Lijuan, Wang Yujie, Xiong
Huabing, Wang Hongxin, Mei Jichang, Zhao Yichen, Liu Baoshi, Xu Feng, Luo
Qingming, Ye Gaoqi.
The previous editions of the standard replaced by this Standard are as follows.
-- GB/T 2101-1980, GB/T 2101-1989, GB/T 2101-2008.
General Requirement of Acceptance, Packaging,
Marking and Certification for Section Steel
1 Application Scope
This Standard specifies the terms and definitions, inspection rules and general
specifications for packaging, marking, storage, transportation and quality certification
of section steels (including billet, steel rod, reinforcing steel bar and steel wire rod).
This Standard applies to hot-rolled, cold-drawn (rolled), forged and heat-treated steels.
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to This Standard.
GB/T 15574, Steel Products Classification
3 Terms and Definitions
For the purposes of this Standard, the following terms and definitions apply.
3.1
packaging
The activity of applying certain technical methods during the process of using materials
and auxiliaries in order to protect products, facilitate storage and transportation and
promote sales during the process of circulation.
3.2
label
The product of paper or other materials fixed on packages, on which the content is
marked including product name, furnace/batch number, designation, specification and
manufacturer.
3.3
tap
A movable label which is fixed to packages or products using iron wire, staple bolt,
hobnail and so on.
3.4 mark
The method or content which identifies the characteristics of steels.
3.5
strapping
The flexible materials which are used to strap section steels or packages.
3.6
hand protector
The materials which are placed between section steels or between section steel and
strapping materials to prevent section steels being damaged or strapping materials
being cut off.
4 Inspection Rules
4.1 Inspection and acceptance
4.1.1 The quality of section steel shall be inspected and accepted by the quality
supervision department of the supplier.
4.2 Batching rules
Section steel shall be inspected and accepted by batch; and the batching rules shall
be as specified in the corresponding product standards.
4.3 Inspection items, sampling quantity, sampling locations and test methods
The inspection items, sampling quantity, sampling locations and test methods of
section steels shall be as specified in the corresponding product standards.
4.4 Where chemical composition inspection is specified in the product standards, the
corresponding product standards shall be implemented;
4.5 Criteria of impact test results
4.6 Rules for retest and determination
4.6.1 Sequential test (such as impact test)
In accordance with the criteria of impact test results specified in 4.5, when the results
are unacceptable, the sample products of the unacceptable test results shall be picked
out and scrapped, two samples products are taken from the rest of the test unit and a
new group of three test pieces are taken from each sample product. All the test results
of the two groups of test pieces shall be acceptable; or else, the test unit shall be
rejected.
4.6.2 Non-sequential test (such as tensile test and bending test)
4.6.2.1 If the unacceptable results are not calculated from the mean value but are
measured from the tests, such as tensile test and bending test, the following method
shall be used.
4.6.2.2 When the products’ retest results are unacceptable, the testing on each
products of the test unit is allowed and the delivery of acceptable single-piece products
is allowed.
4.6.3 Unallowed retest item
In case of any flake, retest is not allowed.
5 Packaging
5.1 General specifications
5.1.1 The section steels in bundles shall kept flush at both end.
5.2 Packaging materials
5.2.1 The section steels in bundles shall be strapped securely using strapping
materials.
5.2.2 In accordance with the requirements of the purchaser, protective materials for
strapping may be used between section steels and between section steels and
strapping materials, in order to protect section steels from being damaged and
strapping materials from being cut off.
5.2.3 In accordance with the requirements of the purchaser, protective packaging
materials may be used for packaging. The commonly-used protective materials include
kraft paper, volatile rust preventive paper, plastic film, grease-proof paper and so on.
5.3 Strapping package
5.3.1 Hot-rolled section steels
5.3.2 Cold-drawn steel
Cold-drawn steel shall be delivered in bundles or coils. The packages for delivery in
bundles shall be as specified in Table 2; and the packages for delivery in coils shall be
as specified in 5.3.1.7.
5.3.3 Cold-formed section steel
Cold-formed section steel is generally delivered in bundles or in single pieces; and the
packages in bundles shall be as specified in Table 3.
6 Marking
6.1 The marking shall be legible and indelible; and the words shall be clear, standard
and not easy to fade.
6.2 The marking shall include at least the following content. name or trademark of
manufacturer, product name, product standard number, designation,
6.3 The marking may be done by hot-rolled printing, jet printing, stamping, printing,
affixing (hanging) labels and tagging. The supplier may choose one or several marking
methods.
6.4 The section steels (except cold-drawn steel) delivered in single pieces shall be
marked on the end faces of section steel or near the ends.
7 Storage
7.1 Section steels shall be stored in a clean, dry and well-ventilated place.
7.2 There shall be no corrosive chemicals near section steels.
8 Transportation
8.1 Section steels shall be prevented from collision during transportation.
8.2 The effective protective measures for water-proofing and damp-proofing shall be
taken during transportation.
9 Quality Certification
9.1 Each batch of section steels delivered shall be accompanied by the quality
certificate to certify that the batch meets the requirements of standards and purchase
contracts.
9.2 The quality certificate shall be stamped by the quality supervision department of
the supplier.
9.3 The quality certificate shall include the following content.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 2101-2017 be delivered?Answer: The full copy PDF of English version of GB/T 2101-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 2101-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2101-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 2101-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 2101-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2101-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 2101-2017?A step-by-step guide to download PDF of GB/T 2101-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 2101-2017".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|