Chinese Standard: 'GB/T 19346.2-2017'
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | Related Standard |
GB/T 19346.2-2017 | English | 179 |
Add to Cart
|
Days<=3
|
Methods of measurement for amorphous and nanocrystalline alloys -- Part 2: Lamination factor of amorphous alloy strips
| Valid |
GB/T 19346.2-2017
|
GB/T 19346.2-2017 | Chinese | 15 |
Add to Cart
|
<=1-day
|
[PDF from Chinese Authority, or Standard Committee, or Publishing House]
| |
|
Standard ID | GB/T 19346.2-2017 (GB/T19346.2-2017) | Description (Translated English) | Methods of measurement for amorphous and nanocrystalline alloys--Part 2: Lamination factor of amorphous alloy strips | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | H21 | Classification of International Standard | 77.040.99 | Word Count Estimation | 10,140 | Date of Issue | 2017-09-07 | Date of Implementation | 2018-06-01 | Drafting Organization | China Steel Research Technology Group Co., Ltd., Aetna Technology Co., Ltd., Metallurgical Industry Information Standards Institute | Administrative Organization | National Steel Standardization Technical Committee (SAC / TC 183) | Proposing organization | China Iron and Steel Industry Association | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, China National Standardization Administration Committee |
GB/T 19346.2-2017
Methods of measurement for amorphous and nanocrystalline alloys - Part 2. Lamination factor of amorphous alloy strips
ICS 77.040.99
H21
National Standards of People's Republic of China
Amorphous nanocrystalline alloy test method
Part 2 - Strip lamination factor
Methods of measuring foramorphousandnanocrystalinealoys-
Part 2.Laminationfactorofamorphousaloystrips
2017-09-07 Posted
2018-06-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
GB/T 19346 "amorphous nanocrystalline alloy test method" to be divided into several parts.
--- Part 1. Ring sample exchange magnetic properties;
--- Part 2. Strip lamination factor;
This section GB/T 19346 Part 2.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part is proposed by China Iron and Steel Association.
This part of the National Standardization Technical Committee Steel (SAC/TC183) centralized.
This part of the drafting unit. China Steel Research Group Co., Ltd., Aetna Technology Co., Ltd., Metallurgical Industry Information Standards Institute.
The main drafters of this section.Chen Wenzhi, Li Deren, Lu Chao, Luan Yan, Li Zhun.
Amorphous nanocrystalline alloy test method
Part 2 - Strip lamination factor
1 Scope
This section GB/T 19346 specifies the method of measuring the lamination factor of amorphous nanocrystalline alloy strip by the plane pressure method and the coil method.
This section applies to the use of rapid quenching amorphous nanocrystalline alloy strip (hereinafter referred to as tape) lamination factor measurement, in which the plane
The pressure method is suitable for measuring the lamination coefficient of strip with rectangular core, adhesive block, etc. The lap method is suitable for lamination coefficient of strip for toroidal iron core
measuring.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 15019 rapid quenching metal classification and grades
JJF1305 line displacement sensor calibration specification
JJG669 pressure sensor
3 Terms and definitions
GB/T 15019 and defined by the following terms and definitions apply to this document.
3.1
Lamination factor lamination factor
The ratio of the cross-sectional area of the magnetic material to the total cross-sectional area of the stack.
4 Plane pressure method to measure lamination factor
4.1 Measurement principle
A section of the tape is cut into a certain number of sheet samples of a certain size, and then stacked in the same direction to form a sample stack neatly. In the regulations
The maximum thickness of the sample stack in the direction perpendicular to the casting direction of the strip is measured. According to the sample laminated quality, length, width, maximum thickness
Degree and material density and other parameters to calculate the lamination factor.
4.2 main equipment
4.2.1 General requirements
4.2.1.1 Lamination coefficient measurement system consists of pressure mechanism, line displacement sensor, clamping and moving mechanism (see Figure 1).
4.2.1.2 In order to avoid the impact of magnetic field or sample fragments on the measurement results, the various structural components in the system should be made of non-ferromagnetic materials.
4.2.1.3 The strength and rigidity of various structures in the system shall meet the requirements of measurement accuracy.
|