GB/T 19232-2019 PDF English
US$999.00 · In stock · Download in 9 secondsGB/T 19232-2019: Fan coil unit Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 19232: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 19232-2019 | English | 999 |
Add to Cart
|
7 days
|
Fan coil unit
| Valid |
| GB/T 19232-2003 | English | 959 |
Add to Cart
|
5 days
|
Fan coil unit
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 19232-2019
GB/T 19232-2019: Fan coil unit---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT19232-2019
(Fan coil unit)
ICS 91.140.30
P48
National Standards of People's Republic of China
Replace GB/T 19232-2003
Fan coil unit
Fancoilunit
Published on.2019-08-30
2020-07-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Classification and Marking 3
5 General requirements 3
6 Requirements 17
7 Test method 18
8 Inspection rules 24
9 Marking, packaging, transport and storage 26
Appendix A (normative appendix) Fan coil unit air volume test method 28
Appendix B (normative appendix) Fan coil unit cooling capacity and heat supply test method 33
Appendix C (normative appendix) Fan coil unit noise test method 42
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 19232-2003 "fan coil unit". Compared with GB/T 19232-2003, except editorial modification
The technical changes are as follows.
--- Revised the air volume and wind pressure range of standard products (see Chapter 1, Chapter 1 of the.2003 edition);
--- Increased the energy efficiency of the fan coil unit (see 5.7, 5.9, 5.11, 6.12, 6.13);
--- Increased requirements for dry fan coil units and single heating fan coil units (see 5.2, 5.8~5.11);
--- Increased the requirements for the permanent magnet synchronous motor fan coil unit (see 5.3, 5.6~5.11);
--- Increased performance requirements for four-controlled fan coil units (see 5.6, 5.7);
--- Revised the inspection item list (see Table 23, Table 9 of the.2003 edition).
This standard was proposed by the Ministry of Housing and Urban-Rural Development of the People's Republic
This standard is under the jurisdiction of the National Technical Committee for Standardization of HVAC and Purification Equipment (SAC/TC143).
This standard is drafted by. China Academy of Building Research Ltd.
Participated in the drafting of this standard. Shanghai Yikang Kaili Air Conditioning Equipment Co., Ltd., Shanghai Xinhuang Air Conditioning Equipment Co., Ltd., Jiangsu Wind
Shen Air Conditioning Group Co., Ltd., Johnson Controls Building Equipment Technology (Wuxi) Co., Ltd., Zhejiang Yilida Fan Co., Ltd., Shenzhen
Shenzhen McQuay Air Conditioning Co., Ltd., Wuxi Fuersheng Electromechanical Co., Ltd., Zhejiang Dunan Artificial Environment Co., Ltd., Qingdao Olikai
Central Air Conditioning Co., Ltd., Guangdong Midea HVAC Equipment Co., Ltd., Trane Air Conditioning System (China) Co., Ltd., Zhuhai Gree Electric Co., Ltd.
Company, Nanjing Tianjia Environmental Technology Co., Ltd., Guangdong Ouke Air Conditioning Refrigeration Co., Ltd., Changzhou Xiangming Motor Co., Ltd., Kunshan Taijia Machine
Electric Co., Ltd., Shandong Greed Group Co., Ltd., Bosch Thermotechnology (Shandong) Co., Ltd., Taizhou City, Zhejiang Province
Co., Ltd., Manruide Group Co., Ltd., Guangdong Xinling Air Conditioning Technology Co., Ltd., Regal Electric Group, Jingjiang City Spring Air Conditioning Refrigeration Equipment
Co., Ltd., Shanghai Tongyi Air Conditioning Equipment Co., Ltd., Jiangsu Jixiang Air Conditioning Equipment Co., Ltd., Jiangsu Daxiang Technology Co., Ltd., Jiangsu Ruixiang
Air Conditioning Equipment Co., Ltd., Jingjiang City Product Quality Comprehensive Inspection and Testing Center, Jingjiang Jiuzhou Air Conditioning Equipment Co., Ltd.
The main drafters of this standard. Cao Yang, Wang Lifeng, Li Qiang, Zheng Yi, Xu Jun, Lu Hui, Gu Bin, Zhang Qizhong, Zhou Wei, Zhi Zhengguang, Li Dongping,
Yan Wenbin, Ye Bin, Zhang Weijia, He Weiguang, Wu Xiaoquan, Chen Jun, Yuan Tao, Wang Zhichao, Li Hua, Liu Jinghui, Guan Zhiguang, Yu Weibo, Li Jianrong,
Chen Linan, Tan Xiaowei, Nie Qing, Liu Xingfei, Lu Fusong, Liu Guixing, Tao Yu, Li Jia, Zhang Lijun, Zhu Liqun, Yang Fang, Meng Lingran.
The previous versions of the standards replaced by this standard are.
---GB/T 19232-2003.
Fan coil unit
1 Scope
This standard specifies the terms and definitions, classification and marking, general requirements, requirements, and test methods of the fan coil unit (hereinafter referred to as “unit”).
Law, inspection rules, signs, packaging, transportation and storage.
This standard is applicable to the use of external cold water and hot water for cooling, heating or separate cooling and heating. The air supply is not greater than
3400m3/h, the unit with a static pressure of not more than 120Pa. Units of similar use can also be referred to for implementation.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon
GB/T 1040.1 Determination of tensile properties of plastics - Part 1. General
GB/T 2423.3 Environmental testing - Part 2. Test method test Cab. constant damp heat test
GB/T 2518 continuous hot-dip galvanized steel sheet and strip
GB/T 3198 aluminum and aluminum alloy foil
GB/T 3880 General industrial aluminum and aluminum alloy sheets and strips
GB/T 5171.1-2014 Low-power motors - Part 1. General technical conditions
GB/T 9068 Heating, Ventilation and Air Conditioning Equipment Noise Sound Power Level Determination Engineering Method
GB/T 11253 carbon structural steel cold rolled steel sheet and strip
Safety requirements for GB/T 12350 low power motors
GB/T 15675 continuous electroplating zinc, zinc-nickel alloy coated steel plate and steel strip
GB/T 17791 copper and copper alloy seamless tubes for air conditioning and refrigeration equipment
GB 50016-2014 Building Design Fire Code
JG/T 21-1999 Air Cooler and Air Heater Performance Test Method
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Fan coil unit fancoilunit
Equipment for air treatment, the basic configuration includes fans, coils, motors, condensate trays, etc., depending on the requirements of use, additional equipment
Install controllers, drain traps, air filtration and purification devices, inlet and outlet ducts, inlet and outlet wind distributors and other accessories.
3.2
Rated value
The basic value of the unit's performance under the test conditions specified by the standard.
3.3
Nominal value
The value on the product nameplate and on the product catalog.
GB/T 19232-2019
(Fan coil unit)
ICS 91.140.30
P48
National Standards of People's Republic of China
Replace GB/T 19232-2003
Fan coil unit
Fancoilunit
Published on.2019-08-30
2020-07-01 implementation
State market supervision and administration
China National Standardization Administration issued
Content
Foreword III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Classification and Marking 3
5 General requirements 3
6 Requirements 17
7 Test method 18
8 Inspection rules 24
9 Marking, packaging, transport and storage 26
Appendix A (normative appendix) Fan coil unit air volume test method 28
Appendix B (normative appendix) Fan coil unit cooling capacity and heat supply test method 33
Appendix C (normative appendix) Fan coil unit noise test method 42
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 19232-2003 "fan coil unit". Compared with GB/T 19232-2003, except editorial modification
The technical changes are as follows.
--- Revised the air volume and wind pressure range of standard products (see Chapter 1, Chapter 1 of the.2003 edition);
--- Increased the energy efficiency of the fan coil unit (see 5.7, 5.9, 5.11, 6.12, 6.13);
--- Increased requirements for dry fan coil units and single heating fan coil units (see 5.2, 5.8~5.11);
--- Increased the requirements for the permanent magnet synchronous motor fan coil unit (see 5.3, 5.6~5.11);
--- Increased performance requirements for four-controlled fan coil units (see 5.6, 5.7);
--- Revised the inspection item list (see Table 23, Table 9 of the.2003 edition).
This standard was proposed by the Ministry of Housing and Urban-Rural Development of the People's Republic
This standard is under the jurisdiction of the National Technical Committee for Standardization of HVAC and Purification Equipment (SAC/TC143).
This standard is drafted by. China Academy of Building Research Ltd.
Participated in the drafting of this standard. Shanghai Yikang Kaili Air Conditioning Equipment Co., Ltd., Shanghai Xinhuang Air Conditioning Equipment Co., Ltd., Jiangsu Wind
Shen Air Conditioning Group Co., Ltd., Johnson Controls Building Equipment Technology (Wuxi) Co., Ltd., Zhejiang Yilida Fan Co., Ltd., Shenzhen
Shenzhen McQuay Air Conditioning Co., Ltd., Wuxi Fuersheng Electromechanical Co., Ltd., Zhejiang Dunan Artificial Environment Co., Ltd., Qingdao Olikai
Central Air Conditioning Co., Ltd., Guangdong Midea HVAC Equipment Co., Ltd., Trane Air Conditioning System (China) Co., Ltd., Zhuhai Gree Electric Co., Ltd.
Company, Nanjing Tianjia Environmental Technology Co., Ltd., Guangdong Ouke Air Conditioning Refrigeration Co., Ltd., Changzhou Xiangming Motor Co., Ltd., Kunshan Taijia Machine
Electric Co., Ltd., Shandong Greed Group Co., Ltd., Bosch Thermotechnology (Shandong) Co., Ltd., Taizhou City, Zhejiang Province
Co., Ltd., Manruide Group Co., Ltd., Guangdong Xinling Air Conditioning Technology Co., Ltd., Regal Electric Group, Jingjiang City Spring Air Conditioning Refrigeration Equipment
Co., Ltd., Shanghai Tongyi Air Conditioning Equipment Co., Ltd., Jiangsu Jixiang Air Conditioning Equipment Co., Ltd., Jiangsu Daxiang Technology Co., Ltd., Jiangsu Ruixiang
Air Conditioning Equipment Co., Ltd., Jingjiang City Product Quality Comprehensive Inspection and Testing Center, Jingjiang Jiuzhou Air Conditioning Equipment Co., Ltd.
The main drafters of this standard. Cao Yang, Wang Lifeng, Li Qiang, Zheng Yi, Xu Jun, Lu Hui, Gu Bin, Zhang Qizhong, Zhou Wei, Zhi Zhengguang, Li Dongping,
Yan Wenbin, Ye Bin, Zhang Weijia, He Weiguang, Wu Xiaoquan, Chen Jun, Yuan Tao, Wang Zhichao, Li Hua, Liu Jinghui, Guan Zhiguang, Yu Weibo, Li Jianrong,
Chen Linan, Tan Xiaowei, Nie Qing, Liu Xingfei, Lu Fusong, Liu Guixing, Tao Yu, Li Jia, Zhang Lijun, Zhu Liqun, Yang Fang, Meng Lingran.
The previous versions of the standards replaced by this standard are.
---GB/T 19232-2003.
Fan coil unit
1 Scope
This standard specifies the terms and definitions, classification and marking, general requirements, requirements, and test methods of the fan coil unit (hereinafter referred to as “unit”).
Law, inspection rules, signs, packaging, transportation and storage.
This standard is applicable to the use of external cold water and hot water for cooling, heating or separate cooling and heating. The air supply is not greater than
3400m3/h, the unit with a static pressure of not more than 120Pa. Units of similar use can also be referred to for implementation.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon
GB/T 1040.1 Determination of tensile properties of plastics - Part 1. General
GB/T 2423.3 Environmental testing - Part 2. Test method test Cab. constant damp heat test
GB/T 2518 continuous hot-dip galvanized steel sheet and strip
GB/T 3198 aluminum and aluminum alloy foil
GB/T 3880 General industrial aluminum and aluminum alloy sheets and strips
GB/T 5171.1-2014 Low-power motors - Part 1. General technical conditions
GB/T 9068 Heating, Ventilation and Air Conditioning Equipment Noise Sound Power Level Determination Engineering Method
GB/T 11253 carbon structural steel cold rolled steel sheet and strip
Safety requirements for GB/T 12350 low power motors
GB/T 15675 continuous electroplating zinc, zinc-nickel alloy coated steel plate and steel strip
GB/T 17791 copper and copper alloy seamless tubes for air conditioning and refrigeration equipment
GB 50016-2014 Building Design Fire Code
JG/T 21-1999 Air Cooler and Air Heater Performance Test Method
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Fan coil unit fancoilunit
Equipment for air treatment, the basic configuration includes fans, coils, motors, condensate trays, etc., depending on the requirements of use, additional equipment
Install controllers, drain traps, air filtration and purification devices, inlet and outlet ducts, inlet and outlet wind distributors and other accessories.
3.2
Rated value
The basic value of the unit's performance under the test conditions specified by the standard.
3.3
Nominal value
The value on the product nameplate and on the product catalog.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 19232-2019 be delivered?Answer: The full copy PDF of English version of GB/T 19232-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 19232-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19232-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 19232-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 19232-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19232-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 19232-2019?A step-by-step guide to download PDF of GB/T 19232-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 19232-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|