GB/T 19230.2-2003 PDF English
US$70.00 · In stock · Download in 9 secondsGB/T 19230.2-2003: Test method for evaluating gasoline detergent in use -- Part 2: Test method for demulsibility of gasoline detergent Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 19230.2-2003 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Test method for evaluating gasoline detergent in use -- Part 2: Test method for demulsibility of gasoline detergent
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 19230.2-2003
GB/T 19230.2-2003: Test method for evaluating gasoline detergent in use -- Part 2: Test method for demulsibility of gasoline detergent
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT19230.2-2003
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 75.140
E 49
Test method for evaluating gasoline detergent in use - Part 2.
Test method for demulsibility of gasoline detergent
Issued on. JULY 01, 2003
Implemented on. DECEMBER 01, 2003
Issued by. General Administration for Quality Supervision Inspection and
Quarantine of PRC
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Terms and definitions... 4
4 Method overview... 6
5 Instruments... 6
6 Reagents... 6
7 Instrument preparation... 6
8 Preparation of test gasoline... 7
9 Test steps... 7
10 Report... 8
Foreword
GB/T 19230-2003 "Test method for evaluating gasoline detergent in use" is divided into
six parts.
- Part 1.Test method for rust-preventing characteristics of gasoline detergent;
- Part 2.Test method for demulsibility of gasoline detergent;
- Part 3.Test method for evaluating gasoline detergent produced effect for electronic
port fuel injector (PFI) fouling;
- Part 4.Test method for influence of induction system deposit (ISD) tendencies of
gasoline detergent;
- Part 5.Engine dynamometer test method for influence of intake valve and
Combustion chamber deposit tendencies of gasoline detergent (Ford 2.3L method);
- Part 6.Engine dynamometer test method for influence of intake valve and
combustion chamber deposit tendencies of gasoline deter (M111 method).
This Part was proposed by the Ministry of Communications of the People's Republic of
China.
This Part shall be under the jurisdiction of China Petrochemical Corporation.
Drafting organizations of this standard. Highway Science Research Institute of Ministry
of Communications, China Petroleum Lubricant Research and Development Center.
The main drafters of this Part. Guo Donghua, Xu Xiaohong, Zhang Jun, Wu Wei, Peng
Wei, Guo Yiming.
Test method for evaluating gasoline detergent in use - Part 2.
Test method for demulsibility of gasoline detergent
1 Scope
This Part specifies the test methods and test equipment for the demulsibility
performance of gasoline detergents.
This Part applies to the evaluation of the demulsibility performance of gasoline
detergents.
2 Normative references
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For the dated references, the subsequent amendments
(excluding corrections) or revisions do not apply to this Standard; however, parties who
reach an agreement based on this Standard are encouraged to study if the latest versions
of these documents are applicable. For undated references, the latest edition of the
referenced document applies.
GB/T 11117.2 Knock test reference fuels - Reference fuel - n-Heptane
3 Terms and definitions
The following terms and definitions apply to this Part.
3.1
Film
A thin, translucent layer, which does not stick to the walls of glass cylinders.
3.2
Lace
Fibers thicker than fine fragments, OR fibers more than 10% bonded to each other,
or both.
3.3
Loose lace or slight scum, or both
A rating that more than 10% but less than 50% lace or scum is covering at the
gasoline/buffer solution interface, meanwhile the lace or scum does not enter one of
the two layers.
3.4
Scum
A layer which is thicker than the film, OR a layer that adheres to the walls of the
glass cylinder, or both.
3.5
Shred
Less than 10% of fine fibers, which are connected to each other.
4 Method overview
At room temperature, put the test gasoline and phosphate buffer solution, into a clean
stoppered glass graduated cylinder.
5 Instruments
Stoppered glass graduated cylinder. 100 mL total scale, with 1 mL divisions. The
distance from the 100 mL scale line to the mouth of the measuring cylinder is (50 ~ 60)
mm.
6 Reagents
6.1 n-heptane. Meet the requirements of GB/T 11117.2 for reference fuel.
6.2 Glass cleaning solution. Non-ionic detergent cleaning solution, if necessary, use
chromic acid lotion (strong corrosiveness, harmful to health).
6.3 Distilled water.
6.4 Acetone. Analytically pure (flammable, harmful to health).
6.5 Anhydrous potassium hydrogen phosphate. Analytically pure.
7 Instrument preparation
Wash the graduated cylinder thoroughly before testing. The cleaning process is as
follows.
7.1 Rinse the graduated cylinder and stopper with hot tap water. Brush it if necessary.
It can also be cleaned by n-heptane. Then rinse with acetone and then tap water.
7.3 Fully dry the graduated cylinder whose liquid has been poured.
8 Preparation of test gasoline
8.1 Sample. Gasoline detergent tested.
8.2 Test gasoline. Base gasoline added to the sample. Prepare at least 100 mL of the test
gasoline. Put the test gasoline into a clean container.
9 Test steps
9.1 Pour 20 mL of phosphate buffer solution into a graduated cylinder at room
temperature. Record the volume, accurate to 1 mL. Then add 80 mL of test gasoline.
Apply a glass stopper.
9.3 Immediately place the graduated cylinder on a non-vibrating platform. Let it stand
for 5 min.
9.4 Without picking up the graduated cylinder, observe under natural light and make
the following records.
10 Report
The report shall contain the following.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 19230.2-2003 be delivered?Answer: The full copy PDF of English version of GB/T 19230.2-2003 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 19230.2-2003_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19230.2-2003_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 19230.2-2003 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 19230.2-2003?A step-by-step guide to download PDF of GB/T 19230.2-2003_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 19230.2-2003".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|