GB/T 18717.2-2002 PDF English
US$150.00 · In stock · Download in 9 secondsGB/T 18717.2-2002: Ergonomic design for the safety of machinery -- Part 2: Principles for determining the dimensions required for openings for access of parts of the body into machinery Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 18717.2-2002 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Ergonomic design for the safety of machinery -- Part 2: Principles for determining the dimensions required for openings for access of parts of the body into machinery
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 18717.2-2002
GB/T 18717.2-2002: Ergonomic design for the safety of machinery -- Part 2: Principles for determining the dimensions required for openings for access of parts of the body into machinery
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT18717.2-2002
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.110
J 09
Ergonomic Design for the Safety of Machinery - Part 2.
Principles for Determining the Dimensions Required for
Openings for Access of Parts of the Body into
Machinery
(ISO 15534-2. 2000, Ergonomic Design for the Safety of Machinery - Part 2.
Principles for Determining the Dimensions Required for Access Openings, NEQ)
Issued on: MAY 17, 2002
Implemented on: DECEMBER 1, 2002
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 General Requirements ... 6
4 Access Openings ... 7
Appendix A (Normative) Application of Anthropometric Data in Practice ... 14
Appendix B (Informative) Configuration of Access Openings ... 19
Appendix C (Informative) Symbols for Opening Dimensions and Anthropometric
Body Measurements ... 28
Bibliography ... 30
Foreword
GB/T 18717 Ergonomic Design for the Safety of Machinery is divided into three parts.
---Part 1. Principles for Determining the Dimensions Required for Openings for
Whole-body Access into Machinery;
---Part 2. Principles for Determining the Dimensions Required for Openings for
Access of Parts of the Body into Machinery;
---Part 3. Anthropometric Data.
This Part is the second part of GB/T 18717; it is corresponding to ISO 15534-2. 2000
Ergonomic Design for the Safety of Machinery - Part 2. Principles for Determining the
Dimensions Required for Access Openings (English version). The degree of
consistency between this Part and Part 2 in ISO 15534-2. Ergonomic Design for the
Safety of Machinery is non-equivalent. Please see the main differences below.
---The Introduction part and the involved Bibliography [3] in the previous
international standard are deleted;
---Three reference standards in the previous international standard are modified
into corresponding national standards;
---In the previous international standard, 12 of the 25 opening dimensions (unit.
mm) of B2 ~ B16 are modified.
In Figure B.4 and Figure B.14 in this Part, “≤ 1,190” is “≤ 1,220” before
modification;
In Figure B.5 in this Part, “900” is “920” before modification;
In Figure B.6 in this Part, “1,190 ~ 1,560” is “1,230 ~ 1,680” before modification;
In Figure B.8 in this Part, “1,560 ~ 1,190” is “1,560 ~ 1,230” before modification;
In Figure B.11 in this Part, “900 ~ 1,240” is “920 ~ 1,240” before modification;
“1,190 ~ 1,560” is “1,230 ~ 1,560” before modification;
In Figure B.12 in this Part, “1,190” is “1,230” before modification;
In Figure B.13 in this Part, “1,190 ~ 1,560” is “1,230 ~ 1,560” before modification;
In Figure B.15 in this Part, “900 ~ 1,230” is “920 ~ 1,230” before modification;
In Figure B.16 in this Part, “≤ 1,480” is “≤ 1,520” before modification.
---On the premise of the same conditions for the measurement of human body
Ergonomic Design for the Safety of Machinery - Part 2.
Principles for Determining the Dimensions Required
for Openings for Access of Parts of the Body into
Machinery
1 Scope
This Part specifies the minimum functional dimensions (opening dimensions, please
refer to Bibliography [2]) for 12 types of opening for access of parts of the body into
machinery (please refer to 3.1 in GB/T 15706.1-1995) and the configuration
requirements for 22 types of opening, as well as 26 formulas for the calculation of
opening dimensions, which combine anthropometric data (anthropometric
measurements) and additional space (allowances).
Please refer to Table 1 in GB/T 18717.3-2002 for anthropometric data. Please refer to
the stipulation in Appendix A for the numerical value of additional space.
Opening dimensions are based on the numerical value of the 95th percentile (please
refer to Bibliography [2]) of the expected user population, whereas reach distances are
based on the numerical value of the 5th percentile. Under each circumstance, the least
favorable body dimension of the expected user population shall be considered as the
basis. The same consideration also applies to the configuration of openings. Please
refer to Appendix B.
This Part is applicable to non-mobile machinery. In terms of mobile machinery, there
may be additional specific requirements.
Situations where people are to be prevented from reaching a hazard are elaborated in
GB 12265.1.
2 Normative References
Through the quotation in this Part of GB/T 18717, clauses in the following documents
become clauses in this Part. In terms of references with a specific date, all the
subsequent modification sheets (excluding corrected content) or revised versions are
not applicable to this Standard. However, all parties that reach an agreement in
accordance with this Standard are encouraged to explore the possibility of adopting
the latest versions of these documents. In terms of references without a specific date,
the latest versions are applicable to this Standard.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 18717.2-2002 be delivered?Answer: The full copy PDF of English version of GB/T 18717.2-2002 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 18717.2-2002_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18717.2-2002_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 18717.2-2002 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 18717.2-2002?A step-by-step guide to download PDF of GB/T 18717.2-2002_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 18717.2-2002".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|