GB/T 18476-2019 PDF English
US$199.00 · In stock · Download in 9 secondsGB/T 18476-2019: Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth (notch test) Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 18476: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 18476-2019 | English | 199 |
Add to Cart
|
3 days
|
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth (notch test)
| Valid |
| GB/T 18476-2001 | English | 319 |
Add to Cart
|
3 days
|
Polyolefin pipes for the conveyance of fluids -- Determination of resistance to crack propagation -- Test method for slow crack growth on notched pipes (notch test)
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 18476-2019
GB/T 18476-2019: Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth (notch test)
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT18476-2019
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth (notch test)
ICS 83.140.30
G33
National Standards of People's Republic of China
Replace GB/T 18476-2001
Polyolefin pipe for fluid transportation
Determination of crack propagation resistance
Test method for slow crack growth (incision test)
Polyolefinpipesfortheconveyanceoffluids-Determinationofresistanceto
crackpropagation-Testmethodforslowcrackgrowth(notchtest)
(ISO 13479.2009, Polyolefinpipesfortheconveyanceoffluids-
Determinationofresistancetocrackpropagation-
Testmethodforslowcrackgrowthonnotchedpipes, MOD)
2019-08-30 released 2020-03-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 18476-2001 "Determination of crack propagation resistance of polyolefin pipes for fluid transport.
The test method of rapid growth (incision test), compared with GB/T 18476-2001, the main technical changes are as follows.
---Modified mill milling length requirements (see 5.2,.2001 edition 4.2);
--- Increased state adjustment requirements before sample preparation (see 6.1);
--- Increase the focus of free length (see 6.2);
--- Increased dimensional measurement requirements (see 6.3);
--- Increased attention to the processing of the incision (see 6.4.2);
--- Added the requirements for measuring and recording the depth of each incision and the remaining wall thickness of the incision (see 6.4.3);
---Modified state adjustment time requirements (see Chapter 7, Chapter 6 of the.2001 edition);
--- Modified the remaining thickness of the pipe cut. dn180, SDR7.4 cut wall thickness maximum modified from 20.0mm to 20.2mm;
The maximum wall thickness of dn250 and SDR7.4 cuts was changed from 26.0mm to 28.0mm (see Appendix A,.2001 edition 5.3.1);
--- Delete the minimum damage time of PE80 and PE100 materials should not be less than 165h (see Appendix B, Appendix A of.2001 edition).
This standard uses the redrafting method to modify the ISO 13479.2009 "Determination of crack propagation resistance of polyolefin pipes for fluid transport.
Test Method for Slow Growth of Notched Pipe Cracks.
The main technical differences between this standard and ISO 13479.2009 and their reasons are as follows.
---About the normative reference documents, this standard has made technical adjustments to adapt to China's technical conditions, adjustments
The situation is reflected in Chapter 2, “Regulatory Citations”, and the specific adjustments are as follows.
● Removed ISO 161-1 and ISO 11922-1;
● Replace ISO 1167-1 and ISO 1167-2 with GB/T 6111-2018 which is not equivalent to the international standard;
● Replace ISO 6108 with GB/T 6128.2-2007 modified to adopt international standards;
● Replace ISO 3126 with GB/T 8806-2008 equivalent to the international standard;
● Added GB/T 19278-2018.
This standard has made the following editorial changes.
---Modify the standard name to the test method for determining the crack growth of the polyolefin pipe for fluid transport.
(Incision test).
Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents.
This standard was proposed by the China Light Industry Association.
This standard is under the jurisdiction of the National Plastics Standardization Technical Committee (SAC/TC48).
This standard was drafted. Asia University Group, Shandong Shengbang Plastic Co., Ltd., Guangdong Liansu Technology Industrial Co., Ltd., National Chemical Construction
Building Materials Testing Center (Material Testing Department), Zhangzhou Mingzhu Plastics Co., Ltd., China National Petroleum Corporation Petrochemical Research
Research Institute, Chengde Precision Testing Machine Co., Ltd., Shanghai Nachuan Nuclear Energy New Material Technology Co., Ltd., Light Industry Plastics Processing Application Research Institute
Home Plastics Quality Supervision and Inspection Center).
The main drafters of this standard. Li Yu, Jing Fazhen, Qiao Xiaohui, Wu Zhijun, Chi Yongsheng, Lu Xiaoying, Wang Xinhua, Feng Jian, Xu Haiyun, Li Ying.
The previous versions of the standards replaced by this standard are.
---GB/T 18476-2001.
Polyolefin pipe for fluid transportation
Determination of crack propagation resistance
Test method for slow crack growth (incision test)
1 Scope
This standard specifies the test method for determining the slow crack growth resistance of polyolefin pipes for fluid transport.
The time of failure under hydraulic conditions is indicated.
This standard applies to polyolefin pipes with a wall thickness greater than 5mm.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6111-2018 Determination of internal pressure resistance of thermoplastic piping systems for fluid transport (ISO 1167-1.2006;
ISO 1167-2.2006; ISO 1167-3.2007; ISO 1167-4.2007, NEQ)
GB/T 6128.2-2007 Angle milling cutters Part 2. Symmetric double angle milling cutters (ISO 6108. 1978, MOD)
GB/T 8806-2008 Determination of dimensions of plastic parts for plastics piping systems (ISO 3126.2005, IDT)
GB/T 19278-2018 General terms and definitions for thermoplastic pipes, fittings and valves
3 Terms and definitions
The terms and definitions defined in GB/T 19278-2018 apply to this document.
4 Principle
Four longitudinal slits are machined on the outer surface of the pipe by mechanical processing, and then the sample is immersed according to the requirements of GB/T 6111-2018
The hydrostatic test was carried out in a water bath at 80 ° C, and the failure time was recorded, and the failure time was expressed as the slow crack growth resistance of the pipe.
Note. Set according to the test parameters specified or specified in the international standards.
a) the number of samples (see 6.5);
b) test pressure (see 8.1);
c) Test time (see 8.1).
5 test equipment
5.1 Pipe hydrostatic test equipment. According to the provisions of GB/T 6111-2018.
5.2 Cutting processing equipment. For example. a milling machine with a fixture that holds the specimen horizontally.
If a mandrel is required during processing, it should be placed inside the pipe directly under the slit to support the specimen.
According to the requirements of GB/T 6128.2-2007, the milling cutter mounted on the horizontal arbor should be a V-shaped milling cutter with an angle of 60°. The milling rate is
(0.010 ± 0.002) (mm/r)/tooth (see example).
GB/T 18476-2019
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth (notch test)
ICS 83.140.30
G33
National Standards of People's Republic of China
Replace GB/T 18476-2001
Polyolefin pipe for fluid transportation
Determination of crack propagation resistance
Test method for slow crack growth (incision test)
Polyolefinpipesfortheconveyanceoffluids-Determinationofresistanceto
crackpropagation-Testmethodforslowcrackgrowth(notchtest)
(ISO 13479.2009, Polyolefinpipesfortheconveyanceoffluids-
Determinationofresistancetocrackpropagation-
Testmethodforslowcrackgrowthonnotchedpipes, MOD)
2019-08-30 released 2020-03-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 18476-2001 "Determination of crack propagation resistance of polyolefin pipes for fluid transport.
The test method of rapid growth (incision test), compared with GB/T 18476-2001, the main technical changes are as follows.
---Modified mill milling length requirements (see 5.2,.2001 edition 4.2);
--- Increased state adjustment requirements before sample preparation (see 6.1);
--- Increase the focus of free length (see 6.2);
--- Increased dimensional measurement requirements (see 6.3);
--- Increased attention to the processing of the incision (see 6.4.2);
--- Added the requirements for measuring and recording the depth of each incision and the remaining wall thickness of the incision (see 6.4.3);
---Modified state adjustment time requirements (see Chapter 7, Chapter 6 of the.2001 edition);
--- Modified the remaining thickness of the pipe cut. dn180, SDR7.4 cut wall thickness maximum modified from 20.0mm to 20.2mm;
The maximum wall thickness of dn250 and SDR7.4 cuts was changed from 26.0mm to 28.0mm (see Appendix A,.2001 edition 5.3.1);
--- Delete the minimum damage time of PE80 and PE100 materials should not be less than 165h (see Appendix B, Appendix A of.2001 edition).
This standard uses the redrafting method to modify the ISO 13479.2009 "Determination of crack propagation resistance of polyolefin pipes for fluid transport.
Test Method for Slow Growth of Notched Pipe Cracks.
The main technical differences between this standard and ISO 13479.2009 and their reasons are as follows.
---About the normative reference documents, this standard has made technical adjustments to adapt to China's technical conditions, adjustments
The situation is reflected in Chapter 2, “Regulatory Citations”, and the specific adjustments are as follows.
● Removed ISO 161-1 and ISO 11922-1;
● Replace ISO 1167-1 and ISO 1167-2 with GB/T 6111-2018 which is not equivalent to the international standard;
● Replace ISO 6108 with GB/T 6128.2-2007 modified to adopt international standards;
● Replace ISO 3126 with GB/T 8806-2008 equivalent to the international standard;
● Added GB/T 19278-2018.
This standard has made the following editorial changes.
---Modify the standard name to the test method for determining the crack growth of the polyolefin pipe for fluid transport.
(Incision test).
Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents.
This standard was proposed by the China Light Industry Association.
This standard is under the jurisdiction of the National Plastics Standardization Technical Committee (SAC/TC48).
This standard was drafted. Asia University Group, Shandong Shengbang Plastic Co., Ltd., Guangdong Liansu Technology Industrial Co., Ltd., National Chemical Construction
Building Materials Testing Center (Material Testing Department), Zhangzhou Mingzhu Plastics Co., Ltd., China National Petroleum Corporation Petrochemical Research
Research Institute, Chengde Precision Testing Machine Co., Ltd., Shanghai Nachuan Nuclear Energy New Material Technology Co., Ltd., Light Industry Plastics Processing Application Research Institute
Home Plastics Quality Supervision and Inspection Center).
The main drafters of this standard. Li Yu, Jing Fazhen, Qiao Xiaohui, Wu Zhijun, Chi Yongsheng, Lu Xiaoying, Wang Xinhua, Feng Jian, Xu Haiyun, Li Ying.
The previous versions of the standards replaced by this standard are.
---GB/T 18476-2001.
Polyolefin pipe for fluid transportation
Determination of crack propagation resistance
Test method for slow crack growth (incision test)
1 Scope
This standard specifies the test method for determining the slow crack growth resistance of polyolefin pipes for fluid transport.
The time of failure under hydraulic conditions is indicated.
This standard applies to polyolefin pipes with a wall thickness greater than 5mm.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 6111-2018 Determination of internal pressure resistance of thermoplastic piping systems for fluid transport (ISO 1167-1.2006;
ISO 1167-2.2006; ISO 1167-3.2007; ISO 1167-4.2007, NEQ)
GB/T 6128.2-2007 Angle milling cutters Part 2. Symmetric double angle milling cutters (ISO 6108. 1978, MOD)
GB/T 8806-2008 Determination of dimensions of plastic parts for plastics piping systems (ISO 3126.2005, IDT)
GB/T 19278-2018 General terms and definitions for thermoplastic pipes, fittings and valves
3 Terms and definitions
The terms and definitions defined in GB/T 19278-2018 apply to this document.
4 Principle
Four longitudinal slits are machined on the outer surface of the pipe by mechanical processing, and then the sample is immersed according to the requirements of GB/T 6111-2018
The hydrostatic test was carried out in a water bath at 80 ° C, and the failure time was recorded, and the failure time was expressed as the slow crack growth resistance of the pipe.
Note. Set according to the test parameters specified or specified in the international standards.
a) the number of samples (see 6.5);
b) test pressure (see 8.1);
c) Test time (see 8.1).
5 test equipment
5.1 Pipe hydrostatic test equipment. According to the provisions of GB/T 6111-2018.
5.2 Cutting processing equipment. For example. a milling machine with a fixture that holds the specimen horizontally.
If a mandrel is required during processing, it should be placed inside the pipe directly under the slit to support the specimen.
According to the requirements of GB/T 6128.2-2007, the milling cutter mounted on the horizontal arbor should be a V-shaped milling cutter with an angle of 60°. The milling rate is
(0.010 ± 0.002) (mm/r)/tooth (see example).
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 18476-2019 be delivered?Answer: The full copy PDF of English version of GB/T 18476-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 18476-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18476-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 18476-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 18476-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18476-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 18476-2019?A step-by-step guide to download PDF of GB/T 18476-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 18476-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|