Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169760 (Sep 18, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   Cart
  

GB/T 18442.5-2019 (GBT 18442.5-2019)

GB/T 18442.5-2019_English: PDF (GBT18442.5-2019)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)Related StandardStatusGoogle Book
GB/T 18442.5-2019English145 Add to Cart 0--10 minutes. Auto-delivered. Static vacuum insulated cryogenic pressure vessel -- Part 5: Inspection and test GB/T 18442.5-2019 Valid GB/T 18442.5-2019
 

BASIC DATA
Standard ID GB/T 18442.5-2019 (GB/T18442.5-2019)
Description (Translated English) Static vacuum insulated cryogenic pressure vessels -- Part 5: Inspection and testing
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J76
Classification of International Standard 23.020.40
Word Count Estimation 10,149
Date of Issue 2019-12-31
Date of Implementation 2019-12-31
Older Standard (superseded by this standard) GB/T 18442.5-2011
Quoted Standard GB/T 150.1; GB/T 150.2; GB/T 150.3; GB/T 150.4; GB/T 18442.1; GB/T 18442.2-2019; GB/T 18442.3-2019; GB/T 18442.4-2019; GB/T 18442.6-2019; GB/T 18443.2; GB/T 18443.3; GB/T 18443.4; GB/T 18443.5; GB/T 18443.7; GB/T 18443.8; JB/T 6896; TSG 21
Drafting Organization Zhangjiagang CIMC Suntech Low Temperature Equipment Co., Ltd.
Administrative Organization National Boiler and Pressure Vessel Standardization Technical Committee
Regulation (derived from) National Standards Bulletin No. 19 of 2019
Proposing organization National Boiler and Pressure Vessel Standardization Technical Committee (SAC / TC 262)
Issuing agency(ies) State Administration of Market Supervision and Administration, National Standardization Administration
Summary This standard specifies the test methods and inspection rules for the manufacturing process and after completion of fixed vacuum insulated cryogenic containers (hereinafter referred to as "cryogenic containers"). This section applies to cryogenic vessels that simultaneously meet the following conditions: a) the working pressure of the inner container is not less than 0.1 MPa; b) the geometric volume is not less than 1 m ^ (3); c) the insulation method is vacuum powder insulation, vacuum composite insulation or High vacuum multilayer insulation; d) The storage medium is a frozen liquefied gas with a standard boiling point of not less than -196 �� C. This section cannot be used for cryogenic containers in the following areas: a) the inner container and the shell are non-ferrous or non-metallic materials; b) spherical structure; c) stacked thermal insulation method; d) mobile; e) storage standards Freezing point below -196 ��

GB/T 18442.5-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 23.020.40
J 76
Replacing GB/T 18442.5-2011
Static vacuum insulated cryogenic pressure vessels -
Part 5: Inspection and testing
ISSUED ON: DECEMBER 31, 2019
IMPLEMENTED ON: DECEMBER 31, 2019
Issued by: State Administration for Market Regulation;
Standardization Administration of the PRC.
Table of Contents
Foreword ... 3 
1 Scope ... 5 
2 Normative references ... 5 
3 Terms and definitions ... 7 
4 Test methods ... 7 
5 Inspection rules ... 12 
Static vacuum insulated cryogenic pressure vessels -
Part 5: Inspection and testing
1 Scope
This Part of GB/T 18442 specifies the test methods and inspection rules during
and after the fabrication of static vacuum insulated cryogenic pressure vessels
(hereinafter referred to as "cryogenic vessels").
This Part applies to cryogenic vessels, which simultaneously meet the following
conditions:
a) The working pressure of the inner vessel is not less than 0.1 MPa;
b) The geometric volume is not less than 1 m3;
c) The insulation method is vacuum powder insulation, vacuum composite
insulation, or high vacuum multilayer insulation;
d) The storage medium is a refrigerated liquefied gas with a standard boiling
point of not lower than -196 °C.
This Part does not apply to cryogenic vessels in the following scope:
a) The material of inner vessel and outer jacket is non-ferrous metal or non-
metal;
b) HAVE a spherical structure;
c) Stacked insulation;
d) Mobile;
e) STORE refrigerated liquefied gas medium with standard boiling point
below -196 °C;
f) The storage medium is toxic gas according to GB 12268;
g) Those with special requirements such as national defense and military
equipment.
2 Normative references
The following documents are indispensable for the application of this document.
For the dated references, only the editions with the dates indicated are
applicable to this document. For the undated references, the latest edition
(including all the amendments) are applicable to this document.
GB/T 150 (all parts) Pressure vessels
GB/T 18442.1 Static vacuum insulated cryogenic pressure vessels - Part 1:
General requirements
GB/T 18442.2-2019 Static vacuum insulated cryogenic pressure vessels -
Part 2: Materials
GB/T 18442.3-2019 Static vacuum insulated cryogenic pressure vessels -
Part 3: Design
GB/T 18442.4-2019 Static vacuum insulated cryogenic pressure vessels -
Part 4: Fabrication
GB/T 18442.6-2019 Static vacuum insulated cryogenic pressure vessel -
Part 6: Safety device requirements
GB/T 18443.2 Testing method of performance for vacuum insulation
cryogenic equipment - Part 2: Vacuum degree measurement
GB/T 18443.3 Testing method of performance for vacuum insulation
cryogenic equipment - Part 3: Leak rate measurement
GB/T 18443.4 Testing method of performance for vacuum insulation
cryogenic equipment - Part 4: Leak-outgassing rate measurement
GB/T 18443.5 Testing method of performance for vacuum insulation
cryogenic equipment - Part 5: Static evaporation rate measurement
GB/T 18443.7 Testing method of performance for vacuum insulation
cryogenic equipment - Part 7: Holding time measurement
GB/T 18443.8 Testing method of performance for vacuum insulation
cryogenic equipment - Part 8: Volume measurement
GB/T 20801.5 Pressure piping code - Industrial piping - Part 5: Inspection
and testing
JB/T 6896 Surface cleanliness of air separation plants
TSG 21 Supervision Regulation on Safety Technology for Stationary
Pressure Vessel
4.2.1.1 Basic requirements for pressure-tight test
4.2.1.1.1 The finished inner vessel shall, according to the provisions of the
drawing, be subjected to a pressure-tight test. The pressure-tight test includes
hydraulic pressure test and air pressure test.
4.2.1.1.2 The pressure-tight test shall use two pressure gauges with the same
range and passing the verification. The range of the pressure gauge shall be
1.5 times~3.0 times the test pressure; 2 times the test pressure is appropriate.
The accuracy of the pressure gauge shall not be less than level 1.6. The dial
diameter shall not be less than 100 mm. The pressure gauge shall be installed
in a position for easy observation on the piping leading from the top of the test
inner vessel.
4.2.1.1.3 Before the pressure-tight test, the fastening bolts (if any) of the
connection locations of the inner vessel shall be fully configured and properly
tightened. The inner vessel and the annular space piping shall be subjected to
the pressure-tight test together as much as possible. During the pressure-tight
test, for the temporary pressure components welded on the inner vessel, it shall
adopt appropriate measures to ensure their strength and safety.
4.2.1.1.4 The pressure-tight test site shall have reliable safety protection
facilities; and, shall be inspected and approved by the technical director and
safety management department of the fabrication organization.
4.2.1.1.5 During the pressure holding period, continuous pressurization shall
not be used to maintain the test pressure. During the pressure-tight test, it shall
not tighten the bolts with pressure or apply external force to the pressure
components.
4.2.1.1.6 During the pressure-tight test, no work unrelated to the test shall be
carried out; irrelevant personnel shall not stay at the test site.
4.2.1.2 Hydraulic test
4.2.1.2.1 The medium of the hydraulic test is generally water. When necessary,
other test liquids, which will not cause danger, can also be used. During the test,
the temperature of the liquid shall be lower than its flash point or boiling point;
and, there are reliable safety measures.
4.2.1.2.2 The hydraulic test temperature shall comply with GB/T 150.4 and the
design drawings.
4.2.1.2.3 The hydraulic test shall meet the following requirements:
a) The top of the inner vessel shall be provided with an exhaust port. When
filling, the air in the inner vessel shall be exhausted. During the test, the
4.2.1.3.6 During the air pressure test, if there is no abnormal noise in the inner
vessel, and there are no air leak and no visible deformation checked through
liquid soap or other reliable leak detection methods, it is qualified.
4.2.2 Pressure-tight test of piping
4.2.2.1 The internal piping of the annular space and the inner vessel are
subjected to a pressure-tight test together. After the external piping passes the
nondestructive testing, the pressure-tight test shall be carried out according to
the drawing.
4.2.2.2 Pressure-tight test requirements and test procedures of piping are in
accordance with the provisions of GB/T 20801.5; and, meet the requirements
of drawings.
4.3 Air tightness test
4.3.1 After the pressure-tight test is passed, all safety accessories, instruments,
loading-unloading accessories shall be installed and subjected to the air
tightness test.
4.3.2 When conducting the air tightness test, it shall meet the following
requirements:
a) The test gas shall be dry and clean air, nitrogen, or other inert gas;
b) During the test, the pressure shall rise slowly. After the specified test
pressure is reached, the pressure shall be maintained for a long enough
time. At the same time, check all the welded joints of the tank and each
valve, instrument and its connection surface. If there is no leak, it is
qualified;
c) If there is a leak, the test shall be repeated after repairing.
4.4 Helium leak detection test
The helium leak detection test shall meet the requirements of GB/T 18443.3 or
design documents.
4.5 Cold shock test
4.5.1 Whether to do the cold shock test shall be based on the requirements of
the drawing.
4.5.2 Liquid nitrogen shall be used as the test medium for the cold shock test.
4.5.3 During the test, the other piping ports except the liquid inlet and the
exhaust port shall be closed.
The detection method of holding time is in accordance with the provisions of
GB/T 18443.7.
4.13 Test of safety accessories
The performance test of safety accessories shall comply with the provisions of
the corresponding product standards and design documents.
4.14 Other inspections
4.14.1 The inspection items after the final assembly of cryogenic vessel include
at least the following contents. The conformity requirements shall meet the
requirements of this Part and the design documents:
a) Boundary dimensions of the tank;
b) Size of the nozzle position;
c) Geometric dimensions and assembly dimensions of leg supports, bracket
supports, saddle supports, or skirts;
d) Integrity and reliability of the piping system;
e) Surface coating, mark and identification, nameplate, and necessary
warning signs, etc.
4.14.2 For cryogenic vessels, the resistance of the static conducting device
shall be measured, which can be measured using a multimeter.
4.14.3 The visual inspection method is used to check the visual quality of
cryogenic vessels.
5 Inspection rules
5.1 Inspection classification
The inspection is classified into one-by-one inspection, lot size inspection, and
type test.
5.2 One-by-one inspection
After the cryogenic vessel is completed, it shall pass the inspection one by one
before leaving the factory. The one-by-one inspection items and requirements
shall be in accordance with Table 1 and Table 2.
5.3 Lot size inspection
5.3.1 For cryogenic vessels with a geometric volume of not more than 5 m3 of