Powered by Google www.ChineseStandard.net Database: 189760 (20 Apr 2024)

GB/T 17810-2009 (GBT17810-2009)

GB/T 17810-2009_English: PDF (GBT 17810-2009, GBT17810-2009)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 17810-2009English85 Add to Cart 0--9 seconds. Auto-delivery Feed grade DL-methionine Valid GB/T 17810-2009

Standard ID GB/T 17810-2009 (GB/T17810-2009)
Description (Translated English) Feed grade DL-methionine
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard B46
Classification of International Standard 65.120
Word Count Estimation 10,139
Date of Issue 2009-05-26
Date of Implementation 2009-10-01
Older Standard (superseded by this standard) GB/T 17810-1999
Quoted Standard GB/T 601; GB/T 1250; GB/T 6682; GB 10648; GB/T 14699.1; bipartite "Chinese Pharmacopoeia" 2005 edition
Drafting Organization Feed Research Institute, Chinese Academy of Agricultural Sciences
Administrative Organization National Standardization Technical Committee Feed Industry
Regulation (derived from) National Standard Approval Announcement 2009 No.7 (Total No.147)
Proposing organization National Feed Industry Standardization Technical Committee
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This standard specifies the requirements for feed grade DL-methionine products, test methods, inspection rules, signs, packaging, storage and transport. This standard applies to methylthiopropanal, cyanide, sulfuric acid and sodium hydroxide as the main raw material of feed grade DL-methionine.

Standards related to: GB/T 17810-2009

GB/T 17810-2009
ICS 65.120
B 46
National Standard
of the People’s Republic of China
Replacing GB/T 17810-1999
Feed grade DL-methionine
饲料级 DL-蛋氨酸
ISSUED ON. MAY 26, 2009
Issued by. General Administration of Quality Supervision, Inspection and
Standardization Administration Committee.
Table of Contents
1 Scope ... 4 
2 Normative references ... 4 
3 Requirements ... 5 
4 Test methods ... 5 
5 Inspection rules ... 12 
6 Labeling, packaging, transportation, and storage ... 13 
This Standard replaces GB/T 17810-1999 "Feed grade DL-methionine".
The main technical differences between this Standard and GB/T 17810-1999
are as follows.
- REVISE GB/T 6678 in normative references to GB/T 14699.1;
- REVISE 3.1 in previous standard to "Appearance and characters - White
or light gray powder or flaky crystals. It is slightly-soluble in water. It is
extreme-slightly-soluble in ethanol. It is slightly-soluble in diluted acid and
sodium hydroxide (potassium) solutions";
- Tolerance in 4.1.5 of previous standard is adjusted from “absolute
differences of two parallel determination results shall not be greater than
0.1%” to “absolute differences of two parallel determination results shall
not be greater than 0.3%”;
- ADD the product identification methods (ion exchange chromatography);
- MODIFY the determination methods of heavy metals;
- MODIFY the arsenic determination methods;
- ADD "factory-exit inspection" and "type inspection" in inspection rules.
This Standard was proposed by and shall be centralized by National
Standardization Technical Committee of Feed Industry.
This Standard was drafted by Feed Research Institute, Chinese Academy of
Agricultural Sciences.
Main drafters of this Standard. Fan Zhiying, Liu Qingsheng, Ma Shuyu, Tian
Yuan, Shi Dongdong.
The previous version replaced by this Standard is.
- GB/T 17810-1999.
Feed grade DL-methionine
1 Scope   
This Standard specifies the requirements, test methods, inspection rules,
labeling, packaging, storage, and transportation of feed grade DL-methionine
This Standard applies to the feed grade DL-methionine that uses
methylthiopropanal, cyanide, sulfuric acid, and sodium hydroxide as main raw
Chemical name. 2-amino-4-methylthio butyric acid
Chemical formula. CH3S-CH2-CH2-CH (NH2) -COOH
Relative molecular mass. 149.2 (according to Year-2007 international relative
atomic mass)
2 Normative references   
The provisions in following documents become the provisions of this Standard
through reference in this Standard. For dated references, the subsequent
amendments (excluding corrections) or revisions do not apply to this Standard.
However, parties who reach an agreement based on this Standard are
encouraged to study if the latest versions of these documents are applicable.
For undated references, the latest edition of the referenced document applies.
GB/T 601 Chemical reagent - Preparations of standard volumetric solutions
GB/T 1250 Rules for expression and judgment of limiting values
GB/T 6682 Water for analytical laboratory use - Specification and test
GB 10648 Feed label
GB/T 14699.1 Animal Feeding Stuffs - Sampling
"Pharmacopoeia of People's Republic of China" Volume 2, Edition 2005
JⅧ , Volume 2, Edition 2005).
5 Inspection rules   
5.1 Products shall be inspected by quality inspection department of the
manufacturer. The manufacturer shall ensure that all products exiting factory
shall meet the requirements of Chapter 3 of this Standard. And accompany
with quality certificates in certain format.
5.2 The products produced and packaged by the same batch of raw materials,
by the same shift, with the same process condition, same batch number, same
specification, and same quality certificates are deemed as a batch.
5.3 The sampling bag quantity shall be executed according to the
specifications of GB/T 14699.1. When sampling, insert the sampler into the
position that is three-fourths of the depth of material layer. The obtained
samples are mixed evenly. USE quartation method to reduce the samples to
about 500 g. PACK in 2 dry, clean bottles with grinding stoppers. PASTE labels
on the bottles. INDICATE the name of manufacturer, product name, production
date, and batch. One bottle is for testing, another bottle is preserved for
5.4 Factory-exit inspection. Each batch of products shall be conducted for
factory-exit inspection when exiting the factory. The inspection items are
sensory index, loss on drying, and DL-methionine content.
5.5 Type inspection. Type inspection shall be conducted once every 6 months.
Type inspection items include all the requirements specified in Chapter 3 of
this Standard. When there is 1 of the following situations, it shall conduct type
inspection for the product quality.
a) When the production process and the main raw materials are changed;
b) When resuming production after production is shutdown for more than 3
c) When statutory inspection department proposes the requirements;
d) Contractual specification.
5.6 Judgment rules. The products of which all inspection results meet the
requirements of Chapter 3 of this Standard are judged as qualified. When there
is 1 indicator not meeting the requirements of this Standard, it shall be
re-sampled for re-inspection. It is judged as unqualified when there is 1 item in
re-inspection result not complying with this Standard.
5.7 Data processing of this Standard, according to GB/T 1250, uses rounding
value comparison method.
6 Labeling, packaging, transportation, and storage   
6.1 The content of labels shall comply with the specification of GB 10648.
6.2 The products are packaged in bags. The packaging bags are divided into 3
layers. The outer layer is polyethylene composite fabric; the middle layer is
kraft paper; and the inner layer is low-density polyethylene film or non-toxic
PVC film. It can also use other packaging that can ensure the product quality.
6.3 The products shall be prevented from rain, moisture, and sunlight during
transportation. It is strictly prohibited that transporting with toxic substances.
6.4 The products shall be stored in a dry, clean indoor warehouse. Avoid the
rain and moisture. It shall not be stored with toxic substances.
6.5 Shelf life of original packaging under specified storage conditions is 36