GB/T 1735-2009 PDF English
US$105.00 · In stock · Download in 9 secondsGB/T 1735-2009: Paints and varnishes -- Determination of heat resistance Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 1735: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 1735-2009 | English | 105 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Paints and varnishes -- Determination of heat resistance
| Valid |
| GB/T 1735-1979 | English | RFQ |
ASK
|
3 days
|
Method of test for heat resistance of paint films
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 1735-2009
GB/T 1735-2009: Paints and varnishes -- Determination of heat resistance---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT1735-2009
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 87.040
G 50
Replacing GB/T 1735-1979
Paints and varnishes - Determination of heat resistance
(ISO 3248:1998, Paints and varnishes - Determination of the effect of heat, MOD)
ISSUED ON: JUNE 02, 2009
IMPLEMENTED ON: FEBRUARY 01, 2010
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Supplementary information needed ... 6
4 Sampling ... 6
5 Test panel ... 6
6 Operation steps ... 7
7 Test report ... 7
Annex A (normative) Supplementary information needed ... 9
Annex B (informative) The technical differences between this Standard and ISO
3248:1998 and their reasons ... 10
Paints and varnishes - Determination of heat resistance
1 Scope
This Standard is one of a series of standards for sampling and testing of paints, varnishes
and related products.
This Standard specifies a general method to determine the changes in the color and
gloss of the coating film of a single coating or a composite coating system of a paint,
varnish or related products at a specified temperature, the properties of blistering,
cracking or peeling from substrates.
2 Normative references
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments (excluding
corrigendum) or revisions do not apply to this Standard, however, parties who reach an
agreement based on this Standard are encouraged to study if the latest versions of these
documents are applicable. For undated references, the latest edition of the referenced
document applies.
GB/T 3186, Paints, varnishes and raw materials for paints and varnishes - Sampling
(GB/T 3186-2006, ISO 15528:2000, IDT)
GB/T 6742, Paints and varnishes - Bend test (cylindrical mandrel) (GB/T 6742-
2007, ISO 1519:2002, IDT)
GB/T 9271, Paints and varnishes standard panels for testing (GB/T 9271-2008, ISO
1514:2004, MOD)
GB/T 9279, Paints and varnishes - Scratch test (GB/T 9279-2007, ISO 1518:1992,
IDT)
GB/T 9753, Paints and varnishes - Cupping test (GB/T 9753-2007, ISO 1520:2006,
IDT)
GB/T 13452.2, Paints and varnishes - Determination of film thickness (GB/T
13452.2-2008, ISO 2808:2007, IDT)
GB/T 20624.1, Paints and varnishes - Rapid-deformation (impact resistance) tests -
Part 1: Falling-weight test, large-area indenter (GB/T 20624.1-2006, ISO 6272-
1:2002, IDT)
in μm.
6 Operation steps
6.1 Test temperature and time
The test is carried out at a specified or agreed temperature and time.
6.2 Determination
Put the three test panels into a blast oven or high temperature furnace at the specified
temperature. If the test is carried out in an oven, the distance between the test panel and
each side of the oven shall not be less than 100mm. The space between the test panels
is not less than 20mm. If the test is carried out in a high temperature furnace, try to
place the test panel in the middle of the high temperature furnace. Place the test panel
at the specified temperature for the specified time. The best way to ensure that the
painted panels are evenly heated is to hang the panels with fine wire. It is also possible
to place the test panel on a panel holder that is made of a suitable heat resistant material
or place the panel painted side up on a panel made of heat resistant material on a
support.
After the specified time, the panel is removed from the oven or high temperature
furnace and allowed to cool to room temperature. Check the panels and compare with
unheated panels prepared under the same conditions. Check whether the color of the
coating film has changed or whether there is any other damage to the coating film. Take
at least two test panels as the same phenomenon as the test result.
NOTE: By agreement, the test panel can also be placed in a blast oven or high temperature furnace
and heated to the specified temperature with it and start timing. After the specified time, turn off the
blast oven or high temperature furnace. Allow the test panel to cool to room temperature together
with it and then take it out for observation. If so, note it in the report.
If specified, in not less than 16h after the end of the heating time, the heated and
unheated test panels are tested according to a test method specified in GB/T 6742, GB/T
9279, GB/T 9753, GB/T 20624.1 or GB/T 20624.2, or by other agreed test methods.
Check the compliance with specified requirements.
7 Test report
The test report shall include at least the following:
a) All details necessary to identify the product under test;
b) Indicate the standard number (GB/T 1735);
Annex A
(normative)
Supplementary information needed
For this method to work properly, supplementary information on the items listed in this
appendix shall be provided as appropriate.
The required information is best agreed upon by the parties concerned. It may be taken
in whole or in part from international standards, national standards or other documents
related to the product under test.
a) The nature, thickness and surface treatment of the substrate.
b) The method by which the test product is applied to the substrate, including drying
conditions and times between coats in a multicoat system.
c) The time and conditions for coating drying (or baking) and curing (if applicable)
prior to testing.
d) The thickness of the dry coating (in μm) and the measurement method specified
in GB/T 13452.2 and whether it is a single coating or a multi-coating system.
e) The properties of the tested coating to be considered when evaluating the thermal
resistance of the coating.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 1735-2009 be delivered?Answer: The full copy PDF of English version of GB/T 1735-2009 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 1735-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1735-2009_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 1735-2009 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 1735-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1735-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 1735-2009?A step-by-step guide to download PDF of GB/T 1735-2009_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 1735-2009".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|