GB/T 17105-2024_English: PDF (GB/T17105-2024)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17105-2024 | English | 199 |
Add to Cart
|
3 days [Need to translate]
|
Classification of aluminum-silicon dense shaped refractory products
| Valid |
GB/T 17105-2024
|
| GB/T 17105-2008 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Classification of dense shaped refractory products -- Alumina-silica
| Obsolete |
GB/T 17105-2008
|
| GB/T 17105-1997 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Classification of dense shaped refractory products
| Obsolete |
GB/T 17105-1997
|
| Standard ID | GB/T 17105-2024 (GB/T17105-2024) | | Description (Translated English) | Classification of aluminum-silicon dense shaped refractory products | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q40 | | Classification of International Standard | 81.080 | | Word Count Estimation | 10,175 | | Date of Issue | 2024-05-28 | | Date of Implementation | 2024-12-01 | | Drafting Organization | MCC Testing and Certification Co., Ltd., Beijing University of Science and Technology, MCC Huatian Engineering Technology Co., Ltd., Yunnan Punai Kun Steel High Temperature Materials Co., Ltd., MCC General Research Institute of Building Co., Ltd., Metallurgical Industry Information Standards Research Institute, Shanxi Yuxian Xixiaoping Refractory Materials Co., Ltd., Jiyuan Refractory Furnace Industry Co., Ltd. | | Administrative Organization | National Technical Committee for Standardization of Refractory Materials (SAC/TC 193) | | Proposing organization | National Technical Committee for Standardization of Refractory Materials (SAC/TC 193) | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration | | Standard ID | GB/T 17105-2008 (GB/T17105-2008) | | Description (Translated English) | Classification of dense shaped refractory products. Alumina-silica | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q40 | | Classification of International Standard | 81.080 | | Word Count Estimation | 6,649 | | Date of Issue | 2008-05-08 | | Date of Implementation | 2008-11-01 | | Older Standard (superseded by this standard) | GB/T 17105-1997 | | Quoted Standard | GB/T 6900; GB/T 6901 | | Adopted Standard | ISO 10081-1-2003, MOD | | Drafting Organization | Metallurgical Industry Information Standards Institute | | Administrative Organization | National Standardization Technical Committee refractories | | Regulation (derived from) | National Standard Approval Announcement 2008 No.7 (Total No.120) | | Proposing organization | National Standardization Technical Committee Refractories | | Issuing agency(ies) | Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China | | Summary | This standard specifies the LAS dense shaped refractory products classification and nomenclature. This standard does not apply to the following categories of products: a) In addition to aluminum, silicon oxide, iron oxide, other metal oxide content greater than 5% of the products, b) carbon content, carbide, nitrides, nitrogen oxides and Its synthetic material mass fraction greater than 1% of the products. | | Standard ID | GB/T 17105-1997 (GB/T17105-1997) | | Description (Translated English) | Classification of dense shaped refractory products | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q40 | | Classification of International Standard | 81.08 | | Word Count Estimation | 4,462 | | Date of Issue | 1997/11/11 | | Date of Implementation | 1998/5/1 | | Adopted Standard | ISO 1109-1975, MOD | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 7 of 2008 (No. 120 overall) | | Proposing organization | Ministry of Metallurgical Industry | | Issuing agency(ies) | State Bureau of Technical Supervision |
GB/T 17105-2024: Classification of aluminum-silicon dense shaped refractory products
ICS 81:080
CCSQ40
National Standards of People's Republic of China
Replace GB/T 17105-2008
Classification of Aluminum-Silicon Dense Shaped Refractory Products
Part 1: Alumina-silica, MOD)
Released on 2024-05-28
2024-12-01 implementation
State Administration for Market Regulation
The National Standardization Administration issued
Preface
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents"
Drafting:
This document replaces GB/T 17105-2008 "Classification of Aluminum-Silicon System Dense Shaped Refractory Products": Compared with GB/T 17105-2008,
In addition to structural adjustments and editorial changes, the main technical changes are as follows:
a) Added terms and definitions (see Chapter 3);
b) The classification basis, product types and groups, raw material types, raw material characteristics, names and descriptions of combination forms have been changed (see Chapter 4,
Chapter 3 of the:2008 edition);
c) The chemical analysis requirements have been changed (see 4:2, 3:2 of the:2008 edition);
d) The description of nomenclature has been changed (see Chapter 5, Chapter 4 of the:2008 edition):
This document is modified to adopt ISO 10081-1:2003 "Classification of dense shaped refractory products Part 1: Aluminium-silicon series":
This document has made the following structural adjustments compared to ISO 10081-1:2003:
--- Added Chapter 2 "Normative References";
--- Added Chapter 3 "Terms and Definitions";
---4:2 corresponds to 2:2 and 2:3 in ISO 10081-1:2003:
The technical differences between this document and ISO 10081-1:2003 and their reasons are as follows:
--- Added normative references to GB/T 18930 in Chapter 3;
---4:1a) corresponds to 2:1a) and 2:1b) in ISO 10081-1:2003, making the content more coherent;
---4:2 adds applicable national standards GB/T 6900, GB/T 6901, GB/T 21114 to improve operability and adapt to our
Technical conditions of the country;
--- Changed the definition of ceramic bonding in 4:5a) to match the definition of "ceramic bonding" in ISO 836:2001 (GB/T 18930-2020)
Unite:
The following editorial changes were made to this document:
--- To coordinate with the existing standards, the name of the standard is changed to "Classification of Aluminum-Silicon Dense Shaped Refractory Products":
Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents:
This document is proposed and coordinated by the National Technical Committee for Standardization of Refractory Materials (SAC/TC193):
This document was drafted by: MCC Testing and Certification Co:, Ltd:, Beijing University of Science and Technology, MCC Huatian Engineering Technology Co:, Ltd:, Yunnan Punaikun
Steel High Temperature Materials Co:, Ltd:, MCC Building Research Institute Co:, Ltd:, Metallurgical Industry Information Standards Research Institute, Shanxi Yuxian Xixiaoping Refractory Materials
Materials Co:, Ltd:, Jiyuan Refractory Furnace Industry Co:, Ltd:
The main drafters of this document are: Zhang Xiuhua, Xue Qingbin, Li Yong, Zhang Wenwen, Hui Fumei, Wang Xiaoyuan, Ma Chenhong, Qian Yu, Qin Yinjun, Peng Nai,
Huang Bo, Yang Jing, Wu Huijing, Fan Yonglian, Hu Hao, and Liu Ying:
This document was first issued in:1997, revised for the first time in:2008, and this is the second revision:
Classification of Aluminum-Silicon Dense Shaped Refractory Products
1 Scope
This document specifies the classification and nomenclature of aluminum-silicon dense shaped refractory products:
This document is applicable to aluminum-silicon dense shaped refractory products:
This document does not apply to the following products:
a) Products with a mass fraction of other metal oxides greater than 5%, except for aluminum oxide, silicon oxide and iron oxide;
b) Products with a mass fraction of carbon, carbides, nitrides, nitrogen oxides and related materials greater than 1%:
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document:
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document:
GB/T 6900 Chemical analysis methods for aluminum-silicon refractories
GB/T 6901 Chemical analysis methods for siliceous refractories
GB/T 18930 Terminology of Refractory Materials
GB/T 21114 X-ray fluorescence spectrochemical analysis of refractory materials - Fused glass disc method
3 Terms and definitions
The terms and definitions defined in GB/T 18930 apply to this document:
4 Categories
4:1 Classification basis
Aluminum-silicon dense shaped refractory products should be classified according to the following four criteria:
a) Product types and groups;
b) Type of raw materials;
c) raw material characteristics;
d) Combined form (including all post-processing):
4:2 Product types and groups
The following general symbols are used to indicate the types of products:
a) High Alumina (HA);
b) clay (FC);
c) Low-alumina clay, semi-siliceous (LF);
d) silicate (SS);
e) Silica (SL):
......
GB/T 17105-2008
Classification of dense shaped refractory products. Alumina-silica
ICS 81.080
Q40
National Standards of People's Republic of China
Replacing GB/T 17105-1997
LAS dense shaped refractory products Classification
(ISO 10081-1.2003, Classificationofdenseshapedrefractoryproducts
-Part 1. Alumina-silica, MOD)
Posted 2008-05-08
2008-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This revised standard adopts ISO 10081-1.2003 "Classification of dense shaped refractory products - Part 1. LAS" (in English).
This standard and ISO 10081-2.2003 compared to the main differences are as follows.
--- Increasing the normative references;
--- 3.6 in ceramic bond definitions and terminology standards ISO 836.2001 (ie, GB/T 18930-2002) unity.
This standard replaces GB/T 17105-1997 "Classification of dense shaped refractory products", compare with the following changes.
--- Standard name changed to "LAS dense shaped refractory products - Classification";
--- Range, the classification of all dense shaped article submissions for the Al-Si refractory products - Classification;
--- Classification, remove the alkaline refractory products and special refractory products;
--- Added named chapter.
This standard by the National Standardization Technical Committee Refractories and centralized.
This standard was drafted. Metallurgical Industry Information Standards Institute, China Metallurgical Group, Wuhan Ye Jian Technology Co., Ltd., Wuhan PAREXEL industrial
Furnace company, China Metallurgical Construction Group Research Institute, Shanxi small West Ping Refractories.
The main drafters of this standard. Gao Jianping, Xie Zhaohui Cai founder, Mei Minghua, Hao Liangjun, Fang Changrong.
This standard replaces the standards previously issued as follows.
GB/T 17105-1997.
LAS dense shaped refractory products Classification
1 Scope
This standard specifies the LAS dense shaped refractory products - Classification and nomenclature.
This standard does not apply to the following products for classification.
a) addition of alumina, silica, iron oxide, other metal oxides in a concentration above 5% of the product;
b) the carbon, carbides, nitrides, nitrogen oxides and synthetic material mass fraction greater than 1 percent of the product.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 6900 LAS Chemical analysis of refractories
GB/T 6901 Chemical analysis of refractories
Category 3
3.1 Sort
LAS dense shaped refractory products classified according to the following five conditions.
a) type of product;
b) according to the content of aluminum oxide or silicon oxide grouping;
c) the main raw material;
d) raw state;
e) combining form (including all post-processing).
3.2 Products Category
Classification of dense shaped refractory products Al-Si and symbols.
a) high alumina (HA);
b) clayey (FC);
c) low aluminum clay, semi-siliceous (LF);
d) silica (the SS);
e) silica (SL).
Note. The above symbols from the abbreviation of the English name of refractory products.
Types of products the chemical composition of Table 1 classification. High alumina, the chemical composition of clay, low aluminum clay (half siliceous) analysis of refractory products
According to GB/T 6900 carried out the chemical composition of silica and silica refractory products analyzed by GB/T 6901 carried out.
3.3 Packet
LAS dense shaped refractory products based on aluminum oxide and/or silicon oxide content in the range of grouping shown in Table 1.
3.4 types of raw materials
By using the classification of raw materials.
--- One of the main raw material [mass fraction is greater than an amount equal to 50%];
--- Two main raw material [the amount of each fraction is less than 50% by mass].
Examples are as follows.
--- Corundum;
......
|