|
US$834.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16857.10-2022: Geometrical product specifications(GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 16857.10-2022 | English | 834 |
Add to Cart
|
7 days [Need to translate]
|
Geometrical product specifications(GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers
| Valid |
GB/T 16857.10-2022
|
PDF similar to GB/T 16857.10-2022
Basic data | Standard ID | GB/T 16857.10-2022 (GB/T16857.10-2022) | | Description (Translated English) | Geometrical product specifications(GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J42 | | Classification of International Standard | 17.040.30 | | Word Count Estimation | 46,424 | | Date of Issue | 2022-12-30 | | Date of Implementation | 2023-04-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 16857.10-2022: Geometrical product specifications(GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 17.040.30
CCSJ42
National Standards of People's Republic of China
Product Geometry Specification (GPS)
Coordinate Measurement System (CMS) acceptance testing and re-inspection testing
Part 10.Laser Tracker
Part 10.Lasertrackers
(ISO 10360-10.2021, IDT)
Posted on 2022-12-30
2023-04-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 symbols 5
5 Rated operating conditions 6
6 Acceptance testing and re-inspection testing 7
7 Qualification judgment 14
8 Applications 14
9 Optional expression symbols 15
Appendix A (Informative) Form 17
Appendix B (Normative) Reference detection length 20
Appendix C (Normative) Workpiece Thermal Compensation 22
Appendix D (informative) MPE specification 23
Appendix E (informative) period check 26
Appendix F (Normative) SRC Combined Sensor Test 32
Appendix G (Normative) ODR Combined Sensor Test 35
Appendix H (Informative) Relationship with GPS Matrix Model 38
Reference 39
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document is GB/T 16857 "Geometric Product Specification (GPS) Coordinate Measurement System (CMS) Acceptance Test and Re-inspection Test"
Part 10 of. GB/T 16857 has issued the following parts.
--- Part 1.Vocabulary;
--- Part 2.Coordinate measuring machines for measuring linear dimensions;
--- Part 3.Coordinate measuring machine with the axis of the turntable as the fourth axis;
--- Part 4.Coordinate measuring machines used in scanning mode;
--- Part 5.Coordinate measuring machines using single-probe or multi-probe tactile probing systems;
--- Part 6.Evaluation of errors in calculating Gaussian fitting elements;
--- Part 7.Coordinate measuring machine equipped with image detection system;
--- Part 8.Coordinate measuring machines using optical distance sensors;
--- Part 9.Coordinate measuring machines equipped with multiple detection systems;
--- Part 901.Coordinate measuring machines equipped with multi-image detection systems;
--- Part 10.Laser tracker;
--- Part 12.Articulated arm coordinate measuring machine.
This document is equivalent to ISO 10360-10.2021 "Geometric Product Specification (GPS) Coordinate Measuring System (CMS) Acceptance Inspection
Inspection and re-inspection inspection Part 10.Laser tracker".
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed and managed by the National Product Geometric Technical Specification Standardization Technical Committee (SAC/TC240).
This document is drafted by. Pan Asia Automotive Technology Center Co., Ltd., Suzhou Institute of Metrology and Testing, China Machine Productivity Promotion Center Co., Ltd.,
Shanghai University, Aipei Intelligent Equipment Co., Ltd., Hexagon Manufacturing Intelligent Technology (Qingdao) Co., Ltd., Shenzhen Zhongtu Instrument Co., Ltd.
Co., Ltd., China Machine Research Institute of Standard Technology (Beijing) Co., Ltd., Suzhou Huaxing Yuanchuang Technology Co., Ltd.
The main drafters of this document. Hu Min, Wang Yunxiang, Ming Cuixin, Niu Xiaoxu, Li Ming, Sui Zhanjiang, Tian Keping, Hu Kunpeng, Zhang Hejun, Zhu Yue,
Jiang Bin, Han Chuanyun.
Introduction
Aiming at the key issues such as the lack of acceptance testing and re-inspection testing standards of coordinate measuring machines, and the urgent demand for corresponding testing standards, the focus of research
Acceptance testing and re-inspection testing methods of coordinate measuring machines, qualification judgment rules, application of acceptance testing and re-inspection testing, formulate conforming product
National standard for acceptance testing and re-inspection testing of Coordinate Measuring System (CMS) for Geometric Specifications (GPS).
GB/T 16857 "Geometric Product Specification (GPS) Coordinate Measurement System (CMS) Acceptance Test and Re-inspection Test" is based on the product
Geometry Specification (GPS) system, using coordinate measurement technology, sensor technology and error theory, etc., through theoretical analysis, international standard research
Recommended national standards for acceptance testing and re-inspection testing of coordinate measuring machines formulated through research, measurement application practice experience summary, etc.
The formulation of GB/T 16857 can fill in the gaps in my country's coordinate measuring machine acceptance testing and re-inspection testing standards, and contribute to the development of relevant coordinate measuring machines.
The manufacturer unifies the detection method, improves the consistency and stability of the performance of the coordinate measuring machine at the factory, and provides a basis for the acceptance detection and re-inspection of the coordinate measuring machine.
provide strong technical support.
GB/T 16857 is proposed to consist of 14 parts.
--- Part 1.Vocabulary. The purpose is to define a vocabulary for coordinate measuring machines and their acceptance and re-inspection tests.
--- Part 2.Coordinate measuring machines for measuring linear dimensions. The purpose is to specify coordinate measuring machines for measuring linear dimensions,
The verification method of acceptance testing according to the characteristic indicators given by the manufacturer, and the user's periodic re-inspection of the measuring machine
verification method.
--- Part 3.Coordinate measuring machine configured with the axis of the turntable as the fourth axis. The purpose is to specify to verify a specified by the manufacturer
Acceptance testing specifications for the performance of the four-axis coordinate measuring machine, and the re-inspection for the user to periodically re-verify the performance of the four-axis coordinate measuring machine
Inspection specification.
--- Part 4.Coordinate measuring machine used in scanning mode. The purpose is to specify the coordinate measuring machine used in scan mode
Performance acceptance testing and re-inspection testing.
--- Part 5.Coordinate measuring machines using single-probe or multi-probe tactile probing systems. The purpose is to specify the
Methods for acceptance testing and re-inspection testing of coordinate measuring machine characteristics for measurement systems.
--- Part 6.Evaluation of the error of calculating Gaussian fitting elements. The purpose of this document is to specify a method for testing software that is used for sitting
The standard measure calculates the fitted features.
--- Part 7.Coordinate measuring machine with image detection system. The purpose is to specify the verification of coordinate measuring machines used to measure dimensions
Acceptance testing methods to determine whether it meets the performance specified by the manufacturer, and the user regularly verifies the performance of the coordinate measuring machine
capable retesting methods.
--- Part 8.Coordinate measuring machines using optical distance sensors. The purpose is to specify the parameters specified by the CMM manufacturer or user
The specified performance requirements, the acceptance test method for verifying the coordinate measuring machine according to the characteristic indicators given by the manufacturer, and the user regularly verifying the position
The application of re-inspection testing methods, qualification judgment rules, acceptance testing and re-inspection testing for standard measuring machine performance.
--- Part 9.Coordinate measuring machine configured with multiple detection systems. The purpose is to provide for multiple probes equipped with contact/non-contact measurement modes.
The detection method of the coordinate measuring machine of the measurement system.
--- Part 901.Coordinate measuring machine with multi-image detection system. The purpose is to specify the location of the multi-image detection system
Method for acceptance testing and re-inspection testing of marking measuring machines.
--- Part 10.Laser tracker. The purpose is to specify the acceptance test specifications for the performance of the laser tracker and the user's periodic re-verification incentives.
Re-inspection test specification for optical tracker performance.
--- Part 11.Industrial CT. The purpose is to specify the principle of X-ray computed tomography (CT) based on X-ray attenuation
Inspection methods and metrological characteristics of coordinate measuring systems (CMS) for dimensional measurement of technical components as a single sensor.
--- Part 12.Articulated arm coordinate measuring machine. The purpose is to specify the acceptance testing and review of the performance of articulated arm coordinate measuring machines
detection.
--- Part 13.Optical three-dimensional coordinate measuring machine. The purpose is to specify the acceptance testing and re-inspection of the performance of optical three-dimensional coordinate measuring machines
detection.
Product Geometry Specification (GPS)
Coordinate Measurement System (CMS) acceptance testing and re-inspection testing
Part 10.Laser Tracker
1 Scope
This document specifies the acceptance test specifications for verifying the performance of laser trackers as specified by the manufacturer by measuring the reference detection length;
It also stipulates the re-inspection testing specifications for the user to periodically re-verify the performance of the laser tracker.
The acceptance tests and re-inspection tests specified in this document are applicable to detection systems that are reflective targets or reflective targets with probe/optical range sensors.
combined laser tracker. The acceptance tests and re-inspection tests specified in this document may also apply to.
--- Laser tracker measured by interferometer (IFM) and absolute distance meter (ADM) separately or simultaneously;
--- Related performance testing of other spherical coordinate measurement systems using cooperative targets, such as lidar systems using cooperative targets.
Note. For systems that do not track targets, such as lidar systems that do not use cooperative targets, the detection performance is not tested.
This document does not expressly apply to measurement systems that do not use a spherical coordinate system, but relevant parties can negotiate to apply this document to such systems.
This document specifies.
--- Performance requirements can be specified by the manufacturer or user of the laser tracker;
--- The execution mode of the acceptance test and re-inspection test used to prove the specified requirements;
---Conformity determination rules;
---Application of acceptance testing and re-inspection testing.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document.
GB/T 16857.8-2022 Product Geometric Specifications (GPS) Coordinate Measurement System (CMS) Acceptance Test and Re-inspection Test
Part 8.Coordinate measuring machines using optical distance sensors (ISO 10360-8.2013, IDT)
GB/T 16857.9-2022 Product Geometric Specifications (GPS) Coordinate Measurement System (CMS) Acceptance Test and Re-inspection Test
Part 9.Coordinate measuring machines equipped with multiple probing systems (ISO 10360-9.2013, IDT)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
laser tracker lasertracker
A coordinate measurement system that tracks a cooperative target by a laser beam and determines its position by distance (polar radius) and two angles.
Note 1.The two angles are called the horizontal angle θ (the rotation around the vertical axis, that is, the vertical axis of the laser tracker) and the vertical angle φ (the angle with the horizontal plane, the horizontal plane is vertical
on the vertical axis) or zenith angle (angle to the vertical axis).
Note 2.Since there are different conventions, the symbols related to the spherical coordinate system are used with caution. For example, the description of the spherical coordinate system in ISO 80000-2 uses different
Notation, using zenith angle (angle from vertical) instead of vertical angle as used in this document.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16857.10-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 16857.10-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 16857.10-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16857.10-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|