|
US$669.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16675.1-2012: Technical drawings -- Simplified representation -- Part 1: Pictorial presentation
Status: Valid GB/T 16675.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 16675.1-2012 | English | 669 |
Add to Cart
|
5 days [Need to translate]
|
Technical drawings -- Simplified representation -- Part 1: Pictorial presentation
| Valid |
GB/T 16675.1-2012
|
| GB/T 16675.1-1996 | English | RFQ |
ASK
|
6 days [Need to translate]
|
Technical drawings--Simplified representation--Part 1: Pictorial presentation
| Obsolete |
GB/T 16675.1-1996
|
PDF similar to GB/T 16675.1-2012
Basic data | Standard ID | GB/T 16675.1-2012 (GB/T16675.1-2012) | | Description (Translated English) | Technical drawings -- Simplified representation -- Part 1: Pictorial presentation | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J04 | | Classification of International Standard | 01.100 | | Word Count Estimation | 29,218 | | Older Standard (superseded by this standard) | GB/T 16675.1-1996 | | Quoted Standard | GB/T 4460; GB/T 4728.10; GB/T 4728.11; GB/T 4728.1; GB/T 4728.12; GB/T 4728.13; GB/T 4728.2; GB/T 4728.3; GB/T 4728.4; GB/T 4728.5; GB/T 4728.6; GB/T 4728.7; GB/T 4728.8; GB/T 4728.9; GB/T 13361 | | Regulation (derived from) | National Standards Bulletin No. 9 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the technical drawings (mechanical, electrical, construction and civil engineering, etc.) used in the general simplified. This section applies to drawn by hand or computer technical drawings and related technical documentation. | GB/T 16675.1-2012: Technical drawings -- Simplified representation -- Part 1: Pictorial presentation
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical drawings Simplified representation Part 1. Pictorial presentation
ICS 01.100
J04
National Standards of People's Republic of China
Replacing GB/T 16675.1-1996
Technical drawings - Simplified representation
Part 1. - Drawing
Part 1. Pictorialpresentation
Issued on. 2012-05-11
2012-12-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 16675 "Technical drawings - Simplified representation" is divided into two parts.
--- Part 1. - Drawing;
--- Part 2. Dimensioning.
This section GB/T 16675 Part 1.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 16675.1-1996 "Technical drawings - Simplified representation - Part 1. Representation of Drawings."
This portion of the GB/T 16675.1-1996 compared to the main technical changes are as follows.
--- Increasing the foreword;
--- Remove the normative references in the "GB 4457.4-1984, GB 4457.5-1984, GB 4458.1-1984,
GB 4458.4-1984, GB 5489-1985, GB 11943-1989, GB/T 16675.2-1996, GB J1-1986 ";
--- The title "term" to "Terms and Definitions" and change the content of "GB/T 13361 and the following definition of terms and definitions appropriate
Used in this document ";
--- 4.2.5 adds "For the structure has been clearly expressed, can be simplified as shown in Figure 5," and add "5";
--- Delete the original standard 5.2 Table 1 legend;
--- Modify the original standard table legend 1 5.3;
--- Delete the original standard table in section 5.5 of the legend 1;
--- Modify the original standard table shows the 1 to 5.8 "and the projection plane tilt angle is less than or equal to 30 ° circle or arc, hand drawings
, Its projection can be used instead of a circle or arc ";
--- Combined the original standard in Table 1 5.9 and 5.10 of the legend;
--- Delete the original standard 5.15 Table 1. Legend;
--- Modify the original standard of 5.19 Table 1 legend;
--- Modify the original standard table description 1 Legend 5.29 "thin line" to "thick solid line";
--- Increased 5.27 Table 1 legend, illustrated as "a cross-sectional view of the assembly in the figure, the coil spring is only shown the end surface thereof, is spring
Block structure generally do not draw. "
--- Modify the original standard of 5.26 Table 1 legend.
This part of the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points.
This section is drafted. Productivity Promotion Center in the machine, universal money flows, Ltd., Hefei Kaibang Motor Co., Ltd., Jiangsu
Teachers College, the Shaanxi Provincial Institute of Standardization, Hefei University of Technology.
The main drafters of this section. thanks to Yang, Li Tingting, Zhang Xiaojun, Wang Huaide, Hou Segovia, Li Xue Jing, Zhang Jie, Li Rong.
This part of the standard replaces the previous editions are.
--- GB/T 16675.1-1996.
Technical drawings - Simplified representation
Part 1. - Drawing
1 Scope
GB/T 16675 This section provides technical drawings (mechanical, electrical, building and civil engineering, etc.) used in general simplified.
This section applies to technical drawings and related technical documents by hand or computer drawn.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 4460 Mechanical drawings running sketch symbols
GB/T 4728 (all parts), Graphical symbols for electrical diagrams
GB/T 13361 Technical Drawing generic term
3 Terms and Definitions
GB/T 13361 and defined by the following terms and definitions apply to this document.
3.1
Simplified representation simplifiedrepresentation
The essential elements of the main structure and geometrical parameters proportional representation graphical methods may be used alone symbols, letters or words express.
Simplified representation by a simplified drawing and simplify the composition of injection method.
3.2
Provisions notation conventionalrepresentation
Projection requirements or rules according to the standard requirements for graphics approach.
3.3
Schematic representation schematicrepresentation
Words, mark, or in compliance, not to scale (also proportional) represents a complete graphical information.
3.4
Notation symbolicrepresentation
Graphical representation of a specific structure or function of the information symbol not to scale (also pro rata).
4 General
4.1 Principles simplified
4.1.1 simplifying must ensure that does not cause misunderstanding and no understanding of ambiguity. In this context, we should strive drawing simple.
4.1.2 easy to read and draw, focus on simplifying the combined effect.
4.1.3 In considering ease of hand drawing and computer graphics, we must also consider microform cartographic requirements.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16675.1-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 16675.1-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 16675.1-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16675.1-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 16675.1-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16675.1-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|