GB/T 16643-2015 PDF English
US$70.00 · In stock · Download in 9 secondsGB/T 16643-2015: Rolling bearings -- Combined needle roller thrust roller bearings -- Boundary dimensions Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 16643: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 16643-2015 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Rolling bearings -- Combined needle roller thrust roller bearings -- Boundary dimensions
| Valid |
| GB/T 16643-1996 | English | 279 |
Add to Cart
|
3 days
|
Rolling bearings--Combined needle roller thrust roller bearings--Boundary dimensions
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 16643-2015
GB/T 16643-2015: Rolling bearings -- Combined needle roller thrust roller bearings -- Boundary dimensions
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT16643-2015
GB
NATIONAL STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 21.100.20
J 11
Replacing GB/T 16643-1996
Rolling bearings - Combined needle roller
thrust roller bearings - Boundary dimensions
滚动轴承
外形尺寸
Issued on: FEBRUARY 04, 2015
Implemented on: OCTOBER 01, 2015
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Symbols... 4
5 Structural type ... 5
6 Code ... 6
7 Marking example ... 7
8 Boundary dimensions ... 7
Appendix A (Normative) Inner ring boundary dimensions ... 9
Foreword
This standard was drafted in accordance with the rules given in GB/T
1.1-2009.
This standard replaces GB/T 16643-1996 “Rolling bearings - Combined needle
roller thrust roller bearings - Boundary dimensions”. As compared with GB/T
16643-1996, the main technical changes of this standard are as follows.
- ADD the “Terms and definitions” (SEE Chapter 3);
- MODIFY the definition of some symbols (SEE Chapter 4; Chapter 2 of
1996 version);
- ADD the “Code” (SEE Chapter 6);
- In the boundary dimensions table, ADD the corresponding inner ring model
(SEE Table 2; Table 2 of 1996 version).
This standard was proposed by the China Machinery Industry Federation.
The standard shall be under the jurisdiction of the National Rolling Bearing
Standardization Technical Committee (SAC/TC 98).
The drafting organizations of this standard. Luoyang Bearing Research
Institute Co., Ltd., Suzhou Bearing Factory Co., Ltd.
The main drafters of this standard. Song Yucong, Zhang Hai, Ye Jianuo.
This Standard replaces the standard previously issued as follows.
- GB/T 16643-1996.
Rolling bearings - Combined needle roller
thrust roller bearings - Boundary dimensions
1 Scope
This standard specifies the boundary dimensions of the combined needle roller
thrust roller bearings (hereinafter referred to as combined bearings).
This standard applies to the design and selection of combined bearings.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this Standard.
GB/T 272-1993 Rolling bearing - Identification code
GB/T 274-2000 Rolling bearing - Chamfer dimension - Maximum values
GB/T 6930-2002 Rolling bearing - Vocabulary
JB/T 2974-2004 Rolling bearings - Combined needle roller bearings -
Specification
JB/T 8877-2011 rolling bearing needle roller combination of technical
conditions
3 Terms and definitions
The terms and definitions as defined in GB/T 6930-2002 apply to this
document.
4 Symbols
The following symbols apply to this document.
Unless otherwise stated, the symbols as shown in Figures 1 ~ 4, and A.1 AND
the values as shown in Table 1, Table 2 and Table A.1 represent nominal
dimensions.
B. Inner ring width.
C. Combined bearing width.
C1. Distance between the center of the oil hole and the reference plane of
the race.
D. Needle roller bearing outer diameter.
D1. Thrust roller bearing shaft ring outer diameter.
D1smax. The maximum single outer diameter of D1.
D2. Thrust roller bearing race outer diameter.
D3. Thrust roller bearing enclosure outer diameter.
d. Inner ring inner diameter.
d1. Thrust roller bearing shaft ring inner diameter.
F. Inner ring raceway diameter.
Fw. Overall inner diameter of the needle roller.
Fwsmin. Overall minimum single inner diameter of the needle roller.
r. Inner ring chamfer size.
r1. Chamfer size of thrust roller bearing shaft ring AND needle roller bearing
outer ring.
rsmin. Minimum single chamfer size of r.
R1smin. Minimum single chamfer size or r1.
T. Thrust roller bearing height.
5 Structural type
The structure of the combined bearing is as shown in Figure 1 ~ Figure 4.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 16643-2015 be delivered?Answer: The full copy PDF of English version of GB/T 16643-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 16643-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16643-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 16643-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 16643-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16643-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 16643-2015?A step-by-step guide to download PDF of GB/T 16643-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 16643-2015".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|