HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

GB/T 1634.2-2019 PDF English

US$135.00 · In stock · Download in 9 seconds
GB/T 1634.2-2019: Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 1634.2: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB/T 1634.2-2019English135 Add to Cart 0-9 seconds. Auto-delivery Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite Valid
GB/T 1634.2-2004English85 Add to Cart 0-9 seconds. Auto-delivery Plastics -- Determination of temperature of deflection under load -- Part 2: Plastids, ebonite and long-fibre-reinforced composites Obsolete

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB/T 1634.2-2019
      

Similar standards

GB/T 1634.1   GB/T 1634.1   GB/T 1633   GB/T 1632.1   

GB/T 1634.2-2019: Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT1634.2-2019
NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 83.080.01 G 31 Replacing GB/T 1634.2-2004 Plastics - Determination of temperature of deflection under load - Part 2.Plastics and ebonite (ISO 75-2.2013, MOD) Issued on. MAY 10, 2019 Implemented on. APRIL 01, 2020 Issued by. State Administration for Market Regulation; Standardization Administration of the PRC.

Table of Contents

Foreword... 3 Introduction... 5 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Principle... 7 5 Apparatus... 7 6 Test specimens... 8 7 Conditioning... 9 8 Procedure... 9 9 Expression of results... 10 10 Precision... 10 11 Test report... 10 Annex A (Informative) Precision... 11 Bibliography... 13

Foreword

GB/T 1634 "Plastics - Determination of temperature of deflection under load" is divided into 3 parts. - Part 1.General test method; - Part 2.Plastics and ebonite; - Part 3.High-strength thermosetting laminates. This Part is Part 2 of GB/T 1634. This Part is drafted in accordance with the rules given in GB/T 1.1-2009. This Part replaces GB/T 1634.2-2004 "Plastics - Determination of temperature of deflection under load - Part 2.Plastids, ebonite and long-fibre-reinforced composites". Compared with GB/T 1634.2-2004, in addition to editorial modifications, the main technical changes are as follows. - Delete the edgewise test (see Annex A of the 2004 edition); - Modify the precision (see Annex A; Annex B of the 2004 edition). This Part uses redraft law to modify and adopt ISO 75-2.2013 "Plastics - Determination of temperature of deflection under load - Part 2.Plastics and ebonite". The technical differences between this Part and ISO 75-2.2013 and their reasons are as follows. - As for the normative references, this Standard has adjusted the technical differences, to adapt to the technical conditions of China. The adjustments are mainly reflected in Clause 2 “Normative references”. The specific adjustments are as follows.  Replace ISO 75-1 with GB/T 1634.1-2019 which modifies and adopts the international standard;  Replace ISO 293 with GB/T 9352-2008 which is identical to the international standard;  Replace ISO 294-1 with GB/T 17037.1-1997 which is identical to the international standard;  Replace ISO 20753 with GB/T 37426-2019 which modifies and adopts the international standard;  Replace the undated ISO 2818 with a dated ISO 2818.1994;  Replace the undated ISO 10724-1 with a dated ISO 10724-1.1998. This Part has made the following editorial modifications. - Modify the Introduction; - Modify Annex A. ADD the precision data made by China’s laboratories. This Part was proposed by China Petroleum and Chemical Industry Federation. This Part shall be under the jurisdiction of National Technical Committee 15 on Plastics of Standardization Administration of China (SAC/TC 15). Main drafting organizations of this Part. China Bluestar Chengrand (Chengdu) Testing Technology Co., Ltd., Chengrand Research Institute of Chemical Industry Co., Ltd., Guangdong Yuanrong New Material Co., Ltd., Shenzhen Wance Testing Machine Co., Ltd., Chengde Jinjian Testing Instrument Co., Ltd., Shandong Dawn Polymer Material Co., Ltd., SINOPEC Beijing Yanshan Company Resin Application Research Institute. Main drafters of this Part. Xie Peng, Chen Minjian, Chen Xin, Mou Xiufa, Ren Yufeng, Zhao Lei, Huang Heliu, Jia Haiqiao. The previous editions of the standard replaced by this Part were released as follows. - GB/T 1634.2-2004.

1 Scope

This Part of GB/T 1634 specifies three methods, using different values of constant flexural stress, which can be used for the determination of the temperature of deflection under load of plastics (including filled plastics and fibre-reinforced plastics in which the fibre length is up to 7.5 mm) and ebonite.

2 Normative references

The following documents are indispensable for the application of this document. For the dated references, only the editions with the dates indicated are applicable to this document. For the undated references, the latest edition (including all the amendments) are applicable to this document.

3 Terms and definitions

For the purposes of this document, the terms and definitions given in GB/T 1634.1-2019 apply.

4 Principle

The principle is specified in GB/T 1634.1-2019, Clause 4.

5 Apparatus

This is specified in GB/T 1634.1-2019, 5.2. This is specified in GB/T 1634.1-2019, 5.3. This is specified in GB/T 1634.1-2019, 5.5.

6 Test specimens

This is specified in GB/T 1634.1-2019, 6.4. Discrepancies in test results due to variations in moulding conditions may be minimized by annealing the test specimens before testing them. Since different materials require different annealing conditions, annealing procedures shall be employed only if required by the materials standard or if agreed upon by the interested parties.

7 Conditioning

This is specified in GB/T 1634.1-2019, Clause 7.

8 Procedure

This is specified in GB/T 1634.1-2019, 8.1. The flexural stress produced shall be one of the following.

9 Expression of results

This is specified in GB/T 1634.1-2019, Clause 9.

10 Precision

See Annex A.

11 Test report

This is specified in GB/T 1634.1-2019, Clause 11. The test report shall also include the following additional information.

Annex A

(Informative) Precision In order to determine the precision of the test methods specified in this Part, in 2017, 9 laboratories were organized in accordance with GB/T 6379.2-2004; an interlaboratory cycle test was conducted using 5 materials. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB/T 1634.2-2019 be delivered?

Answer: The full copy PDF of English version of GB/T 1634.2-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 1634.2-2019_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 1634.2-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB/T 1634.2-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 1634.2-2019?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1634.2-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 1634.2-2019?

A step-by-step guide to download PDF of GB/T 1634.2-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 1634.2-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9