GB/T 14635-2020 PDF English
US$205.00 · In stock · Download in 9 secondsGB/T 14635-2020: Rare Earth Metals and Their Compounds - Determination of Total Rare Earth Content Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 14635: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 14635-2020 | English | 205 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Rare Earth Metals and Their Compounds - Determination of Total Rare Earth Content
| Valid |
| GB/T 14635-2008 | English | 160 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Rare earth metals and their compounds -- Determination of total rare earth contents
| Obsolete |
| GB/T 14635.1-1993 | English | 199 |
Add to Cart
|
2 days
|
Rare earth metals and their compounds. Determination of total rare earth contents. Rare earth oxalate gravimetric method
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 14635-2020
GB/T 14635-2020: Rare Earth Metals and Their Compounds - Determination of Total Rare Earth Content
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT14635-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.120.99
H 14
GB 14635-2020
Replacing GB/T 14635-2008
Rare Earth Metals and Their Compounds
- Determination of Total Rare Earth Content
Issued on. NOVEMBER 19, 2020
Implemented on. OCTOBER 01, 2021
Issued by. State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword... 3
1 Scope... 6
2 Method-1.Oxalate Gravimetric Method... 7
3 Method-2.EDTA Titration Method... 14
4 Quality Assurance and Control... 21
1 Scope
This Standard specifies the determination method of total rare earth content in the rare
earth metals and their compounds.
This Standard is applicable to the determination of the total rare earth content in rare
earth metals and their compounds. This Standard contains two methods. Method-1 is
oxalate gravimetric method, and Method-2 is EDTA titration method. Method-1 is
applicable to the determination of the total rare earth content in single and mixed rare
earth metals and their compounds; the determination range is shown in Table 1; it is
not applicable to the determination of the total rare earth content in single and mixed
rare earth metals and their compounds mainly based on erbium, thulium, ytterbium,
and lutetium or the individual content of thorium and lead is greater than 0.1%. Method-
2 is applicable to the determination of the total rare earth content in the single rare
earth metals and mixed rare earth metals and their compounds mainly based on heavy
rare earth holmium, erbium, thulium, ytterbium, and lutetium; the determination range
is shown in Table 2; it is not applicable to the determination of the total rare earth
content in the single rare earth with relative purity less than 99.5%, as well as in a
single rare earth metal and its compounds with other impurity elements greater than
0.5%; it is also not applicable to the determination of the total rare earth content in
materials with individual content of thorium, scandium, and zinc greater than 0.1%.
2 Method-1.Oxalate Gravimetric Method
2.1 Principle of method
After the specimen is decomposed by acid, the rare earth is precipitated in ammonia
water to separate calcium and magnesium.
2.2 Reagents and materials
2.2.1 Perchloric acid (ρ=1.67g/mL).
2.2.2 Hydrogen peroxide (30%).
2.2.3 Hydrochloric acid (1+1).
2.2.4 Nitric acid (1+1).
2.2.5 Ammonia water (1+1).
2.2.6 Oxalic acid solution (50g/L).
2.2.8 Oxalic acid lotion (2g/L).
2.3 Apparatus
2.4 Specimen
2.4.1 The oxide layer on the surface shall be removed from the metal specimen and
weigh immediately after sampling.
2.5 Analytical procedures
2.5.1 Testing materials
Weigh the specimen (2.4) according to Table 4, accurate to 0.0001g.
2.5.2 The number of determinations
Weigh two portions of testing materials for parallel determination, and take the average
value.
2.5.3 Determination
3 Method-2.EDTA Titration Method
3.1 Principle of the method
The testing materials are dissolved in acid; and sulfosalicylic acid is used to mask the
ions e.g., ferric ion, etc. Under the condition of pH 5.5, xylenol orange is used as an
indicator; and use the EDTA standard solution to titrate the rare earth.
3.2 Reagents
3.3 Specimen
3.3.1 The surface oxide layer shall be removed from the metal specimen; and weigh
immediately after sampling.
3.3.2 There are many types of rare earth compounds and their chemical properties are
different. The basic state of the different compound specimen to determine the total
rare earth content is difference. The basic state of measurement for each different
compound is shown in Table 8.There are usually 3 ways.
3.4 Analysis procedures
3.4.1 Testing materials
Take the specimen (3.3) according to Table 9, accurate to 0.0001g.
3.4.2 The number of determinations
Weigh two specimens for parallel determination, and take the average value.
3.4.3 Determination
3.4.3.1 Dissolution of the testing materials
3.4.3.1.5 Dissolution of rare earth chloride. place the testing materials (3.4.1) in a
200mL beaker; add 20mL of water, 10mL of hydrochloric acid (3.2.5); cover with a
watch glass; and take it off and cool to the room temperature after heating at low
temperature to dissolve completely. Transfer the solution into a 200 mL volumetric flask;
dilute to the mark with water, and mix well.
3.5 Calculation and expression of analysis results
3.5.1 Calculation and expression of the total rare earth content in rare earth metal
testing materials
3.5.2 Calculation and expression of the total rare earth content in the rare earth
compound testing materials
The determination results of the total rare earth content in each rare earth compound
are all the total rare earth content in the specimens with corresponding measurement
basic state. The total rare earth content is calculated by the mass fraction w (REO) of
rare earth oxide (REO), which is calculated as per Formula (5).
3.5.3 The calculation and expression of the total rare earth content in the mixed
rare earth metal testing materials with heavy rare earth holmium, erbium, thulium,
ytterbium and lutetium as the main body
3.5.4 The calculation and expression of the total rare earth content in the mixed
rare earth compound testing materials with heavy rare earth holmium, erbium,
thulium, ytterbium, and lutetium as the main body
3.6 Precision
3.6.1 Repeatability
For the measured values of two independent test results obtained under repeatability
conditions, within the average range given below, the absolute difference between the
two test results does not exceed the repeatability limit (r);
3.6.2 Tolerance
The difference between the analysis results among laboratories shall be no greater
than the tolerance listed in Table 11.
4 Quality Assurance and Control
Regularly use self-made control standard sample (if there is a national or industry-level
standard sample, it should be used first) to check the effectiveness of this standard
analysis method once.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 14635-2020 be delivered?Answer: The full copy PDF of English version of GB/T 14635-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 14635-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14635-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 14635-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 14635-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14635-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 14635-2020?A step-by-step guide to download PDF of GB/T 14635-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 14635-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|