GB/T 14464-2008 (GBT14464-2008)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
GB/T 14464-2008	English	319	Add to Cart	3 days [Need to translate]	Polyester staple fibre	GB/T 14464-2008	Obsolete	GB/T 14464-2008

GB/T 14464-2008
Polyester staple fibre
ICS 59.060.20
W52
National Standards of People's Republic of China
Replacing GB/T 14464-1993
Polyester staple fiber
Posted 2008-08-06
2009-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard replaces GB/T 14464-1993 "polyester staple fiber."
This standard and GB/T 14464-1993 compared to the main changes are as follows.
--- Scope of the density of the product line by 1.5dtex ~ 6.0dtex extended to 0.8dtex ~ 6.0dtex, while increasing light
Polyester staple fiber products;
--- Normative references added GB/T 1250 "expressed the determination of limiting values \u200b\u200band methods" and GB/T 14189 "fiber
Victoria grade polyester chips (PET) ";
--- Terms and Definitions section increased term production batch, inspection and other approved;
--- Part.
● Product class is divided into superior products, first-class products, qualified three levels;
● increase the quality difference requirements.
--- Inspection rules added in accordance with GB/T 1250 "expressed the determination of limiting values \u200b\u200band methods" rounding value comparison method
Level determination content.
The standard proposed by China Textile Industry Association.
This standard by the Shanghai textile industry technical supervision of the centralized.
This standard was drafted. China Sinopec Yizheng Chemical Fiber Co., Ltd., Jiangsu three bedrooms Lane Group Co., Ltd., China Petroleum & Chemical Corporation
Ltd. Luoyang Branch, Shanghai textile industry technical supervision, Synthetic Fiber Co., Ltd. Shanghai Alliance Kyrgyzstan.
The main drafters of this standard. Zhao Fu Ping, Zhang Lingxia, Liao Wang, Li Guantao, Yang Yan, Chen Lixing.
This standard replaces the standards previously issued as follows.
--- GB/T 14464-1993.
Polyester staple fiber
1 Scope
This standard specifies the polyester staple fiber product classification, technical requirements, test methods, inspection rules and signs, packaging, transportation and storage
Claim.
This standard applies to a linear density of 0.8dtex ~ 6.0dtex of semi-dull, bright, circular cross-section polyester staple fiber (free of colored fibers
And hollow fiber), other types of polyester staple fiber can refer to use.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
Representation GB/T 1250 limit values \u200b\u200band the method of determining
GB/T 3291.1 textile material properties and test - Part 1. fibers and yarns
GB/T 4146 Textile terms (chemical fibers)
GB/T 6503 Test Methods for chemical fiber moisture regain
GB/T 6504 Test method for chemical fiber oil content
GB/T 14189 fiber grade polyester chip (PET)
GB/T 14334 chemical fiber staple sampling method
GB/T 14335 chemical fiber staple linear density test method
GB/T 14336 chemical fiber staple length of the test method
GB/T 14337 chemical fiber short fiber tensile properties
GB/T 14338 chemical fiber staple crimp performance test method
GB/T 14339 chemical fiber staple defect test method
GB/T 14342 synthetic staple fiber than the resistance test method
FZ/T 50004 polyester staple fiber dry heat shrinkage test method
3 Terms and Definitions
GB/T 3291.1 and GB/T 4146 and established the following terms and definitions apply to this standard.
3.1
Raw and auxiliary materials, the same process conditions and product specifications, continuous production batch number within a certain time.
3.2
To test the production characteristics and stability batches of product quality, the use of periodic or determined according to the production batch number.