GB/T 13911-2008 PDF English
US$150.00 · In stock · Download in 9 secondsGB/T 13911-2008: Designation for metallic coating and chemical treatment Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 13911: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 13911-2008 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Designation for metallic coating and chemical treatment
| Valid |
| GB/T 13911-1992 | English | 279 |
Add to Cart
|
3 days
|
Expression methods for metallic coating and chemical treatment
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 13911-2008
GB/T 13911-2008: Designation for metallic coating and chemical treatment---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT13911-2008
GB
NATIONAL STANDARD
ICS 25.220.40
A 29
Replacing GB/T 13911-1992
Designation for metallic coating and
chemical treatment
Issued on. JULY 01, 2008
Implemented on. FEBRUARY 01, 2009
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the PRC.
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Terms and definitions... 5
4 Designation for metallic coating and chemical treatment... 5
5 Examples of designation for typical coatings... 8
1 Scope
This standard specifies the designation of metallic coating and chemical
treatment.
This standard applies to the designation for the electroplating, chemical plating,
and chemical treatment for metallic and non-metallic parts.
As for the designation for aluminum and aluminum alloy surface chemical
treatment, it may make reference to the general designation methods as
specified in this standard.
Note. when there is requirements for the metallic coating and chemical
treatment which are not covered in this standard, it is allowed to make
description in relevant technical documents.
2 Normative references
The provisions in following documents become the provisions of this Standard
through reference in this Standard. For the dated references, the subsequent
amendments (excluding corrections) or revisions do not apply to this Standard;
however, parties who reach an agreement based on this Standard are
encouraged to study if the latest versions of these documents are applicable.
For undated references, the latest edition of the referenced document applies.
GB/T 3138 Terminology for metallic coating, chemical treatment and related
process (GB/T 3138-1995, neq ISO 2079.1981)
GB/T 9797 Metallic coatings - Electroplated coatings of nickel plus
chromium and of copper plus nickel plus chromium (GB/T 9797-2005, ISO
1456.2003, IDT)
GB/T 9798 Metallic coatings - Electrodeposited coatings of nickel (GB/T
9798-2005, ISO 1458.2002, IDT)
GB/T 9799 Metallic coatings - Electroplated coatings of zinc on iron or steel
(GB/T 9799-1997, eqv ISO 2081.1986)
GB/T 11379 Metallic coatings - Electroplated coatings of chromium for
engineering purposes (GB/T 11379-2008, ISO 6158.2004, IDT)
GB/T 12332 Metallic coatings - Electroplated coatings of nickel for
engineering purposes (GB/T 12332-2008, ISO 4526.2004, IDT)
GB/T 12599 Metallic coatings - Electroplated coatings of tin - Specification
and test methods (GB/T 12599-2002, ISO 2093.1986, MOD)
3 Terms and definitions
The terms and definitions established in GB/T 3138 apply to this standard.
4 Designation for metallic coating and chemical
treatment
4.1 The designation for metallic coating and chemical treatment is generally
composed of four parts.
Part 1 includes the coating method, which is an essential element to constitute
the designation;
5 Examples of designation for typical coatings
5.1 Designation of nickel + chromium and copper + nickel + chromium
electroplating on metallic base
As for the designation of the nickel + chromium and copper + nickel +
chromium electroplated layer on the metallic base, SEE the provisions of GB/T
9797 on designations; as for the designation of coating characteristics, SEE
Table 3; the example of typical designation is as below; as for the non-typical
designation, SEE GB/T 9797.
5.2 Nickel + chromium coating on plastic
As for the designations of nickel + chromium, copper + nickel + chromium
coating layer on plastics, SEE the provisions on designation in GB/T 12600; as
for the coating characteristic designation, SEE Table 3.The example and
description of designation are as follows.
5.4 Designation of zinc coating layer and cadmium coating layer on iron
and steel
As for the designations of zinc coating layer and cadmium coating layer on iron
and steel, SEE the provisions on designation in GB/T 9799 and GB/T 13346;
as for the chemical treatment and classification symbols related to
electro-galvanizing and cadmium plating layer, SEE Table 4.The example and
description of designation are as follows.
5.5 Designation of chromium electroplating for engineering purposes
As for the designation for the chromium electroplated layer for engineering
purposes, SEE the provisions in GB/T 11379.As for the characteristic symbols
of the chromium coating for engineering purposes in the designation, SEE
Table 5.In order to ensure good adhesion between the coating and the base
metal, the chromium for engineering purposes shall, before and after
electroplating, be subjected to heat treatment sometimes.
5.6 Designation of nickel electroplating for engineering purposes
As for the designation for the nickel electroplating for engineering purposes,
SEE the provisions of GB/T 12332.As for the engineering nickel coating type,
sulfur content and ductility symbol in the designation, SEE Table 7.In order to
ensure good adhesion between the coating and the base metal, the nickel for
engineering purposes shall, before and after electroplating, be subjected to
heat treatment sometimes. As for the characteristic symbols for the coating
heat treatment, SEE Table 6.The example and description of designation are
as follows.
5.8 Designation of silver and silver alloy electroplating for engineering
purposes
As for the designations for the silver and silver alloy electroplating for
engineering purposes, SEE the provisions in ISO 4521.As for the commonly
used thickness of precious metal electroplating, SEE Table 8.The example of
typical designation is as follows, AND the non-typical designation is as shown
in ISO 4521.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 13911-2008 be delivered?Answer: The full copy PDF of English version of GB/T 13911-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 13911-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13911-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 13911-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 13911-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13911-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 13911-2008?A step-by-step guide to download PDF of GB/T 13911-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 13911-2008".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|