Powered by Google www.ChineseStandard.net Database: 189759 (21 Apr 2024)

GB/T 13818-2009 (GBT13818-2009)

GB/T 13818-2009_English: PDF (GBT 13818-2009, GBT13818-2009)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 13818-2009English125 Add to Cart 0--9 seconds. Auto-delivery Die casting zinc alloys Valid GB/T 13818-2009

Standard ID GB/T 13818-2009 (GB/T13818-2009)
Description (Translated English) Die casting zinc alloys
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J31
Classification of International Standard 77.120.60
Word Count Estimation 6,686
Date of Issue 2009-04-01
Date of Implementation 2009-12-01
Older Standard (superseded by this standard) GB/T 13818-1992
Adopted Standard ASTM B86-2006, MOD
Drafting Organization FAW Foundry Co., Ltd.
Administrative Organization Casting National Standardization Technical Committee
Regulation (derived from) National Standard Approval Announcement 2009 No.5 (Total No.145)
Proposing organization China Machinery Industry Federation
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This standard specifies the representation letter grades and die-cast zinc alloy, technical requirements, test methods and inspection rules, packaging, transportation and storage requirements. This standard applies to die cast zinc alloy material.

Standards related to: GB/T 13818-2009

GB/T 13818-2009
ICS 77.120.60
J 31
GB/T 13818-1992
Die Casting Zinc Alloys
Issued by. General Administration of Quality Supervision, Inspection and
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Alloy Grade and Code Expression Method ... 5
4 Technical Requirements ... 5
5 Test Methods and Inspection Rules... 6
6 Package, Transportation and Storage ... 6
Appendix A (Informative) Zinc Alloy Grade Comparison Form ... 7
This Standard modifies and adopts ASTM B 86-06 Standard Specification for Zinc and
Zinc-Aluminum Alloys for Casting and Die Casting.
Compared with ASTM B 86-06, this Standard has the following major technical
--- Make larger editorial changes in the structure;
--- Don’t use the ordering information and reference documents in the ASTM B 86-
--- Add the grade and code expression methods for die casting zinc;
--- Add Appendix A Zinc Alloy Grade Comparison Form.
This Standard replaces GB/T 13818-1992 Die Casting Zinc Alloys.
Compared with GB/T 13818-1992, this Standard mainly has the following technical
--- Delete the requirements for mechanical property;
--- Modify the expression method of grade;
--- Add three kinds of high-aluminum zinc alloys.
--- Appendix A of this Standard is informative one.
This Standard was proposed by China Machinery Industry Federation.
This Standard shall be under the jurisdiction of the National Technical Committee of
Standardization of Casting (SAT/TC 54).
Drafting organizations of this Standard. FAW Foundry Co., Ltd., Dongguan Shijie
Huafeng Hardware Factory, Zhanjiang Deli Carburetor Co., Ltd., Ningbo Wan’an Group
Co., Ltd., and MG Technology (Shenzhen) Co., Ltd..
Chief drafting staffs of this Standard. Ma Shunlong, Liu Haifeng, Liang Huancao, Zhao
Binghua, He Jingyuan, and Li Yuanfa.
The historical edition replaced by this Standard is as follows.
--- GB/T 13818-1992.
Die Casting Zinc Alloys
1 Scope
This Standard specifies the grade and code expression method, technical
requirements, inspection methods and inspection rules, package, transportation,
storage and other requirements of die casting zinc alloys.
This Standard is applicable to the die casting zinc alloys.
2 Normative References
The following documents contain the provisions which, through reference in this
Standard, become the provisions of this Standard. For dated references, their
subsequent amendments (excluding corrigendum) or revisions do not apply to this
Standard. However, the parties who enter into agreement based on this Standard are
encouraged to investigate whether the latest versions of these documents are
applicable. For undated reference documents, the latest versions apply to this
GB/T 12689.1 Methods for Chemical Analysis of Zinc and Zinc Alloys - Part 1.
Determination of Aluminum Content - Chromazurol S-Polyethylene Glycol Octyl
Phenylether-Cetylpyridine Bromine Spectrophotometry, Chromeazurol S
Spectrophotometric Method and EDTA Titrimetry
GB/T 12689.3 The Methods for Chemical Analysis of Zinc and Zinc Alloys - The
Determination of Cadmium Content - The Flame Atomics Absorption
Spectrometric Method
GB/T 12689.4 The Methods for Chemical Analysis of Zinc and Zinc Alloys - The
Determination of Copper Content - The Lead Diethyldithio-Carbamate
Spectrophotometric Method and The Flame Atomic Absorption Method
GB/T 12689.5 The Methods for Chemical Analysis of Zinc and Zinc Alloys - The
Determination of Iron Content - The Sultosalicylic Acid Spectrometric Method and
the Flame Atomic Absorption Spectrometric
GB/T 12689.6 The Methods for Chemical Analysis of Zinc and Alloys - The
Determination of Lead Content - The Oscillopolarographic Method
GB/T 12689.7 The Methods for Chemical Analysis of Zinc and Zinc Alloys - The