Search result: GB/T 13575.1-2022 (GB/T 13575.1-2008 Older version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13575.1-2022 | English | 749 |
Add to Cart
|
6 days [Need to translate]
|
Classical and narrow V-belt drives - Part 1: System based on datum width
| Valid |
GB/T 13575.1-2022
|
| GB/T 13575.1-2008 | English | RFQ |
ASK
|
5 days [Need to translate]
|
Classical and narrow V-belt drives -- Part 1: System based on datum width
| Obsolete |
GB/T 13575.1-2008
|
| GB/T 13575.1-1992 | English | 999 |
Add to Cart
|
6 days [Need to translate]
|
Belt drives--Classical V-belt drives
| Obsolete |
GB/T 13575.1-1992
|
| Standard ID | GB/T 13575.1-2022 (GB/T13575.1-2022) | | Description (Translated English) | Classical and narrow V-belt drives -- Part 1: System based on datum width | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J18 | | Classification of International Standard | 21.220.10 | | Word Count Estimation | 38,33 | | Date of Issue | 2022-12-30 | | Date of Implementation | 2023-07-01 | | Older Standard (superseded by this standard) | GB/T 13575.1-2008 | | Drafting Organization | Weishi County Jiulong Rubber & Plastic Co., Ltd., Zhongji Productivity Promotion Center Co., Ltd., Zhejiang Samsung Tape Co., Ltd., Zhejiang Baoerli Rubber & Plastic Co., Ltd., Sanlis Co., Ltd., Shiyan City Industrial Product Quality Inspection and Testing Institute, Sharp Niu Co., Ltd., Shaoxing Huafangyuan Transmission Technology Co., Ltd., Sichuan Deen Seiko Technology Co., Ltd., Jinjiulong Industrial Co., Ltd., Wuhu Precision Transmission System Research Institute, Zhejiang Anglo Transmission System Co., Ltd., Qingdao City Products Institute of Quality Inspection, Changchun University | | Administrative Organization | National Pulley and Belt Standardization Technical Committee (SAC/TC 428) | | Proposing organization | State Administration for Market Regulation, National Standardization Management Committee |
GB/T 13575.1-2022
ICS 21.220.10
CCSJ18
National Standards of People's Republic of China
Replace GB/T 13575.1-2008
Ordinary and narrow V-belt drives
Part 1.Datum width system
Posted on 2022-12-30
2023-07-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents"
drafting.
This document is Part 1 of GB/T 13575 "Common and narrow V-belt drives". GB/T 13575 has issued the following parts.
--- Part 1.Datum width system;
--- Part 2.Effective width system.
This document replaces GB/T 13575.1-2008 "Ordinary and Narrow V-belt Drives Part 1.Reference Width System", and GB/T 13575.1-
Compared with.2008, except for structural adjustment and editorial changes, the main technical changes are as follows.
---Changed some symbols. top width b is changed to W, pitch width bp is changed to WP, height h is changed to T, wheel groove pitch width bd is changed to Wd, groove angle
ψ is changed to α, the center distance a is changed to C, the wrap angle α is changed to θ, and the wrap angle coefficient Kα is changed to Kθ (see Figure 1, Figure 2, 6.8 and Table 23,.2008
Figure 1, Figure 2, 5.8 and Table 19 of the Annual Edition);
--- Deleted the wedge angle with the basic dimensions of the section (see Figure 1 and Table 1 of the.2008 edition);
--- Increased trimmed ordinary V-belt and pulley models (see Table 1, Table 2, Table 4, Table 5 and Table 6);
---Deleted the technical requirements for belts (see 3.3 of the.2008 edition);
--- Deleted the geometric tolerance mark of the wheel groove section (see Figure 2, Figure 2 of the.2008 edition);
--- Deleted some requirements on the reference diameter (see 4.2.1 of the.2008 edition);
--- Deleted the technical requirements for pulleys (see 4.2.3 of the.2008 edition);
--- Added the requirements for the selection of the belt type when the selection point is at the junction of the two belt types (see 6.3.1, 6.3.2);
--- Added the selection diagram of ordinary V-belts with cut edges (see Figure 4);
--- Added the calculation formula for the reference diameter of the large pulley during the speed-up transmission (see 6.5);
---Changed the calculation formula in the transmission center distance formula (see 6.8, 5.8 of the.2008 edition);
--- Increase the precise calculation formula of the small pulley wrap angle (see 6.9);
--- Increased the rated power calculation formula of ordinary V-belts and trimmed ordinary V-belts (see 6.11);
--- Changed the basic rated power value and the power increment value caused by the transmission ratio of ordinary single V-belt A, B, C and D types (see
Table 10, Table 11, Table 12 and Table 13, Table 10, Table 11, Table 12 and Table 13 of the.2008 edition);
--- Added the basic rated power value of ordinary V-belt trimming and the power increment value caused by the transmission ratio (see Table 15, Table 16 and Table 17);
--- Increase the transmission ratio correction factor (see Table 22);
--- Changed part of the wrap angle correction coefficient (see Table 23, Table 19 of the.2008 edition);
--- Changed the adjustment of the center distance and the inspection of the initial tension value (see Figure 7, Figure 6 of the.2008 edition).
Please note that some contents of this document may refer to patents. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China Machinery Industry Federation.
This document is under the jurisdiction of the National Pulley and Belt Standardization Technical Committee (SAC/TC428).
This document was drafted by. Weishi County Jiulong Rubber & Plastic Co., Ltd., China Machinery Productivity Promotion Center Co., Ltd., Zhejiang Sanxing Tape Co., Ltd.
Division, Zhejiang Baoerli Rubber & Plastic Co., Ltd., Sanlis Co., Ltd., Shiyan City Industrial Product Quality Inspection and Testing Institute, Ruiniu Co., Ltd.
Co., Ltd., Shaoxing Huafangyuan Transmission Technology Co., Ltd., Sichuan Deen Seiko Technology Co., Ltd., Jinjiulong Industrial Co., Ltd., Wuhu
City Precision Transmission System Research Institute, Zhejiang Anglo Transmission System Co., Ltd., Qingdao Product Quality Inspection Research Institute, Changchun University.
The main drafters of this document. Fan Jingyun, Tao Dazhong, Qin Shuan, Zhou Yujie, Chen Xiaobin, Pang Changzhi, Wu Qiongying, Guo Fei, Zhu Shusheng, Xie Deli,
Xie Longde, Zhang Liujie, Zhu Liusheng, Ruan Yiyi, Hao Yongliang, Shi Yaochen, Zhou Peng.
This document was first released in.1992, revised for the first time in.2008, and this is the second revision.
introduction
V-belt transmission is one of the most important transmission modes in belt transmission. Ordinary and narrow V-belt transmissions are the most basic forms of V-belt transmission. They are widely used.
Used in various fields of general industry (machine tools, mining machinery, petroleum machinery, coal mining machinery, woodworking machinery, garden machinery, etc.). my country as early as.1992
Two national standards, "Belt Drive Ordinary V-Belt Drive" and "Belt Drive Narrow V-Belt Drive" were issued. In.2008, the two national standards
The content has been expanded. With the rapid development of digital design, the parametric requirements for belt transmission system design are extremely urgent. Therefore, the two
The national standard has been revised. Ordinary and narrow V-belt drives can be divided into two series, the standard width system and the effective width system. GB/T 13575 aims at
In guiding the selection and design of the transmission system, it is proposed to be composed of two parts.
--- Part 1.Reference width V-belt drive content. The purpose is to establish the selection suitable for the reference width V-belt drive system
and design specifications.
--- Part 2.Effective width V-belt drive content. The purpose is to establish the type selection suitable for effective width V-belt transmission system
and design specifications.
Ordinary and narrow V-belt drives
Part 1.Datum width system
1 Scope
This document specifies the main dimensions, transmission design and installation and use of ordinary and narrow V-belts and pulleys under the reference width system
and so on.
This document applies to V-belt drives for general industrial use.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document.
GB/T 6931.1 Terminology of belt drives Part 1.Basic terms
GB/T 6931.2 Terminology of belt drives Part 2.V-belt and V-belt drives
GB/T 11544-2012 Dimensions of ordinary V-belts and narrow V-belts for belt drives (base width system)
GB/T 15531 Adjustment limit value of belt drive pulley center distance
3 Terms and Definitions
The terms and definitions defined in GB/T 6931.1 and GB/T 6931.2 apply to this document.
4 belts
4.1 Strip dimensions
The basic dimensions of the V-belt section are shown in Figure 1 and Table 1.
Explanation of indexing symbols.
W --- top width, in millimeters (mm);
WP --- section width, in millimeters (mm);
T --- height, in millimeters (mm).
Figure 1 V-belt section
......
GB/T 13575.1-2008
Classical and narrow V-belt drives Part 1. System based on datum width
ICS 21.220.10
J18
National Standards of People's Republic of China
Replacing GB/T 13575.1-1992
Vp and narrow belt drive
Part 1. datum width
[ISO 4183.1995, Beltdrives-ClassicalandnarrowV-belts-Groovedpuleys
(Systembasedondatumwidth), MOD]
Posted 2008-08-25
2009-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 13575 "and narrow V belt drive" consists of two parts.
--- Part 1. datum width;
--- Part 2. effective width.
This section GB/T 13575 Part 1.
The partial modification of the use of ISO 4183.1995 "Belt drives and narrow V-belt sheave (datum width)." And ISO 4183.
Compared to 1995, the main differences are.
--- Symbols of inconsistent standards in accordance with our revised standards, such as the groove angle α to φ, the reference by the width d d to Chou, the baseline
--- Relationship groove angle and the reference diameter by a separate chapter of the narrative to be listed in Table 4;
--- With increased cross-sectional dimension;
--- Increased transmission design content.
This Part replaces GB/T 13575.1-1992 "belt drive ordinary V belt drive," compared with the GB/T 13575.1-1992, the main
Modify as follows.
--- Name to "ordinary and narrow V-belt transmission - Part 1. datum width";
--- Cross-sectional dimensions of the original standard appendix band into the body, and cut with the long dimension, increasing the datum width narrow V-belt cross-sectional dimension;
--- Reference diameter pulley increases 1350mm, 1700mm, 2120mm, 2360mm four dimensions;
--- Deletion of the pulley diameter size.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee of the pulley and the belt (SAC/TC428) centralized.
This section is drafted. the machine Productivity Promotion Center, Hubei Automotive Industries Institute.
The main drafters of this section. Huang Gang, Liu Yong Germany, Qin Shuan.
This part of the Central Machine Productivity Promotion Center is responsible for interpretation.
This part of the standard replaces the previous editions are.
--- GB/T 13575.1-1992.
Vp and narrow belt drive
Part 1. datum width
1 Scope
This section provides press datum width installation and datum width ordinary V belt and narrow V belt drive design methods and gearing
Use and so on.
This section applies to general industrial V-belt drive.
V-belt pulleys designed to not be used in conjunction with a narrow V-belt for a single multi-groove V-belt pulleys can not be used in conjunction with the group.
2 Normative references
The following documents contain provisions which, through reference GB/T 13575 in this section constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB/T 1171 ships with ordinary V-belt drive
GB/T 10412 and narrow V - pulley (datum width) (GB/T 10412-2002, ISO 4183. 1985, MOD)
GB/T 11356.1 V belt drive pulley (datum width) - Geometrical inspection (GB/T 11356.1-2008, ISO 255.1990,
MOD)
GB/T 11357 pulley material, surface roughness and the balance (GB/T 11357-2008, ISO 254.1998, MOD)
GB/T 11544 ordinary V belt and narrow V Size (GB/T 11544-1997, neq ISO 4184.1992)
GB/T 15531 belt drive pulley center distance adjustment limit (GB/T 15531-2008, ISO 155.1998, MOD)
GB/T 12730 ships with a narrow V-belt drive
3 band
3.1 with the cross-sectional dimension
Basic dimensions with section shown in Figure 1 and Table 1.
1 Vp-sectional schematic band
......
|