|
US$419.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13008-2010: Technical specification for mixed and axial flow pumps
Status: Valid GB/T 13008: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13008-2010 | English | 419 |
Add to Cart
|
3 days [Need to translate]
|
Technical specification for mixed and axial flow pumps
| Valid |
GB/T 13008-2010
|
| GB/T 13008-1991 | English | 639 |
Add to Cart
|
5 days [Need to translate]
|
Technical specifications for mixed and axial flow pumps
| Obsolete |
GB/T 13008-1991
|
PDF similar to GB/T 13008-2010
Basic data | Standard ID | GB/T 13008-2010 (GB/T13008-2010) | | Description (Translated English) | Technical specification for mixed and axial flow pumps | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J71 | | Classification of International Standard | 23.080 | | Word Count Estimation | 18,126 | | Date of Issue | 2010-09-26 | | Date of Implementation | 2011-02-01 | | Older Standard (superseded by this standard) | GB/T 13008-1991 | | Quoted Standard | GB/T 699; GB/T 700; GB/T 1184; GB/T 1220; GB/T 2100; GB/T 3216; GB/T 4237; GB/T 7021; GB/T 9112; GB/T 9239.1; GB/T 9439; GB/T 11352; GB/T 13384; JB/T 4297; JB/T 6397; JB/T 8097; JB/T 8098 | | Regulation (derived from) | National Standard Approval Announcement 2010 No.6 (Total No.161) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the mixed-flow pump, axial flow pump (hereinafter referred to as the pump) order conditions, technical requirements, factory inspection and testing requirements and face performance test rules. This standard applies to transport water or physical and chemical properties similar to water pumps and fluid transport seawater pump. Conveying the liquid temperature not higher than 50��C. | GB/T 13008-2010: Technical specification for mixed and axial flow pumps---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Technical specification for mixed and axial flow pumps
ICS 23.080
J71
National Standards of People's Republic of China
Replacing GB/T 13008-1991
Francis pumps, axial flow technical conditions
Issued on. 2010-09-26
2011-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Ordering Condition 2
5 2 Technical Requirements
5.1 General 2
5.2 Performance 2
5.3 Design of 3
5.4 Main parts and materials 5
5.5 Manufacturing 5
6 factory inspection and testing 10
6.1 General 10
6.2 Testing and Materials 10
6.3 10 pump test and inspection
7 Performance Test Rule 11
7.1 General 11
7.2 Type tests 11
7.3 Contract Test 11
Model 7.4 or field test 11
8 11 warranty period
9 signs, packaging, transportation and storage 11
Appendix A (informative) mixed flow pumps, axial flow data table 13
Foreword
This standard is GB/T 13008-1991 "Francis pumps, axial flow pump technical conditions" amendments.
This standard compared with GB/T 13008-1991 main changes are as follows.
--- This standard GB/T 1.1-2000 standard format editor;
--- Increased directory, preface;
--- Modify the scope of the standard (see Chapter 1);
--- Updated standard normative references press GB/T 1.1-2000 standard adds introductory phrase (see Chapter 2);
--- Improve the term "semi-regulated" and "full adjustment" is defined (see Chapter 3);
--- Increased the order conditions (see Chapter 4);
--- Adds several factors to determine the prime mover rated performance should be considered (see 5.3.1.1);
--- Clear the impeller parts do static balance, and an increase in provisions adjustable static balance test impeller blade angle (see 5.3.3);
--- Increased requirements for pressure parts connected by bolts (see 5.3.4.3);
--- Increasing the value of the sealing ring gap between the axial seal type when using specified (see 5.3.7.1);
--- Open and modify the provisions of semi-open impeller clearance value cylindrical impeller housing (see 5.3.7.2);
--- Increased computing bearings, lubrication, bearings temperature control requirements (see 5.3.9.1);
--- Increased the horizontal and inclined guide vane pump guide bearing requirements (see 5.3.9.4.2);
--- Increased role in the calculation of the flange (import and export) Requirements on external forces and torques (see 5.3.12);
--- Increased requirements axis protective measures (see 5.3.14);
--- Modify the main parts of the material requirements (see 5.4);
--- Improve the pump vibration measurement requirements (see 6.3.3.4);
--- Increased requirements for inspection and final inspection (see 6.3.4,6.3.5);
--- 5.2.1 modified 5.2.4,5.3.2 ~ ~ ~ 5.3.11,5.3.13,5.5,6.1,6.2,6.3.1 6.3.3, Chapter 7 and other provisions
Part of the content.
Appendix A of this standard is an informative annex.
This standard replaces GB/T 13008-1991.
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee pump (SAC/TC211) centralized.
This standard was drafted. on KSB Pumps Co., Ltd., Shanghai East Pump (Group) Co., Ltd. Hai Kai-chuen, Pump (Group) have
Limited, Shanghai Liancheng (Group) Co., Ltd., Wuhan Pump Co., Ltd., Ebara pump Bo Pump Co., Limited Zhejiang Pump Plant
Division, Hangzhou Alkali Pump Co., Ltd., Shenyang Institute of pumps.
The main drafters of this standard. Pan again Bing, Liu Weiwei, Xiaogong Huai, Yu Zelong, Weihua Tang, Zhangxue Sen, Yu Weiping, single-Jun, Zhou Dynasty,
SCIENS, yellow root, Han Zhong Bao, in one hundred Fang, Zhao Baokui, CHEN Yu-hua.
This standard replaces the standards previously issued as follows.
--- GB/T 13008-1991.
Francis pumps, axial flow technical conditions
1 Scope
This standard specifies the mixed-flow pump, axial flow pump (hereinafter referred to as the pump) ordering conditions, technical requirements, the factory inspection and testing requirements and performance test
Inspection rules.
This standard applies to transport water or physical and chemical properties similar to liquid water and the pump delivery seawater pump. Delivery temperature of the liquid
Not more than 50 ℃.
When present conflict between the technical requirements of more than one file, the following order shall determine the suitability of each file.
a) orders;
b) the data table (see Appendix A);
c) of this standard;
d) orders other criteria mentioned.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 699 high-quality carbon structural steel
GB/T 700 carbon structural steel
GB/T 1184 shape and position tolerances without individual tolerance value
GB/T 1220 stainless steel rods
GB/T 2100 general purpose corrosion resistant steel castings (GB/T 2100-2002, eqvISO 11972.1998)
GB/T 3216 rotary power pump hydraulic performance acceptance tests - Grades 1 and 2 (GB/T 3216-2005, ISO 9906.1999,
MOD)
GB/T 4237 hot-rolled stainless steel sheet and strip
GB/T 7021 centrifugal Terminology
GB/T 9112 steel pipe flanges with type parameters
GB/T 9239.1 Mechanical vibration steady state (rigid) rotor balance quality requirements - Part 1. Specification and balance tolerance test
(GB/T 9239.1-2006, ISO 1940-1.2003, IDT)
GB/T 9439 Gray Iron Castings
GB/T 11352 Carbon steel castings for general engineering purposes
GB/T 13384 mechanical and electrical products packaging General technical conditions
JB/T 4297 painting pump technical conditions
JB/T 6397 Large carbon structural steel forgings
Vibration Measurement JB/T 8097 pump and Evaluation Method
Noise measurement JB/T 8098 pump and Evaluation Method
3 Terms and Definitions
GB/T 7021 regulations and the following terms and definitions apply to this standard.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13008-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 13008-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 13008-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13008-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 13008-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13008-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|