|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12988-2009: Test method for abrasion resistance of inorganic paving materials
Status: Valid GB/T 12988: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 12988-2009 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Test method for abrasion resistance of inorganic paving materials
| Valid |
GB/T 12988-2009
|
| GB/T 12988-1991 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Test method for abrasion resistance of inorganic paving materials
| Obsolete |
GB/T 12988-1991
|
PDF similar to GB/T 12988-2009
Basic data | Standard ID | GB/T 12988-2009 (GB/T12988-2009) | | Description (Translated English) | Test method for abrasion resistance of inorganic paving materials | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q04 | | Classification of International Standard | 91.100.30 | | Word Count Estimation | 6,615 | | Date of Issue | 2009-03-09 | | Date of Implementation | 2009-11-05 | | Older Standard (superseded by this standard) | GB/T 12988-1991 | | Quoted Standard | GB/T 2478-2008 | | Regulation (derived from) | National Standard Approval Announcement 2009 No.2 (Total No.142) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the principles of inorganic material abrasion resistance test method for determining the ground by rolling method, abrasive, , specimens, calculation and assessment of test results, , test reports device test procedure. This standard applies to the determination of concrete, wear natural stone and other materials, inorganic ground, ceramics. | GB/T 12988-2009: Test method for abrasion resistance of inorganic paving materials---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test method for abrasion resistance of inorganic paving materials
ICS 91.100.30
Q04
National Standards of People's Republic of China
Replacing GB/T 12988-1991
Test method for abrasion inorganic ground material
Posted 2009-03-09
2009-11-05 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard EN14157.2004 "Natural stone abrasion resistance test method" non-equivalent.
This standard replaces GB/T 12988-1991 "inorganic ground material abrasion test method."
This standard compared with GB/T 12988-1991 main changes are as follows.
--- Standard name changed to "inorganic material surface abrasion resistance test method";
--- Abrasive sand replaced by a standard abrasive corundum;
--- Friction uniform regulations for the time 2min;
--- The test results were assessed using uniform regulations for the mill pit length of the specimen surface.
The standard proposed by China Building Materials Federation.
This standard by the National Standardization Technical Committee cement products (SAC/TC197) centralized.
This standard is drafted by. Liaoning Provincial Institute of Building Materials, building materials industry and technical supervision research center.
Participated in the drafting of this standard. National Building Material Safety Supervision and Inspection Center, building materials Supervision and Inspection Institute of Liaoning Province, building materials and labor
Industry Certification Center, Quanzhou peaks Machinery Manufacturing Co., Ningxia Machinery Research Institute (Co.), Zhejiang limited actually far Machinery
The company, Shenyang Heavy Machinery Group Co., Ltd., Guizhou seventh wheel of the public limited liability company.
The main drafters of this standard. Zhou Zhihong, Hou Ye, Yu Wei Jiang, Yang Xiangkun, Yang Bin, Xu Qinghui, Wangying Zhen, Ji Rong Wen Gan Yuan group by Liran,
Chi Master.
This standard was first released in 1991; this is the first revision.
Test method for abrasion inorganic ground material
1 Scope
This standard specifies the principles of the inorganic material surface abrasion resistance test method for the determination by the rolling method, equipment, abrasives, specimen, test procedures,
Calculation and evaluation of test results, test reports.
This standard applies to the determination of wear resistance of concrete, ceramics, natural stone and other inorganic surface materials.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 2478-2008 ordinary abrasive corundum
Principle 3
By friction drum under prescribed conditions and the abrasive effect of the specimen using the surface grinding pit, measuring the length of the value of the specimen surface grinding pit,
Represented by its abrasion resistance of the specimen.
4 Device
4.1 Steel Wheel Abrasion Tester
Steel wheel abrasion test bodies made by the friction drum, abrasive hopper, hopper diversion clamping pulley and counterweight, etc., shown in Figure 1. Abrasive
Hopper flow control valve for controlling the start and stop abrasives, hopper diversion valve for regulating the flow rate to ensure constant abrasive.
4.1.1 friction drum
Friction drum is made of 45 steel, quenched and tempered hardness of HB203 ~ HB245. Friction drum diameter 200.0mm ±
0.2mm, thickness of 70.0mm ± 0.1mm.
Friction drum rotational speed of 75r/(60 ± 3) s.
When the drum diameter of the friction and wear to 199.0mm, should be replaced.
4.1.2 clamping block
Clamping pulley mounted on the track abrasion test machine, provided with means securing the specimen by 14.00kg ± 0.01kg weight and make the specimen
Frictional contact with the drum, to control the pressing force of the test piece and the friction between the drum.
4.1.3 Hopper
Abrasive hopper volume greater than 5L, and with abrasive hopper control starting and stopping output of the control valve; diversion Hopper capacity should be greater than 1L,
Wherein the abrasive height should always be not less than 25mm, with a diversion hopper for regulating the abrasive flow rate control valve, so that a constant stream of abrasive
Speed \u200b\u200bthrough diversion rectangular hopper feed opening flow to the friction drum, adjustable flow rate not less than 1L/min.
Under diversion hopper rectangular spout mouth length should be 71.0mm ± 0.5mm, under the discharge opening from the centerline of the friction drum
75mm, abrasive flow and the friction drum edge distance, should be controlled at 5mm, shown in Figure 2.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 12988-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 12988-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 12988-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12988-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 12988-2009?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12988-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|