GB/T 12782-2022 PDF English
US$1005.00 · In stock · Download in 9 secondsGB/T 12782-2022: Requirement and test method of heating performance for motor vehicle Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 12782: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 12782-2022 | English | 1005 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Requirement and test method of heating performance for motor vehicle
| Valid |
| GB/T 12782-2007 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Motor vehicle -- Heating performance requirement -- Test method
| Obsolete |
| GB/T 12782-1991 | English | 199 |
Add to Cart
|
2 days
|
Motor vehicle--Heating performance--Test method
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 12782-2022
GB/T 12782-2022: Requirement and test method of heating performance for motor vehicle---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT12782-2022
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.020
CCS T 04
Replacing GB/T 12782-2007
Requirement and Test Method of Heating Performance for
Motor Vehicle
Issued on. DECEMBER 30, 2022
Implemented on. JULY 1, 2023
Issued by. State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative References... 5
3 Terms and Definitions... 5
4 Performance Requirements... 6
5 Test Conditions... 6
6 Test Methods... 8
7 Test Data Processing and Test Report... 11
Appendix A (informative) Transient Condition and Data of Heating Performance of
Chinese Motor Vehicles... 12
Appendix B (informative) Test Report... 86
1 Scope
This document specifies the requirement, test method, data processing and test report of heating
performance for motor vehicle.
This document is applicable to Category-M and Category-N motor vehicles.
2 Normative References
The contents of the following documents constitute indispensable clauses of this document
through the normative references in the text. In terms of references with a specified date, only
versions with a specified date are applicable to this document. In terms of references without a
specified date, the latest version (including all the modifications) is applicable to this document.
GB/T 12534 Motor Vehicles - General Rules of Road Test Method
GB/T 15089 Classification of Powder-driven Vehicles and Trailers
GB 18352.6 Limits and Measurement Methods for Emissions from Light-duty Vehicles
GB/T 19596 Terminology of Electric Vehicles
GB/T 27840 Fuel Consumption Test Methods for Heavy-duty Commercial Vehicles
GB/T 38146.1 China Automotive Test Cycle - Part 1.Light-duty Vehicles
GB/T 38146.2 China Automotive Test Cycle - Part 2.Heavy-duty Commercial Vehicles
3 Terms and Definitions
What is defined in GB/T 15089, GB/T 19596, GB/T 38146.1 and GB/T 38146.2, and the
following terms and definitions are applicable to this document.
3.1 position of measuring temperature
Position of measuring temperature refers to the installation position of temperature sensor.
3.3 transient condition
Transient condition refers to the driving condition, in which, the vehicle speed continuously
changes within a certain period of time.
4 Performance Requirements
In accordance with the test conditions provided in 6.2.2,
5 Test Conditions
5.1 Test Instrument
The measurement parameters, unit and accuracy requirements of the test instrument are shown
in Table 1.
5.2 Test Environment
5.2.1 General requirements
The test can be carried out under the conditions of road environment or laboratory environment.
The conditions of road environment shall comply with the requirements of 5.2.2; the conditions
of laboratory environment shall comply with the requirements of 5.2.3.
5.3 Test Vehicle
5.4 Other Test Conditions
5.4.1 Road test
The road test shall comply with the requirements of GB/T 12534.
5.4.2 Laboratory test
6 Test Methods
6.1 Arrangement of Position of Measuring Temperature
6.1.1 The requirements for the position of measuring temperature in the vehicle are shown in
Table 2.The seat should be placed in the middle position, and the seat back should be adjusted
to the vehicle design state. Other positions of measuring temperature can be set in accordance
with the test demands.
6.1.2 When conducting the test under outdoor environmental conditions, the average
temperature of the two positions of measuring temperature 20 mm away from the center of the
left and right rearview mirrors shall be taken as the temperature of the outdoor position of
measuring temperature. The position of measuring temperature shall avoid direct sunlight.
6.2 Test Conditions
6.2.1 Selection of test conditions
In accordance with the steady state condition provided in 6.2.2, conduct the heating
performance test. The heating performance test can be carried out through the mode of road test
or laboratory test.
6.2.3 Transient condition
The transient condition for the heating performance test of motor vehicle is shown in Appendix
A.
6.3 Test Procedures
6.3.1 Road test procedures
6.3.2 Laboratory test procedures
6.3.2.1 For Category-M1 and Category-N1 vehicles, as well as Category-M2 vehicles whose
maximum design total mass does not exceed 3,500 kg, the setting of chassis dynamometer shall
be carried out in accordance with the requirements provided in GB 18352.6; for Category-M
and Category-N vehicles whose maximum design total mass is greater than 3,500 kg, the setting
of chassis dynamometer shall be carried out in accordance with the requirements provided in
GB/T 27840.The head-on fan shall be set to the vehicle speed following mode.
6.3.2.2 The presetting, inspection and preparation of the test vehicle shall be carried out in
accordance with the requirements provided in 6.3.1.1 ~ 6.3.1.3.
6.4 Test Records
In accordance with the test demands, record each parameter. For parameters that need
continuous measurement, the measurement frequency should not be lower than 0.1 Hz.
7 Test Data Processing and Test Report
7.1 Record and draw the temperature - time change curve of each position of measuring
temperature. The form of the test report is shown in Appendix B. The format of the test data
record sheet is shown in Table B.1.
Appendix A
(informative)
Transient Condition and Data of Heating Performance of Chinese Motor Vehicles
A.1 Transient Condition
A.1.1 Heating condition of Category-M1 and N1 vehicles, as well as Category-M2 vehicles
whose maximum design total mass does not exceed 3,500 kg
For Category-M1 and Category-N1 vehicles, as well as Category-M2 vehicles whose maximum
design total mass does not exceed 3,500 kg, the transient test of heating performance shall be
carried out in accordance with the conditions shown in Figure A.1, and the condition data is
shown in Table A.1.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 12782-2022 be delivered?Answer: The full copy PDF of English version of GB/T 12782-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 12782-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12782-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 12782-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 12782-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12782-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 12782-2022?A step-by-step guide to download PDF of GB/T 12782-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 12782-2022".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|