GB/T 1232.3-2021_English: PDF (GB/T1232.3-2021)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 1232.3-2021 | English | 115 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
| Valid |
GB/T 1232.3-2021
|
| Standard ID | GB/T 1232.3-2021 (GB/T1232.3-2021) | | Description (Translated English) | Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G40 | | Classification of International Standard | 83.060 | | Word Count Estimation | 6,683 | | Date of Issue | 2021-10-11 | | Date of Implementation | 2022-05-01 | | Drafting Organization | Sailun Group Co., Ltd., Xuzhou Xulun Rubber Co., Ltd., Wanli Tire Co., Ltd., Shandong Linglong Tire Co., Ltd., Double Star Group Co., Ltd., Guizhou Tire Co., Ltd., Gotwell Scientific Instruments (Qingdao) Co., Ltd. Company, Triangle Tire Co., Ltd., Fengshen Tire Co., Ltd., Jiangsu Mingzhu Testing Machinery Co., Ltd., Hebei Huami New Material Technology Co., Ltd., Beijing Rubber Industry Research and Design Institute Co., Ltd. | | Administrative Organization | National Rubber and Rubber Products Standardization Technical Committee General Test Method Subcommittee (SAC/TC 35/SC 2) | | Regulation (derived from) | National Standard Announcement No. 12 of 2021 | | Proposing organization | China Petroleum and Chemical Industry Federation | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration |
GB/T 1232.3-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.060
CCS G 40
GB/T 1232.3-2021 / ISO 289-3:2015
Rubber, Unvulcanized - Determinations Using a Shearing-disc
Viscometer - Part 3: Determination of the Delta Mooney Value
for Non-pigmented, Oil-extended Emulsion-polymerized SBR
(ISO 289-3:2015, IDT)
ISSUED ON: OCTOBER 11, 2021
IMPLEMENTED ON: MAY 1, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
Introduction ... 5
1 Scope ... 6
2 Normative References ... 6
3 Terms and Definitions ... 6
4 Principle ... 7
5 Test Instrument ... 8
6 Calibration ... 8
7 Specimen Preparation ... 8
8 Test Temperature ... 8
9 Test Procedures ... 8
10 Result Calculation and Expression ... 9
11 Test Report ... 9
Rubber, Unvulcanized - Determinations Using a Shearing-
disc Viscometer - Part 3: Determination of the Delta Mooney
Value for Non-pigmented, Oil-extended Emulsion-
polymerized SBR
WARNING---the personnel adopting this document shall have practical experience in
formal laboratory work. This document does not point out all possible safety issues, and
the user is responsible for taking appropriate safety and health measures and ensuring
the compliance with the conditions stipulated in the relevant national laws and regulations.
1 Scope
This document describes the method of determining the Delta Mooney value for non-pigmented,
oil-extended emulsion-polymerized SBR.
This document is applicable to the determination of the Delta Mooney value for non-pigmented,
oil-extended emulsion-polymerized SBR.
2 Normative References
The contents of the following documents constitute indispensable clauses of this document
through the normative references in the text. In terms of references with a specified date, only
versions with a specified date are applicable to this document. In terms of references without a
specified date, the latest version (including all the modifications) is applicable to this document.
ISO 289-1 Rubber, Unvulcanized - Determinations Using a Shear-disc Viscometer - Part 1:
Determination of Mooney Viscosity
ISO 1795 Rubber, Raw Nature and Raw Synthetic - Sampling and Further Preparative
Procedures
3 Terms and Definitions
The following terms and definitions are applicable to this document.
3.1 Delta Mooney A values
NOTE: “massed specimen” is called “homogenized specimen” in ISO 1795. Likewise, “unmassed
Description of indexes:
X---time, min;
Y---Mooney viscosity;
a The rotor starts to rotate.
Figure 1 -- Mooney Viscosity Curve Graph
5 Test Instrument
The instrument shall comply with the stipulations of ISO 289-1.
6 Calibration
The equipment shall be calibrated in accordance with ISO 289-1.
7 Specimen Preparation
Ensure that there is no residual air in the unmassed specimen and the surface is smooth and flat,
so as to prevent air from entering between the specimen and the rotor or mold cavity surface.
The specimen can be prepared by compacting it in a mold at 23 C 2 C for 5 min; after taking
it out, let it stand for 15 min to relax.
The massed (homogenized) samples shall be prepared in accordance with ISO 1795.
The specimens shall be prepared from the samples in accordance with ISO 289-1.
8 Test Temperature
The test temperature is 100 C 0.5 C, which is the temperature of the closed mold cavity
when the rotor of the closed mold cavity is running without load.
9 Test Procedures
In accordance with the procedures described in ISO 289-1, carry out the test, using the large
rotor. The pre-heating time is 1 min, and the test duration is 7 min or 15 min.
If the equipment cannot continuously record the Mooney viscosity value during the test, a curve
graph needs to be drawn in accordance with the stipulations of ISO 289-1.
NOTE: the use of automatic recorders is highly recommended.
......
|